@@ -4,6 +4,25 @@ config BR2_TARGET_UBOOT
Build "Das U-Boot" Boot Monitor
if BR2_TARGET_UBOOT
+choice
+ prompt "Build system"
+ default BR2_TARGET_UBOOT_BUILD_SYSTEM_KBUILD
+
+config BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY
+ bool "Legacy"
+ help
+ Select this option if you use an old U-Boot (older than 2015.04),
+ so that we use the old build system.
+
+config BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG
+ bool "Kconfig"
+ help
+ Select this option if you use a recent U-Boot version (2015.04 or
+ newer), so that we use the Kconfig build system.
+
+endchoice
+
+if BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY
config BR2_TARGET_UBOOT_BOARDNAME
string "U-Boot board name"
help
@@ -11,6 +30,7 @@ config BR2_TARGET_UBOOT_BOARDNAME
This will be suffixed with _config to meet U-Boot standard naming.
See boards.cfg in U-Boot source code for the list of available
configurations.
+endif
choice
prompt "U-Boot Version"
@@ -92,6 +112,33 @@ config BR2_TARGET_UBOOT_PATCH
Most users may leave this empty
+if BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG
+choice
+ prompt "U-Boot configuration"
+ default BR2_TARGET_UBOOT_USE_DEFCONFIG
+
+config BR2_TARGET_UBOOT_USE_DEFCONFIG
+ bool "Using an in-tree board defconfig file"
+
+config BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG
+ bool "Using a custom board (def)config file"
+
+endchoice
+
+config BR2_TARGET_UBOOT_BOARD_DEFCONFIG
+ string "Board defconfig"
+ depends on BR2_TARGET_UBOOT_USE_DEFCONFIG
+ help
+ Name of the board for which U-Boot should be built, without
+ the _defconfig suffix.
+
+config BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE
+ string "Configuration file path"
+ depends on BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG
+ help
+ Path to the U-Boot configuration file.
+endif
+
choice
prompt "U-Boot binary format"
default BR2_TARGET_UBOOT_FORMAT_BIN
@@ -127,11 +127,24 @@ define UBOOT_APPLY_LOCAL_PATCHES
endef
UBOOT_POST_PATCH_HOOKS += UBOOT_APPLY_LOCAL_PATCHES
+ifeq ($(BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY),y)
define UBOOT_CONFIGURE_CMDS
$(TARGET_CONFIGURE_OPTS) \
$(MAKE) -C $(@D) $(UBOOT_MAKE_OPTS) \
$(UBOOT_BOARD_NAME)_config
endef
+else ifeq ($(BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG),y)
+ifeq ($(BR2_TARGET_UBOOT_USE_DEFCONFIG),y)
+UBOOT_SOURCE_CONFIG = $(UBOOT_DIR)/configs/$(call qstrip,\
+ $(BR2_TARGET_UBOOT_BOARD_DEFCONFIG))_defconfig
+else ifeq ($(BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG),y)
+UBOOT_SOURCE_CONFIG = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE))
+endif # BR2_TARGET_UBOOT_USE_DEFCONFIG
+
+UBOOT_KCONFIG_FILE = $(UBOOT_SOURCE_CONFIG)
+UBOOT_KCONFIG_EDITORS = menuconfig xconfig gconfig nconfig
+UBOOT_KCONFIG_OPTS = $(UBOOT_MAKE_OPTS)
+endif # BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY
define UBOOT_BUILD_CMDS
$(TARGET_CONFIGURE_OPTS) \
@@ -194,12 +207,24 @@ endif
UBOOT_DEPENDENCIES += host-uboot-tools
endif
-$(eval $(generic-package))
-
ifeq ($(BR2_TARGET_UBOOT)$(BR_BUILDING),yy)
+
+ifeq ($(BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY),y)
ifeq ($(UBOOT_BOARD_NAME),)
$(error No U-Boot board name set. Check your BR2_TARGET_UBOOT_BOARDNAME setting)
-endif
+endif # UBOOT_BOARD_NAME
+else ifeq ($(BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG),y)
+ifeq ($(BR2_TARGET_UBOOT_USE_DEFCONFIG),y)
+ifeq ($(call qstrip,$(BR2_TARGET_UBOOT_BOARD_DEFCONFIG)),)
+$(error No board defconfig name specified, check your BR2_TARGET_UBOOT_DEFCONFIG setting)
+endif # qstrip BR2_TARGET_UBOOT_BOARD_DEFCONFIG
+endif # BR2_TARGET_UBOOT_USE_DEFCONFIG
+ifeq ($(BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG),y)
+ifeq ($(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE)),)
+$(error No board configuration file specified, check your BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE setting)
+endif # qstrip BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE
+endif # BR2_TARGET_UBOOT_USE_CUSTOM_CONFIG
+endif # BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY
ifeq ($(BR2_TARGET_UBOOT_CUSTOM_VERSION),y)
ifeq ($(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE)),)
@@ -223,3 +248,9 @@ endif # qstrip BR2_TARGET_UBOOT_CUSTOM_CUSTOM_REPO_VERSION
endif # BR2_TARGET_UBOOT_CUSTOM_GIT || BR2_TARGET_UBOOT_CUSTOM_HG
endif # BR2_TARGET_UBOOT && BR_BUILDING
+
+ifeq ($(BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY),y)
+$(eval $(generic-package))
+else ifeq ($(BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG),y)
+$(eval $(kconfig-package))
+endif # BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY
With the patchset "kconfig: turnaround into single .config" [http://lists.denx.de/pipermail/u-boot/2015-February/205490.html] U-Boot switched to a single .config file for board configuration. This allows us to use the kconfig-package infrastructure. For providing backward compatibility with older U-Boot version a user choice between the new Kconfig and the legacy build system is introduced. Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks> --- Changes v3 -> v4: - check for config file before calling kconfig-package - remove misleading text from commit log Changes v2 -> v3: - rebase (Yegor) Changes v1 -> v2: - rebase (Thomas) - fix U-Boot version in Legacy help text (Thomas) - do not set Kconfig as default (Thomas) - fix (def)config input check --- boot/uboot/Config.in | 47 +++++++++++++++++++++++++++++++++++++++++++++++ boot/uboot/uboot.mk | 37 ++++++++++++++++++++++++++++++++++--- 2 files changed, 81 insertions(+), 3 deletions(-)