| Message ID | 559E8A1E.1060002@cumulusnetworks.com |
|---|---|
| State | RFC, archived |
| Delegated to: | stephen hemminger |
| Headers | show |
On Thu, Jul 09, 2015 at 04:50:06PM +0200, Nikolay Aleksandrov wrote: > On 07/09/2015 04:13 PM, Miha Marolt wrote: > > Hi! > > > > I hope this is the right place to reports bugs. I apologize if it isn't. > > > > I have written a C program (see below for source code) that opens a raw socket on CentOS 7.1 Linux and binds it to some address (it doesn't use the port that I supplied, but that is not the point here). The "netstat" program correctly recognizes the socket as "raw", while "ss" program says it is "udp". Here are the relevant lines from the ss and netstat commands: > > > > $ netstat -an > > raw 0 0 127.0.0.1:6 0.0.0.0:* 7 > > > > $ ./ss -an > > udp UNCONN 21569 0 127.0.0.1:6 *:* > > > > Here is the version information > > > > $ netstat --version # From CentOS 7.1. > > net-tools 2.10-alpha > > > > $ ./ss --version # Built from git. > > ss utility, iproute2-ss150626 > > > > > > C source follows. If you store it in "main.c", then compile it with "$ gcc main.c -o main" and then run it by executing "$ sudo ./main". > > > > #include <arpa/inet.h> > > #include <assert.h> > > #include <sys/socket.h> > > #include <stdio.h> > > #include <unistd.h> > > > > > > int main(void) > > { > > // Create a raw socket. > > int sock = socket(AF_INET, SOCK_RAW, IPPROTO_TCP); > > if (sock == -1) { perror(NULL); goto exc_cleanup; } > > > > // Bind socket to an address. > > struct sockaddr_in addr; > > addr.sin_family = AF_INET; > > inet_pton(AF_INET, "127.0.0.1", &addr.sin_addr); > > addr.sin_port = htons(27183); > > > > int rc = bind(sock, (struct sockaddr*)&addr, sizeof(addr)); > > if (rc != 0) { perror(NULL); goto exc_cleanup; } > > > > // Wait until user presses <ENTER>. > > printf("\nPress <ENTER> to quit the program.\n"); > > getchar(); > > > > exc_cleanup: > > assert(!close(sock)); > > } > > > > > > Best regards, > > Miha > > > Hi, > I think this was changed by commit: > 8250bc9ff4e5 ("ss: Unify inet sockets output") > Because dgram_show_line() is used for both UDP and RAW sockets > IPPROTO_UDP is used for both now and proto_name() returns "udp". > CCed the patch author and attached a possible solution. > > Cheers, > Nik > diff --git a/misc/ss.c b/misc/ss.c > index 870cad185341..4de77e92c319 100644 > --- a/misc/ss.c > +++ b/misc/ss.c > @@ -1554,6 +1554,8 @@ out: > static char *proto_name(int protocol) > { > switch (protocol) { > + case IPPROTO_RAW: > + return "raw"; > case IPPROTO_UDP: > return "udp"; > case IPPROTO_TCP: > @@ -2398,7 +2400,7 @@ static int dgram_show_line(char *line, const struct filter *f, int family) > if (n < 9) > opt[0] = 0; > > - inet_stats_print(&s, IPPROTO_UDP); > + inet_stats_print(&s, dg_proto == UDP_PROTO ? IPPROTO_UDP : IPPROTO_RAW); > > if (show_details && opt[0]) > printf(" opt:\"%s\"", opt); Yeah, it fixed the issue, just tested the fix. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/09/2015 04:55 PM, Vadim Kochan wrote: > On Thu, Jul 09, 2015 at 04:50:06PM +0200, Nikolay Aleksandrov wrote: >> On 07/09/2015 04:13 PM, Miha Marolt wrote: >>> Hi! >>> >>> I hope this is the right place to reports bugs. I apologize if it isn't. >>> >>> I have written a C program (see below for source code) that opens a raw socket on CentOS 7.1 Linux and binds it to some address (it doesn't use the port that I supplied, but that is not the point here). The "netstat" program correctly recognizes the socket as "raw", while "ss" program says it is "udp". Here are the relevant lines from the ss and netstat commands: >>> >>> $ netstat -an >>> raw 0 0 127.0.0.1:6 0.0.0.0:* 7 >>> >>> $ ./ss -an >>> udp UNCONN 21569 0 127.0.0.1:6 *:* >>> >>> Here is the version information >>> >>> $ netstat --version # From CentOS 7.1. >>> net-tools 2.10-alpha >>> >>> $ ./ss --version # Built from git. >>> ss utility, iproute2-ss150626 >>> >>> >>> C source follows. If you store it in "main.c", then compile it with "$ gcc main.c -o main" and then run it by executing "$ sudo ./main". >>> >>> #include <arpa/inet.h> >>> #include <assert.h> >>> #include <sys/socket.h> >>> #include <stdio.h> >>> #include <unistd.h> >>> >>> >>> int main(void) >>> { >>> // Create a raw socket. >>> int sock = socket(AF_INET, SOCK_RAW, IPPROTO_TCP); >>> if (sock == -1) { perror(NULL); goto exc_cleanup; } >>> >>> // Bind socket to an address. >>> struct sockaddr_in addr; >>> addr.sin_family = AF_INET; >>> inet_pton(AF_INET, "127.0.0.1", &addr.sin_addr); >>> addr.sin_port = htons(27183); >>> >>> int rc = bind(sock, (struct sockaddr*)&addr, sizeof(addr)); >>> if (rc != 0) { perror(NULL); goto exc_cleanup; } >>> >>> // Wait until user presses <ENTER>. >>> printf("\nPress <ENTER> to quit the program.\n"); >>> getchar(); >>> >>> exc_cleanup: >>> assert(!close(sock)); >>> } >>> >>> >>> Best regards, >>> Miha >> >> >> Hi, >> I think this was changed by commit: >> 8250bc9ff4e5 ("ss: Unify inet sockets output") >> Because dgram_show_line() is used for both UDP and RAW sockets >> IPPROTO_UDP is used for both now and proto_name() returns "udp". >> CCed the patch author and attached a possible solution. >> >> Cheers, >> Nik > >> diff --git a/misc/ss.c b/misc/ss.c >> index 870cad185341..4de77e92c319 100644 >> --- a/misc/ss.c >> +++ b/misc/ss.c >> @@ -1554,6 +1554,8 @@ out: >> static char *proto_name(int protocol) >> { >> switch (protocol) { >> + case IPPROTO_RAW: >> + return "raw"; >> case IPPROTO_UDP: >> return "udp"; >> case IPPROTO_TCP: >> @@ -2398,7 +2400,7 @@ static int dgram_show_line(char *line, const struct filter *f, int family) >> if (n < 9) >> opt[0] = 0; >> >> - inet_stats_print(&s, IPPROTO_UDP); >> + inet_stats_print(&s, dg_proto == UDP_PROTO ? IPPROTO_UDP : IPPROTO_RAW); >> >> if (show_details && opt[0]) >> printf(" opt:\"%s\"", opt); > > Yeah, it fixed the issue, just tested the fix. > Great, I'll submit it in a minute. Thanks for testing! -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/09/2015 04:57 PM, Nikolay Aleksandrov wrote: > On 07/09/2015 04:55 PM, Vadim Kochan wrote: >> On Thu, Jul 09, 2015 at 04:50:06PM +0200, Nikolay Aleksandrov wrote: >>> On 07/09/2015 04:13 PM, Miha Marolt wrote: >>>> Hi! >>>> >>>> I hope this is the right place to reports bugs. I apologize if it isn't. >>>> >>>> I have written a C program (see below for source code) that opens a raw socket on CentOS 7.1 Linux and binds it to some address (it doesn't use the port that I supplied, but that is not the point here). The "netstat" program correctly recognizes the socket as "raw", while "ss" program says it is "udp". Here are the relevant lines from the ss and netstat commands: >>>> >>>> $ netstat -an >>>> raw 0 0 127.0.0.1:6 0.0.0.0:* 7 >>>> >>>> $ ./ss -an >>>> udp UNCONN 21569 0 127.0.0.1:6 *:* >>>> >>>> Here is the version information >>>> >>>> $ netstat --version # From CentOS 7.1. >>>> net-tools 2.10-alpha >>>> >>>> $ ./ss --version # Built from git. >>>> ss utility, iproute2-ss150626 >>>> >>>> >>>> C source follows. If you store it in "main.c", then compile it with "$ gcc main.c -o main" and then run it by executing "$ sudo ./main". >>>> >>>> #include <arpa/inet.h> >>>> #include <assert.h> >>>> #include <sys/socket.h> >>>> #include <stdio.h> >>>> #include <unistd.h> >>>> >>>> >>>> int main(void) >>>> { >>>> // Create a raw socket. >>>> int sock = socket(AF_INET, SOCK_RAW, IPPROTO_TCP); >>>> if (sock == -1) { perror(NULL); goto exc_cleanup; } >>>> >>>> // Bind socket to an address. >>>> struct sockaddr_in addr; >>>> addr.sin_family = AF_INET; >>>> inet_pton(AF_INET, "127.0.0.1", &addr.sin_addr); >>>> addr.sin_port = htons(27183); >>>> >>>> int rc = bind(sock, (struct sockaddr*)&addr, sizeof(addr)); >>>> if (rc != 0) { perror(NULL); goto exc_cleanup; } >>>> >>>> // Wait until user presses <ENTER>. >>>> printf("\nPress <ENTER> to quit the program.\n"); >>>> getchar(); >>>> >>>> exc_cleanup: >>>> assert(!close(sock)); >>>> } >>>> >>>> >>>> Best regards, >>>> Miha >>> >>> Hi, >>> I think this was changed by commit: >>> 8250bc9ff4e5 ("ss: Unify inet sockets output") >>> Because dgram_show_line() is used for both UDP and RAW sockets >>> IPPROTO_UDP is used for both now and proto_name() returns "udp". >>> CCed the patch author and attached a possible solution. >>> >>> Cheers, >>> Nik >>> diff --git a/misc/ss.c b/misc/ss.c >>> index 870cad185341..4de77e92c319 100644 >>> --- a/misc/ss.c >>> +++ b/misc/ss.c >>> @@ -1554,6 +1554,8 @@ out: >>> static char *proto_name(int protocol) >>> { >>> switch (protocol) { >>> + case IPPROTO_RAW: >>> + return "raw"; >>> case IPPROTO_UDP: >>> return "udp"; >>> case IPPROTO_TCP: >>> @@ -2398,7 +2400,7 @@ static int dgram_show_line(char *line, const struct filter *f, int family) >>> if (n < 9) >>> opt[0] = 0; >>> >>> - inet_stats_print(&s, IPPROTO_UDP); >>> + inet_stats_print(&s, dg_proto == UDP_PROTO ? IPPROTO_UDP : IPPROTO_RAW); >>> >>> if (show_details && opt[0]) >>> printf(" opt:\"%s\"", opt); >> Yeah, it fixed the issue, just tested the fix. >> > Great, I'll submit it in a minute. > Thanks for testing! Thank you very much for the fast fix! I've found another bug: command "$ ss" doesn't display only tcp sockets as the man page ss(8) says (file man/man8/ss.8 in iproute2 git repo). It also displays e.g. unix sockets. The man page says "When no option is used ss displays a list of open non-listening TCP sockets that have established connection.". Regards, Miha -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jul 09, 2015 at 05:09:27PM +0200, Miha Marolt wrote: > > > On 07/09/2015 04:57 PM, Nikolay Aleksandrov wrote: > >On 07/09/2015 04:55 PM, Vadim Kochan wrote: > >>On Thu, Jul 09, 2015 at 04:50:06PM +0200, Nikolay Aleksandrov wrote: > >>>On 07/09/2015 04:13 PM, Miha Marolt wrote: > >>>>Hi! > >>>> > >>>>I hope this is the right place to reports bugs. I apologize if it isn't. > >>>> > >>>>I have written a C program (see below for source code) that opens a raw socket on CentOS 7.1 Linux and binds it to some address (it doesn't use the port that I supplied, but that is not the point here). The "netstat" program correctly recognizes the socket as "raw", while "ss" program says it is "udp". Here are the relevant lines from the ss and netstat commands: > >>>> > >>>>$ netstat -an > >>>>raw 0 0 127.0.0.1:6 0.0.0.0:* 7 > >>>> > >>>>$ ./ss -an > >>>>udp UNCONN 21569 0 127.0.0.1:6 *:* > >>>> > >>>>Here is the version information > >>>> > >>>>$ netstat --version # From CentOS 7.1. > >>>>net-tools 2.10-alpha > >>>> > >>>>$ ./ss --version # Built from git. > >>>>ss utility, iproute2-ss150626 > >>>> > >>>> > >>>>C source follows. If you store it in "main.c", then compile it with "$ gcc main.c -o main" and then run it by executing "$ sudo ./main". > >>>> > >>>>#include <arpa/inet.h> > >>>>#include <assert.h> > >>>>#include <sys/socket.h> > >>>>#include <stdio.h> > >>>>#include <unistd.h> > >>>> > >>>> > >>>>int main(void) > >>>>{ > >>>> // Create a raw socket. > >>>> int sock = socket(AF_INET, SOCK_RAW, IPPROTO_TCP); > >>>> if (sock == -1) { perror(NULL); goto exc_cleanup; } > >>>> > >>>> // Bind socket to an address. > >>>> struct sockaddr_in addr; > >>>> addr.sin_family = AF_INET; > >>>> inet_pton(AF_INET, "127.0.0.1", &addr.sin_addr); > >>>> addr.sin_port = htons(27183); > >>>> > >>>> int rc = bind(sock, (struct sockaddr*)&addr, sizeof(addr)); > >>>> if (rc != 0) { perror(NULL); goto exc_cleanup; } > >>>> > >>>> // Wait until user presses <ENTER>. > >>>> printf("\nPress <ENTER> to quit the program.\n"); > >>>> getchar(); > >>>> > >>>>exc_cleanup: > >>>> assert(!close(sock)); > >>>>} > >>>> > >>>> > >>>>Best regards, > >>>>Miha > >>> > >>>Hi, > >>>I think this was changed by commit: > >>>8250bc9ff4e5 ("ss: Unify inet sockets output") > >>>Because dgram_show_line() is used for both UDP and RAW sockets > >>>IPPROTO_UDP is used for both now and proto_name() returns "udp". > >>>CCed the patch author and attached a possible solution. > >>> > >>>Cheers, > >>> Nik > >>>diff --git a/misc/ss.c b/misc/ss.c > >>>index 870cad185341..4de77e92c319 100644 > >>>--- a/misc/ss.c > >>>+++ b/misc/ss.c > >>>@@ -1554,6 +1554,8 @@ out: > >>> static char *proto_name(int protocol) > >>> { > >>> switch (protocol) { > >>>+ case IPPROTO_RAW: > >>>+ return "raw"; > >>> case IPPROTO_UDP: > >>> return "udp"; > >>> case IPPROTO_TCP: > >>>@@ -2398,7 +2400,7 @@ static int dgram_show_line(char *line, const struct filter *f, int family) > >>> if (n < 9) > >>> opt[0] = 0; > >>>- inet_stats_print(&s, IPPROTO_UDP); > >>>+ inet_stats_print(&s, dg_proto == UDP_PROTO ? IPPROTO_UDP : IPPROTO_RAW); > >>> if (show_details && opt[0]) > >>> printf(" opt:\"%s\"", opt); > >>Yeah, it fixed the issue, just tested the fix. > >> > >Great, I'll submit it in a minute. > >Thanks for testing! > > Thank you very much for the fast fix! > > I've found another bug: command "$ ss" doesn't display only tcp sockets as > the man page ss(8) says (file man/man8/ss.8 in iproute2 git repo). It also > displays e.g. unix sockets. The man page says "When no option is used ss > displays a list of open non-listening TCP sockets that have established > connection.". > > > Regards, > Miha That seems OK, I see that unix stream sockets are displayed which are connection oriented, and UDP can also have established state. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/09/2015 05:15 PM, Vadim Kochan wrote: > On Thu, Jul 09, 2015 at 05:09:27PM +0200, Miha Marolt wrote: >> >> On 07/09/2015 04:57 PM, Nikolay Aleksandrov wrote: >>> On 07/09/2015 04:55 PM, Vadim Kochan wrote: >>>> On Thu, Jul 09, 2015 at 04:50:06PM +0200, Nikolay Aleksandrov wrote: >>>>> On 07/09/2015 04:13 PM, Miha Marolt wrote: >>>>>> Hi! >>>>>> >>>>>> I hope this is the right place to reports bugs. I apologize if it isn't. >>>>>> >>>>>> I have written a C program (see below for source code) that opens a raw socket on CentOS 7.1 Linux and binds it to some address (it doesn't use the port that I supplied, but that is not the point here). The "netstat" program correctly recognizes the socket as "raw", while "ss" program says it is "udp". Here are the relevant lines from the ss and netstat commands: >>>>>> >>>>>> $ netstat -an >>>>>> raw 0 0 127.0.0.1:6 0.0.0.0:* 7 >>>>>> >>>>>> $ ./ss -an >>>>>> udp UNCONN 21569 0 127.0.0.1:6 *:* >>>>>> >>>>>> Here is the version information >>>>>> >>>>>> $ netstat --version # From CentOS 7.1. >>>>>> net-tools 2.10-alpha >>>>>> >>>>>> $ ./ss --version # Built from git. >>>>>> ss utility, iproute2-ss150626 >>>>>> >>>>>> >>>>>> C source follows. If you store it in "main.c", then compile it with "$ gcc main.c -o main" and then run it by executing "$ sudo ./main". >>>>>> >>>>>> #include <arpa/inet.h> >>>>>> #include <assert.h> >>>>>> #include <sys/socket.h> >>>>>> #include <stdio.h> >>>>>> #include <unistd.h> >>>>>> >>>>>> >>>>>> int main(void) >>>>>> { >>>>>> // Create a raw socket. >>>>>> int sock = socket(AF_INET, SOCK_RAW, IPPROTO_TCP); >>>>>> if (sock == -1) { perror(NULL); goto exc_cleanup; } >>>>>> >>>>>> // Bind socket to an address. >>>>>> struct sockaddr_in addr; >>>>>> addr.sin_family = AF_INET; >>>>>> inet_pton(AF_INET, "127.0.0.1", &addr.sin_addr); >>>>>> addr.sin_port = htons(27183); >>>>>> >>>>>> int rc = bind(sock, (struct sockaddr*)&addr, sizeof(addr)); >>>>>> if (rc != 0) { perror(NULL); goto exc_cleanup; } >>>>>> >>>>>> // Wait until user presses <ENTER>. >>>>>> printf("\nPress <ENTER> to quit the program.\n"); >>>>>> getchar(); >>>>>> >>>>>> exc_cleanup: >>>>>> assert(!close(sock)); >>>>>> } >>>>>> >>>>>> >>>>>> Best regards, >>>>>> Miha >>>>> Hi, >>>>> I think this was changed by commit: >>>>> 8250bc9ff4e5 ("ss: Unify inet sockets output") >>>>> Because dgram_show_line() is used for both UDP and RAW sockets >>>>> IPPROTO_UDP is used for both now and proto_name() returns "udp". >>>>> CCed the patch author and attached a possible solution. >>>>> >>>>> Cheers, >>>>> Nik >>>>> diff --git a/misc/ss.c b/misc/ss.c >>>>> index 870cad185341..4de77e92c319 100644 >>>>> --- a/misc/ss.c >>>>> +++ b/misc/ss.c >>>>> @@ -1554,6 +1554,8 @@ out: >>>>> static char *proto_name(int protocol) >>>>> { >>>>> switch (protocol) { >>>>> + case IPPROTO_RAW: >>>>> + return "raw"; >>>>> case IPPROTO_UDP: >>>>> return "udp"; >>>>> case IPPROTO_TCP: >>>>> @@ -2398,7 +2400,7 @@ static int dgram_show_line(char *line, const struct filter *f, int family) >>>>> if (n < 9) >>>>> opt[0] = 0; >>>>> - inet_stats_print(&s, IPPROTO_UDP); >>>>> + inet_stats_print(&s, dg_proto == UDP_PROTO ? IPPROTO_UDP : IPPROTO_RAW); >>>>> if (show_details && opt[0]) >>>>> printf(" opt:\"%s\"", opt); >>>> Yeah, it fixed the issue, just tested the fix. >>>> >>> Great, I'll submit it in a minute. >>> Thanks for testing! >> Thank you very much for the fast fix! >> >> I've found another bug: command "$ ss" doesn't display only tcp sockets as >> the man page ss(8) says (file man/man8/ss.8 in iproute2 git repo). It also >> displays e.g. unix sockets. The man page says "When no option is used ss >> displays a list of open non-listening TCP sockets that have established >> connection.". >> >> >> Regards, >> Miha > That seems OK, I see that unix stream sockets are displayed which are > connection oriented, and UDP can also have established state. According to the man page, **only** TCP sockets should be listed by "$ ss". In reality, also Unix and UDP sockets are listed, so there is a discrepancy between what man page says and what actually happens. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jul 10, 2015 at 09:09:46AM +0200, Miha Marolt wrote: > > > On 07/09/2015 05:15 PM, Vadim Kochan wrote: > >On Thu, Jul 09, 2015 at 05:09:27PM +0200, Miha Marolt wrote: > >> > >>On 07/09/2015 04:57 PM, Nikolay Aleksandrov wrote: > >>>On 07/09/2015 04:55 PM, Vadim Kochan wrote: > >>>>On Thu, Jul 09, 2015 at 04:50:06PM +0200, Nikolay Aleksandrov wrote: > >>>>>On 07/09/2015 04:13 PM, Miha Marolt wrote: > >>>>>>Hi! > >>>>>> > >>>>>>I hope this is the right place to reports bugs. I apologize if it isn't. > >>>>>> > >>>>>>I have written a C program (see below for source code) that opens a raw socket on CentOS 7.1 Linux and binds it to some address (it doesn't use the port that I supplied, but that is not the point here). The "netstat" program correctly recognizes the socket as "raw", while "ss" program says it is "udp". Here are the relevant lines from the ss and netstat commands: > >>>>>> > >>>>>>$ netstat -an > >>>>>>raw 0 0 127.0.0.1:6 0.0.0.0:* 7 > >>>>>> > >>>>>>$ ./ss -an > >>>>>>udp UNCONN 21569 0 127.0.0.1:6 *:* > >>>>>> > >>>>>>Here is the version information > >>>>>> > >>>>>>$ netstat --version # From CentOS 7.1. > >>>>>>net-tools 2.10-alpha > >>>>>> > >>>>>>$ ./ss --version # Built from git. > >>>>>>ss utility, iproute2-ss150626 > >>>>>> > >>>>>> > >>>>>>C source follows. If you store it in "main.c", then compile it with "$ gcc main.c -o main" and then run it by executing "$ sudo ./main". > >>>>>> > >>>>>>#include <arpa/inet.h> > >>>>>>#include <assert.h> > >>>>>>#include <sys/socket.h> > >>>>>>#include <stdio.h> > >>>>>>#include <unistd.h> > >>>>>> > >>>>>> > >>>>>>int main(void) > >>>>>>{ > >>>>>> // Create a raw socket. > >>>>>> int sock = socket(AF_INET, SOCK_RAW, IPPROTO_TCP); > >>>>>> if (sock == -1) { perror(NULL); goto exc_cleanup; } > >>>>>> > >>>>>> // Bind socket to an address. > >>>>>> struct sockaddr_in addr; > >>>>>> addr.sin_family = AF_INET; > >>>>>> inet_pton(AF_INET, "127.0.0.1", &addr.sin_addr); > >>>>>> addr.sin_port = htons(27183); > >>>>>> > >>>>>> int rc = bind(sock, (struct sockaddr*)&addr, sizeof(addr)); > >>>>>> if (rc != 0) { perror(NULL); goto exc_cleanup; } > >>>>>> > >>>>>> // Wait until user presses <ENTER>. > >>>>>> printf("\nPress <ENTER> to quit the program.\n"); > >>>>>> getchar(); > >>>>>> > >>>>>>exc_cleanup: > >>>>>> assert(!close(sock)); > >>>>>>} > >>>>>> > >>>>>> > >>>>>>Best regards, > >>>>>>Miha > >>>>>Hi, > >>>>>I think this was changed by commit: > >>>>>8250bc9ff4e5 ("ss: Unify inet sockets output") > >>>>>Because dgram_show_line() is used for both UDP and RAW sockets > >>>>>IPPROTO_UDP is used for both now and proto_name() returns "udp". > >>>>>CCed the patch author and attached a possible solution. > >>>>> > >>>>>Cheers, > >>>>> Nik > >>>>>diff --git a/misc/ss.c b/misc/ss.c > >>>>>index 870cad185341..4de77e92c319 100644 > >>>>>--- a/misc/ss.c > >>>>>+++ b/misc/ss.c > >>>>>@@ -1554,6 +1554,8 @@ out: > >>>>> static char *proto_name(int protocol) > >>>>> { > >>>>> switch (protocol) { > >>>>>+ case IPPROTO_RAW: > >>>>>+ return "raw"; > >>>>> case IPPROTO_UDP: > >>>>> return "udp"; > >>>>> case IPPROTO_TCP: > >>>>>@@ -2398,7 +2400,7 @@ static int dgram_show_line(char *line, const struct filter *f, int family) > >>>>> if (n < 9) > >>>>> opt[0] = 0; > >>>>>- inet_stats_print(&s, IPPROTO_UDP); > >>>>>+ inet_stats_print(&s, dg_proto == UDP_PROTO ? IPPROTO_UDP : IPPROTO_RAW); > >>>>> if (show_details && opt[0]) > >>>>> printf(" opt:\"%s\"", opt); > >>>>Yeah, it fixed the issue, just tested the fix. > >>>> > >>>Great, I'll submit it in a minute. > >>>Thanks for testing! > >>Thank you very much for the fast fix! > >> > >>I've found another bug: command "$ ss" doesn't display only tcp sockets as > >>the man page ss(8) says (file man/man8/ss.8 in iproute2 git repo). It also > >>displays e.g. unix sockets. The man page says "When no option is used ss > >>displays a list of open non-listening TCP sockets that have established > >>connection.". > >> > >> > >>Regards, > >>Miha > >That seems OK, I see that unix stream sockets are displayed which are > >connection oriented, and UDP can also have established state. > > According to the man page, **only** TCP sockets should be listed by "$ ss". > In reality, also Unix and UDP sockets are listed, so there is a discrepancy > between what man page says and what actually happens. Yes, you are right man page says so, but seems such behaviour is for a long time and may be it is better to change man page rather than change the default behaviour. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/10/2015 09:16 AM, Vadim Kochan wrote: > On Fri, Jul 10, 2015 at 09:09:46AM +0200, Miha Marolt wrote: >> >> On 07/09/2015 05:15 PM, Vadim Kochan wrote: >>> On Thu, Jul 09, 2015 at 05:09:27PM +0200, Miha Marolt wrote: >>>> On 07/09/2015 04:57 PM, Nikolay Aleksandrov wrote: >>>>> On 07/09/2015 04:55 PM, Vadim Kochan wrote: >>>>>> On Thu, Jul 09, 2015 at 04:50:06PM +0200, Nikolay Aleksandrov wrote: >>>>>>> On 07/09/2015 04:13 PM, Miha Marolt wrote: >>>>>>>> Hi! >>>>>>>> >>>>>>>> I hope this is the right place to reports bugs. I apologize if it isn't. >>>>>>>> >>>>>>>> I have written a C program (see below for source code) that opens a raw socket on CentOS 7.1 Linux and binds it to some address (it doesn't use the port that I supplied, but that is not the point here). The "netstat" program correctly recognizes the socket as "raw", while "ss" program says it is "udp". Here are the relevant lines from the ss and netstat commands: >>>>>>>> >>>>>>>> $ netstat -an >>>>>>>> raw 0 0 127.0.0.1:6 0.0.0.0:* 7 >>>>>>>> >>>>>>>> $ ./ss -an >>>>>>>> udp UNCONN 21569 0 127.0.0.1:6 *:* >>>>>>>> >>>>>>>> Here is the version information >>>>>>>> >>>>>>>> $ netstat --version # From CentOS 7.1. >>>>>>>> net-tools 2.10-alpha >>>>>>>> >>>>>>>> $ ./ss --version # Built from git. >>>>>>>> ss utility, iproute2-ss150626 >>>>>>>> >>>>>>>> >>>>>>>> C source follows. If you store it in "main.c", then compile it with "$ gcc main.c -o main" and then run it by executing "$ sudo ./main". >>>>>>>> >>>>>>>> #include <arpa/inet.h> >>>>>>>> #include <assert.h> >>>>>>>> #include <sys/socket.h> >>>>>>>> #include <stdio.h> >>>>>>>> #include <unistd.h> >>>>>>>> >>>>>>>> >>>>>>>> int main(void) >>>>>>>> { >>>>>>>> // Create a raw socket. >>>>>>>> int sock = socket(AF_INET, SOCK_RAW, IPPROTO_TCP); >>>>>>>> if (sock == -1) { perror(NULL); goto exc_cleanup; } >>>>>>>> >>>>>>>> // Bind socket to an address. >>>>>>>> struct sockaddr_in addr; >>>>>>>> addr.sin_family = AF_INET; >>>>>>>> inet_pton(AF_INET, "127.0.0.1", &addr.sin_addr); >>>>>>>> addr.sin_port = htons(27183); >>>>>>>> >>>>>>>> int rc = bind(sock, (struct sockaddr*)&addr, sizeof(addr)); >>>>>>>> if (rc != 0) { perror(NULL); goto exc_cleanup; } >>>>>>>> >>>>>>>> // Wait until user presses <ENTER>. >>>>>>>> printf("\nPress <ENTER> to quit the program.\n"); >>>>>>>> getchar(); >>>>>>>> >>>>>>>> exc_cleanup: >>>>>>>> assert(!close(sock)); >>>>>>>> } >>>>>>>> >>>>>>>> >>>>>>>> Best regards, >>>>>>>> Miha >>>>>>> Hi, >>>>>>> I think this was changed by commit: >>>>>>> 8250bc9ff4e5 ("ss: Unify inet sockets output") >>>>>>> Because dgram_show_line() is used for both UDP and RAW sockets >>>>>>> IPPROTO_UDP is used for both now and proto_name() returns "udp". >>>>>>> CCed the patch author and attached a possible solution. >>>>>>> >>>>>>> Cheers, >>>>>>> Nik >>>>>>> diff --git a/misc/ss.c b/misc/ss.c >>>>>>> index 870cad185341..4de77e92c319 100644 >>>>>>> --- a/misc/ss.c >>>>>>> +++ b/misc/ss.c >>>>>>> @@ -1554,6 +1554,8 @@ out: >>>>>>> static char *proto_name(int protocol) >>>>>>> { >>>>>>> switch (protocol) { >>>>>>> + case IPPROTO_RAW: >>>>>>> + return "raw"; >>>>>>> case IPPROTO_UDP: >>>>>>> return "udp"; >>>>>>> case IPPROTO_TCP: >>>>>>> @@ -2398,7 +2400,7 @@ static int dgram_show_line(char *line, const struct filter *f, int family) >>>>>>> if (n < 9) >>>>>>> opt[0] = 0; >>>>>>> - inet_stats_print(&s, IPPROTO_UDP); >>>>>>> + inet_stats_print(&s, dg_proto == UDP_PROTO ? IPPROTO_UDP : IPPROTO_RAW); >>>>>>> if (show_details && opt[0]) >>>>>>> printf(" opt:\"%s\"", opt); >>>>>> Yeah, it fixed the issue, just tested the fix. >>>>>> >>>>> Great, I'll submit it in a minute. >>>>> Thanks for testing! >>>> Thank you very much for the fast fix! >>>> >>>> I've found another bug: command "$ ss" doesn't display only tcp sockets as >>>> the man page ss(8) says (file man/man8/ss.8 in iproute2 git repo). It also >>>> displays e.g. unix sockets. The man page says "When no option is used ss >>>> displays a list of open non-listening TCP sockets that have established >>>> connection.". >>>> >>>> >>>> Regards, >>>> Miha >>> That seems OK, I see that unix stream sockets are displayed which are >>> connection oriented, and UDP can also have established state. >> According to the man page, **only** TCP sockets should be listed by "$ ss". >> In reality, also Unix and UDP sockets are listed, so there is a discrepancy >> between what man page says and what actually happens. > Yes, you are right man page says so, but seems such behaviour is for a > long time and may be it is better to change man page rather than change > the default behaviour. Hi again! What is the status of these two bugs (raw sockets wrongly being displayed as udp sockets and wrong description in the man page)? According to the git web client [1], fixes haven't been commited yet. How and where can I follow the progress? [1] https://git.kernel.org/cgit/linux/kernel/git/shemminger/iproute2.git/log/ Regards, Miha -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/misc/ss.c b/misc/ss.c index 870cad185341..4de77e92c319 100644 --- a/misc/ss.c +++ b/misc/ss.c @@ -1554,6 +1554,8 @@ out: static char *proto_name(int protocol) { switch (protocol) { + case IPPROTO_RAW: + return "raw"; case IPPROTO_UDP: return "udp"; case IPPROTO_TCP: @@ -2398,7 +2400,7 @@ static int dgram_show_line(char *line, const struct filter *f, int family) if (n < 9) opt[0] = 0; - inet_stats_print(&s, IPPROTO_UDP); + inet_stats_print(&s, dg_proto == UDP_PROTO ? IPPROTO_UDP : IPPROTO_RAW); if (show_details && opt[0]) printf(" opt:\"%s\"", opt);