| Message ID | 1435615523-21039-4-git-send-email-luca@lucaceresoli.net |
|---|---|
| State | Changes Requested |
| Headers | show |
2015-06-30 0:05 GMT+02:00 Luca Ceresoli <luca@lucaceresoli.net>: > Add a defconfig for the Olimex A20-OLinuXino-Micro board, reusing most > of the A20-OLinuXino-Lime files. > > Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> > --- > board/olimex/a20_olinuxino/readme.txt | 31 +++++++++++++------ > configs/olimex_a20_olinuxino_micro_defconfig | 46 ++++++++++++++++++++++++++++ > 2 files changed, 67 insertions(+), 10 deletions(-) > create mode 100644 configs/olimex_a20_olinuxino_micro_defconfig > > diff --git a/board/olimex/a20_olinuxino/readme.txt b/board/olimex/a20_olinuxino/readme.txt > index 6b8391484b92..101adcf6abbd 100644 > --- a/board/olimex/a20_olinuxino/readme.txt > +++ b/board/olimex/a20_olinuxino/readme.txt > @@ -1,10 +1,22 @@ > -A20-OLinuXino-LIME > +A20-OLinuXino-LIME and A20-OLinuXino-MICRO > > Intro > ===== > > -This is a open hardware board, > -see https://www.olimex.com/Products/OLinuXino/open-source-hardware > +These are open hardware boards, both based an the AllWinners A20 SoC. > + > +for more details about the boards see the following pages: > + - https://www.olimex.com/Products/OLinuXino/open-source-hardware > + - https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-MICRO/ > + - https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME/ > + > +The following defconfigs are available: > + - olimex_a20_olinuxino_micro_defconfig > + for the A20-OLinuXino-MICRO board using mainline kernel and U-Boot > + - olimex_a20_olinuxino_lime_defconfig > + for the A20-OLinuXino-LIME board using mainline kernel and U-Boot > + - olimex_a20_olinuxino_lime_mali_defconfig > + for the A20-OLinuXino-LIME board using legacy linux-sunxi kernel and U-Boot > The reference to U-Boot seems useless. François > The legacy linux-sunxi kernels are based on the vendor code drops. > They are only useful when accelerated 3D graphics and multimedia support > @@ -20,11 +32,9 @@ the users who do not need fancy 3D graphics or video playback acceleration. > How to build it > =============== > > - $ make olimex_a20_olinuxino_lime_defconfig > - > -or > +Configure Buildroot: > > - $ make olimex_a20_olinuxino_lime_mali_defconfig > + $ make <board>_defconfig > > Compile everything and build the rootfs image: > > @@ -38,8 +48,9 @@ After building, you should get a tree like this: > output/images/ > +-- rootfs.ext2 > +-- rootfs.ext4 -> rootfs.ext2 > - +-- script.bin (mali) > - +-- sun7i-a20-olinuxino-lime.dtb (mainline) > + +-- script.bin (lime_mali) > + +-- sun7i-a20-olinuxino-lime.dtb (lime, mainline) > + +-- sun7i-a20-olinuxino-micro.dtb (micro, mainline) > +-- u-boot.bin > +-- u-boot-sunxi-with-spl.bin > `-- zImage > @@ -98,5 +109,5 @@ Copy images on the SD card > Finish > ====== > > -Eject the SD card, insert it in the A20-OLinuXino-LIME board, and power it up. > +Eject the SD card, insert it in the A20-OLinuXino board, and power it up. >
Dear François, François Perrad wrote: > 2015-06-30 0:05 GMT+02:00 Luca Ceresoli <luca@lucaceresoli.net>: >> Add a defconfig for the Olimex A20-OLinuXino-Micro board, reusing most >> of the A20-OLinuXino-Lime files. >> >> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> >> --- >> board/olimex/a20_olinuxino/readme.txt | 31 +++++++++++++------ >> configs/olimex_a20_olinuxino_micro_defconfig | 46 ++++++++++++++++++++++++++++ >> 2 files changed, 67 insertions(+), 10 deletions(-) >> create mode 100644 configs/olimex_a20_olinuxino_micro_defconfig >> >> diff --git a/board/olimex/a20_olinuxino/readme.txt b/board/olimex/a20_olinuxino/readme.txt >> index 6b8391484b92..101adcf6abbd 100644 >> --- a/board/olimex/a20_olinuxino/readme.txt >> +++ b/board/olimex/a20_olinuxino/readme.txt >> @@ -1,10 +1,22 @@ >> -A20-OLinuXino-LIME >> +A20-OLinuXino-LIME and A20-OLinuXino-MICRO >> >> Intro >> ===== >> >> -This is a open hardware board, >> -see https://www.olimex.com/Products/OLinuXino/open-source-hardware >> +These are open hardware boards, both based an the AllWinners A20 SoC. >> + >> +for more details about the boards see the following pages: >> + - https://www.olimex.com/Products/OLinuXino/open-source-hardware >> + - https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-MICRO/ >> + - https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME/ >> + >> +The following defconfigs are available: >> + - olimex_a20_olinuxino_micro_defconfig >> + for the A20-OLinuXino-MICRO board using mainline kernel and U-Boot >> + - olimex_a20_olinuxino_lime_defconfig >> + for the A20-OLinuXino-LIME board using mainline kernel and U-Boot >> + - olimex_a20_olinuxino_lime_mali_defconfig >> + for the A20-OLinuXino-LIME board using legacy linux-sunxi kernel and U-Boot >> > > The reference to U-Boot seems useless. You're right. Will fix and resend, thanks.
Dear Luca Ceresoli, On Tue, 30 Jun 2015 09:11:55 +0200, Luca Ceresoli wrote: > >> +The following defconfigs are available: > >> + - olimex_a20_olinuxino_micro_defconfig > >> + for the A20-OLinuXino-MICRO board using mainline kernel and U-Boot > >> + - olimex_a20_olinuxino_lime_defconfig > >> + for the A20-OLinuXino-LIME board using mainline kernel and U-Boot > >> + - olimex_a20_olinuxino_lime_mali_defconfig > >> + for the A20-OLinuXino-LIME board using legacy linux-sunxi kernel and U-Boot > >> > > > > The reference to U-Boot seems useless. > > You're right. Will fix and resend, thanks. If that's the only fix, no need to resend, I'll fixup when applying. Thanks, Thomas
diff --git a/board/olimex/a20_olinuxino/readme.txt b/board/olimex/a20_olinuxino/readme.txt index 6b8391484b92..101adcf6abbd 100644 --- a/board/olimex/a20_olinuxino/readme.txt +++ b/board/olimex/a20_olinuxino/readme.txt @@ -1,10 +1,22 @@ -A20-OLinuXino-LIME +A20-OLinuXino-LIME and A20-OLinuXino-MICRO Intro ===== -This is a open hardware board, -see https://www.olimex.com/Products/OLinuXino/open-source-hardware +These are open hardware boards, both based an the AllWinners A20 SoC. + +for more details about the boards see the following pages: + - https://www.olimex.com/Products/OLinuXino/open-source-hardware + - https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-MICRO/ + - https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME/ + +The following defconfigs are available: + - olimex_a20_olinuxino_micro_defconfig + for the A20-OLinuXino-MICRO board using mainline kernel and U-Boot + - olimex_a20_olinuxino_lime_defconfig + for the A20-OLinuXino-LIME board using mainline kernel and U-Boot + - olimex_a20_olinuxino_lime_mali_defconfig + for the A20-OLinuXino-LIME board using legacy linux-sunxi kernel and U-Boot The legacy linux-sunxi kernels are based on the vendor code drops. They are only useful when accelerated 3D graphics and multimedia support @@ -20,11 +32,9 @@ the users who do not need fancy 3D graphics or video playback acceleration. How to build it =============== - $ make olimex_a20_olinuxino_lime_defconfig - -or +Configure Buildroot: - $ make olimex_a20_olinuxino_lime_mali_defconfig + $ make <board>_defconfig Compile everything and build the rootfs image: @@ -38,8 +48,9 @@ After building, you should get a tree like this: output/images/ +-- rootfs.ext2 +-- rootfs.ext4 -> rootfs.ext2 - +-- script.bin (mali) - +-- sun7i-a20-olinuxino-lime.dtb (mainline) + +-- script.bin (lime_mali) + +-- sun7i-a20-olinuxino-lime.dtb (lime, mainline) + +-- sun7i-a20-olinuxino-micro.dtb (micro, mainline) +-- u-boot.bin +-- u-boot-sunxi-with-spl.bin `-- zImage @@ -98,5 +109,5 @@ Copy images on the SD card Finish ====== -Eject the SD card, insert it in the A20-OLinuXino-LIME board, and power it up. +Eject the SD card, insert it in the A20-OLinuXino board, and power it up. diff --git a/configs/olimex_a20_olinuxino_micro_defconfig b/configs/olimex_a20_olinuxino_micro_defconfig new file mode 100644 index 000000000000..23dd0f0fbc74 --- /dev/null +++ b/configs/olimex_a20_olinuxino_micro_defconfig @@ -0,0 +1,46 @@ +# Architecture +BR2_arm=y +BR2_cortex_a7=y +BR2_ARM_EABIHF=y +BR2_ARM_FPU_NEON_VFPV4=y + +# Lock to 4.0 headers to avoid breaking with newer kernels +BR2_KERNEL_HEADERS_VERSION=y +BR2_DEFAULT_KERNEL_VERSION="4.0.5" +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_0=y + +# System configuration +BR2_TARGET_GENERIC_HOSTNAME="a20-olinuxino" +BR2_TARGET_GENERIC_ISSUE="Welcome to OLinuXino!" +BR2_TARGET_GENERIC_GETTY=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/olimex/a20_olinuxino/post-build.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="board/olimex/a20_olinuxino/boot.cmd $(TARGET_DIR)/boot" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.0.5" +BR2_LINUX_KERNEL_USE_DEFCONFIG=y +BR2_LINUX_KERNEL_DEFCONFIG="sunxi" +BR2_LINUX_KERNEL_ZIMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun7i-a20-olinuxino-micro" +BR2_LINUX_KERNEL_INSTALL_TARGET=y + +# Filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +# BR2_TARGET_ROOTFS_TAR is not set + +# Bootloaders +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="A20-OLinuXino_MICRO" +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2015.04" +BR2_TARGET_UBOOT_FORMAT_BIN=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin" + +# Additional tools +BR2_PACKAGE_HOST_UBOOT_TOOLS=y
Add a defconfig for the Olimex A20-OLinuXino-Micro board, reusing most of the A20-OLinuXino-Lime files. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> --- board/olimex/a20_olinuxino/readme.txt | 31 +++++++++++++------ configs/olimex_a20_olinuxino_micro_defconfig | 46 ++++++++++++++++++++++++++++ 2 files changed, 67 insertions(+), 10 deletions(-) create mode 100644 configs/olimex_a20_olinuxino_micro_defconfig