diff mbox

[06/17] phy: omap-usb2: use *syscon* framework to power on/off the PHY

Message ID 1435060743-5511-7-git-send-email-kishon@ti.com
State Needs Review / ACK, archived
Headers show

Checks

Context Check Description
robh/checkpatch warning total: 1 errors, 0 warnings, 0 lines checked
robh/patch-applied success

Commit Message

Kishon Vijay Abraham I June 23, 2015, 11:58 a.m. UTC
Deprecate using phy-omap-control driver to power on/off the PHY,
and use *syscon* framework to do the same. This handles
powering on/off the PHY for the USB2 PHYs used in various TI SoCs.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/phy/ti-phy.txt |    6 +-
 drivers/phy/phy-omap-usb2.c                      |  101 ++++++++++++++++++----
 include/linux/phy/omap_usb.h                     |   18 ++++
 3 files changed, 107 insertions(+), 18 deletions(-)

Comments

Roger Quadros June 24, 2015, 11:33 a.m. UTC | #1
On Tue, 23 Jun 2015 17:28:51 +0530
Kishon Vijay Abraham I <kishon@ti.com> wrote:

> Deprecate using phy-omap-control driver to power on/off the PHY,
> and use *syscon* framework to do the same. This handles
> powering on/off the PHY for the USB2 PHYs used in various TI SoCs.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  Documentation/devicetree/bindings/phy/ti-phy.txt |    6 +-
>  drivers/phy/phy-omap-usb2.c                      |  101 ++++++++++++++++++----
>  include/linux/phy/omap_usb.h                     |   18 ++++
>  3 files changed, 107 insertions(+), 18 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
> index b9101b9..5bfe461 100644
> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
> @@ -42,10 +42,14 @@ Required properties:
>     * "wkupclk" - wakeup clock.
>     * "refclk" - reference clock (optional).
>  
> -Optional properties:
> +Deprecated properties:
>   - ctrl-module : phandle of the control module used by PHY driver to power on
>     the PHY.
>  
> +Recommended properies:
> +- syscon-phy-power : phandle/offset pair. Phandle to the system control
> +  module and the register offset to power on/off the PHY.
> +
>  This is usually a subnode of ocp2scp to which it is connected.
>  
>  usb2phy@4a0ad080 {
> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
> index 2f7220f..180b066 100644
> --- a/drivers/phy/phy-omap-usb2.c
> +++ b/drivers/phy/phy-omap-usb2.c
> @@ -29,6 +29,8 @@
>  #include <linux/delay.h>
>  #include <linux/phy/omap_control_phy.h>
>  #include <linux/phy/phy.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
>  #include <linux/of_platform.h>
>  
>  #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
> @@ -97,22 +99,65 @@ static int omap_usb_set_peripheral(struct usb_otg *otg,
>  	return 0;
>  }
>  
> -static int omap_usb_power_off(struct phy *x)
> +static int omap_usb_phy_power(struct omap_usb *phy, int on)
>  {
> -	struct omap_usb *phy = phy_get_drvdata(x);
> +	u32 val = 0;
> +	u32 mask;
> +	int ret;
>  
> -	omap_control_phy_power(phy->control_dev, 0);
> +	if (phy->syscon_phy_power) {
> +		switch (phy->type) {
> +		case TYPE_USB2:
> +			mask = OMAP_DEV_PHY_PD;
> +			if (!on)
> +				val = OMAP_DEV_PHY_PD;
> +			break;
> +		case TYPE_DRA7USB2:
> +			mask = OMAP_USB2_PHY_PD;
> +			if (!on)
> +				val = OMAP_USB2_PHY_PD;
> +			break;
> +		case TYPE_AM437USB2:
> +			mask = AM437X_USB2_PHY_PD |
> +				AM437X_USB2_OTG_PD |
> +				AM437X_USB2_OTGVDET_EN |
> +				AM437X_USB2_OTGSESSEND_EN;
> +			if (on) {
> +				val = AM437X_USB2_OTGVDET_EN |
> +					AM437X_USB2_OTGSESSEND_EN;
> +			} else {
> +				val = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD;
> +			}
> +			break;
> +		default:
> +			dev_err(phy->dev, "%s: type %d not recognized\n",
> +				__func__, phy->type);
> +			return -EINVAL;
> +		}
> +
> +		ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
> +					 mask, val);
> +		if (ret < 0)
> +			return ret;
> +	} else {
> +		omap_control_phy_power(phy->control_dev, on);
> +	}
>  
>  	return 0;
>  }
>  
> -static int omap_usb_power_on(struct phy *x)
> +static int omap_usb_power_off(struct phy *x)
>  {
>  	struct omap_usb *phy = phy_get_drvdata(x);
>  
> -	omap_control_phy_power(phy->control_dev, 1);
> +	return omap_usb_phy_power(phy, false);
> +}
>  
> -	return 0;
> +static int omap_usb_power_on(struct phy *x)
> +{
> +	struct omap_usb *phy = phy_get_drvdata(x);
> +
> +	return omap_usb_phy_power(phy, true);
>  }
>  
>  static int omap_usb_init(struct phy *x)
> @@ -147,26 +192,31 @@ static struct phy_ops ops = {
>  static const struct usb_phy_data omap_usb2_data = {
>  	.label = "omap_usb2",
>  	.flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
> +	.type = TYPE_USB2,
>  };
>  
>  static const struct usb_phy_data omap5_usb2_data = {
>  	.label = "omap5_usb2",
>  	.flags = 0,
> +	.type = TYPE_USB2,
>  };
>  
>  static const struct usb_phy_data dra7x_usb2_data = {
>  	.label = "dra7x_usb2",
>  	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
> +	.type = TYPE_USB2,
>  };
>  
>  static const struct usb_phy_data dra7x_usb2_phy2_data = {
>  	.label = "dra7x_usb2_phy2",
>  	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
> +	.type = TYPE_DRA7USB2,
>  };
>  
>  static const struct usb_phy_data am437x_usb2_data = {
>  	.label = "am437x_usb2",
>  	.flags =  0,
> +	.type = TYPE_AM437USB2,
>  };
>  
>  static const struct of_device_id omap_usb2_id_table[] = {
> @@ -223,6 +273,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  
>  	phy->dev		= &pdev->dev;
> +	phy->type		= phy_data->type;
>  
>  	phy->phy.dev		= phy->dev;
>  	phy->phy.label		= phy_data->label;
> @@ -237,20 +288,36 @@ static int omap_usb2_probe(struct platform_device *pdev)
>  		phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT;
>  	}
>  
> -	control_node = of_parse_phandle(node, "ctrl-module", 0);
> -	if (!control_node) {
> -		dev_err(&pdev->dev, "Failed to get control device phandle\n");
> -		return -EINVAL;
> -	}
> +	phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
> +							"syscon-phy-power");
> +	if (IS_ERR(phy->syscon_phy_power)) {
> +		dev_info(&pdev->dev,
> +			 "can't get syscon-phy-power, using control device\n");
> +		phy->syscon_phy_power = NULL;
> +
> +		control_node = of_parse_phandle(node, "ctrl-module", 0);
> +		if (!control_node) {
> +			dev_err(&pdev->dev,
> +				"Failed to get control device phandle\n");
> +			return -EINVAL;
> +		}
>  
> -	control_pdev = of_find_device_by_node(control_node);
> -	if (!control_pdev) {
> -		dev_err(&pdev->dev, "Failed to get control device\n");
> -		return -EINVAL;
> +		control_pdev = of_find_device_by_node(control_node);
> +		if (!control_pdev) {
> +			dev_err(&pdev->dev, "Failed to get control device\n");
> +			return -EINVAL;
> +		}
> +		phy->control_dev = &control_pdev->dev;
> +	} else {
> +		if (of_property_read_u32_index(node,
> +					       "syscon-phy-power", 1,
> +					       &phy->power_reg)) {
> +			dev_err(&pdev->dev,
> +				"couldn't get power reg. offset\n");
> +			return -EINVAL;
> +		}
>  	}
>  
> -	phy->control_dev = &control_pdev->dev;
> -
>  	otg->set_host		= omap_usb_set_host;
>  	otg->set_peripheral	= omap_usb_set_peripheral;
>  	if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
> diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
> index dc2c541..de933ab 100644
> --- a/include/linux/phy/omap_usb.h
> +++ b/include/linux/phy/omap_usb.h
> @@ -30,6 +30,12 @@ struct usb_dpll_params {
>  	u32	mf;
>  };
>  
> +enum omap_usb_phy_type {
> +	TYPE_USB2,    /* USB2_PHY, power down in CONTROL_DEV_CONF */
> +	TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
> +	TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
> +};
> +
>  struct omap_usb {
>  	struct usb_phy		phy;
>  	struct phy_companion	*comparator;
> @@ -40,11 +46,15 @@ struct omap_usb {
>  	struct clk		*wkupclk;
>  	struct clk		*optclk;
>  	u8			flags;
> +	enum omap_usb_phy_type	type;
> +	struct regmap		*syscon_phy_power; /* ctrl. reg. acces */
> +	unsigned int		power_reg; /* power reg. index within syscon */
>  };
>  
>  struct usb_phy_data {
>  	const char *label;
>  	u8 flags;
> +	enum omap_usb_phy_type type;
>  };
>  
>  /* Driver Flags */
> @@ -52,6 +62,14 @@ struct usb_phy_data {
>  #define OMAP_USB2_HAS_SET_VBUS (1 << 1)
>  #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2)
>  
> +#define OMAP_DEV_PHY_PD		BIT(0)
> +#define OMAP_USB2_PHY_PD	BIT(28)
> +
> +#define AM437X_USB2_PHY_PD		BIT(0)

This PD bit can be set in usb_phy_data and used by
a single block of code for all 3 phys.

> +#define AM437X_USB2_OTG_PD		BIT(1)
> +#define AM437X_USB2_OTGVDET_EN		BIT(19)
> +#define AM437X_USB2_OTGSESSEND_EN	BIT(20)
> +
>  #define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
>  
>  #if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)
> -- 
> 1.7.9.5
> 

cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kishon Vijay Abraham I June 24, 2015, 12:59 p.m. UTC | #2
Hi,

On Wednesday 24 June 2015 05:03 PM, Roger Quadros wrote:
> On Tue, 23 Jun 2015 17:28:51 +0530
> Kishon Vijay Abraham I <kishon@ti.com> wrote:
> 
>> Deprecate using phy-omap-control driver to power on/off the PHY,
>> and use *syscon* framework to do the same. This handles
>> powering on/off the PHY for the USB2 PHYs used in various TI SoCs.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  Documentation/devicetree/bindings/phy/ti-phy.txt |    6 +-
>>  drivers/phy/phy-omap-usb2.c                      |  101 ++++++++++++++++++----
>>  include/linux/phy/omap_usb.h                     |   18 ++++
>>  3 files changed, 107 insertions(+), 18 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
>> index b9101b9..5bfe461 100644
>> --- a/Documentation/devicetree/bindings/phy/ti-phy.txt
>> +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
>> @@ -42,10 +42,14 @@ Required properties:
>>     * "wkupclk" - wakeup clock.
>>     * "refclk" - reference clock (optional).
>>  
>> -Optional properties:
>> +Deprecated properties:
>>   - ctrl-module : phandle of the control module used by PHY driver to power on
>>     the PHY.
>>  
>> +Recommended properies:
>> +- syscon-phy-power : phandle/offset pair. Phandle to the system control
>> +  module and the register offset to power on/off the PHY.
>> +
>>  This is usually a subnode of ocp2scp to which it is connected.
>>  
>>  usb2phy@4a0ad080 {
>> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
>> index 2f7220f..180b066 100644
>> --- a/drivers/phy/phy-omap-usb2.c
>> +++ b/drivers/phy/phy-omap-usb2.c
>> @@ -29,6 +29,8 @@
>>  #include <linux/delay.h>
>>  #include <linux/phy/omap_control_phy.h>
>>  #include <linux/phy/phy.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/regmap.h>
>>  #include <linux/of_platform.h>
>>  
>>  #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
>> @@ -97,22 +99,65 @@ static int omap_usb_set_peripheral(struct usb_otg *otg,
>>  	return 0;
>>  }
>>  
>> -static int omap_usb_power_off(struct phy *x)
>> +static int omap_usb_phy_power(struct omap_usb *phy, int on)
>>  {
>> -	struct omap_usb *phy = phy_get_drvdata(x);
>> +	u32 val = 0;
>> +	u32 mask;
>> +	int ret;
>>  
>> -	omap_control_phy_power(phy->control_dev, 0);
>> +	if (phy->syscon_phy_power) {
>> +		switch (phy->type) {
>> +		case TYPE_USB2:
>> +			mask = OMAP_DEV_PHY_PD;
>> +			if (!on)
>> +				val = OMAP_DEV_PHY_PD;
>> +			break;
>> +		case TYPE_DRA7USB2:
>> +			mask = OMAP_USB2_PHY_PD;
>> +			if (!on)
>> +				val = OMAP_USB2_PHY_PD;
>> +			break;
>> +		case TYPE_AM437USB2:
>> +			mask = AM437X_USB2_PHY_PD |
>> +				AM437X_USB2_OTG_PD |
>> +				AM437X_USB2_OTGVDET_EN |
>> +				AM437X_USB2_OTGSESSEND_EN;
>> +			if (on) {
>> +				val = AM437X_USB2_OTGVDET_EN |
>> +					AM437X_USB2_OTGSESSEND_EN;
>> +			} else {
>> +				val = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD;
>> +			}
>> +			break;
>> +		default:
>> +			dev_err(phy->dev, "%s: type %d not recognized\n",
>> +				__func__, phy->type);
>> +			return -EINVAL;
>> +		}
>> +
>> +		ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
>> +					 mask, val);
>> +		if (ret < 0)
>> +			return ret;
>> +	} else {
>> +		omap_control_phy_power(phy->control_dev, on);
>> +	}
>>  
>>  	return 0;
>>  }
>>  
>> -static int omap_usb_power_on(struct phy *x)
>> +static int omap_usb_power_off(struct phy *x)
>>  {
>>  	struct omap_usb *phy = phy_get_drvdata(x);
>>  
>> -	omap_control_phy_power(phy->control_dev, 1);
>> +	return omap_usb_phy_power(phy, false);
>> +}
>>  
>> -	return 0;
>> +static int omap_usb_power_on(struct phy *x)
>> +{
>> +	struct omap_usb *phy = phy_get_drvdata(x);
>> +
>> +	return omap_usb_phy_power(phy, true);
>>  }
>>  
>>  static int omap_usb_init(struct phy *x)
>> @@ -147,26 +192,31 @@ static struct phy_ops ops = {
>>  static const struct usb_phy_data omap_usb2_data = {
>>  	.label = "omap_usb2",
>>  	.flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
>> +	.type = TYPE_USB2,
>>  };
>>  
>>  static const struct usb_phy_data omap5_usb2_data = {
>>  	.label = "omap5_usb2",
>>  	.flags = 0,
>> +	.type = TYPE_USB2,
>>  };
>>  
>>  static const struct usb_phy_data dra7x_usb2_data = {
>>  	.label = "dra7x_usb2",
>>  	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
>> +	.type = TYPE_USB2,
>>  };
>>  
>>  static const struct usb_phy_data dra7x_usb2_phy2_data = {
>>  	.label = "dra7x_usb2_phy2",
>>  	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
>> +	.type = TYPE_DRA7USB2,
>>  };
>>  
>>  static const struct usb_phy_data am437x_usb2_data = {
>>  	.label = "am437x_usb2",
>>  	.flags =  0,
>> +	.type = TYPE_AM437USB2,
>>  };
>>  
>>  static const struct of_device_id omap_usb2_id_table[] = {
>> @@ -223,6 +273,7 @@ static int omap_usb2_probe(struct platform_device *pdev)
>>  		return -ENOMEM;
>>  
>>  	phy->dev		= &pdev->dev;
>> +	phy->type		= phy_data->type;
>>  
>>  	phy->phy.dev		= phy->dev;
>>  	phy->phy.label		= phy_data->label;
>> @@ -237,20 +288,36 @@ static int omap_usb2_probe(struct platform_device *pdev)
>>  		phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT;
>>  	}
>>  
>> -	control_node = of_parse_phandle(node, "ctrl-module", 0);
>> -	if (!control_node) {
>> -		dev_err(&pdev->dev, "Failed to get control device phandle\n");
>> -		return -EINVAL;
>> -	}
>> +	phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
>> +							"syscon-phy-power");
>> +	if (IS_ERR(phy->syscon_phy_power)) {
>> +		dev_info(&pdev->dev,
>> +			 "can't get syscon-phy-power, using control device\n");
>> +		phy->syscon_phy_power = NULL;
>> +
>> +		control_node = of_parse_phandle(node, "ctrl-module", 0);
>> +		if (!control_node) {
>> +			dev_err(&pdev->dev,
>> +				"Failed to get control device phandle\n");
>> +			return -EINVAL;
>> +		}
>>  
>> -	control_pdev = of_find_device_by_node(control_node);
>> -	if (!control_pdev) {
>> -		dev_err(&pdev->dev, "Failed to get control device\n");
>> -		return -EINVAL;
>> +		control_pdev = of_find_device_by_node(control_node);
>> +		if (!control_pdev) {
>> +			dev_err(&pdev->dev, "Failed to get control device\n");
>> +			return -EINVAL;
>> +		}
>> +		phy->control_dev = &control_pdev->dev;
>> +	} else {
>> +		if (of_property_read_u32_index(node,
>> +					       "syscon-phy-power", 1,
>> +					       &phy->power_reg)) {
>> +			dev_err(&pdev->dev,
>> +				"couldn't get power reg. offset\n");
>> +			return -EINVAL;
>> +		}
>>  	}
>>  
>> -	phy->control_dev = &control_pdev->dev;
>> -
>>  	otg->set_host		= omap_usb_set_host;
>>  	otg->set_peripheral	= omap_usb_set_peripheral;
>>  	if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
>> diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
>> index dc2c541..de933ab 100644
>> --- a/include/linux/phy/omap_usb.h
>> +++ b/include/linux/phy/omap_usb.h
>> @@ -30,6 +30,12 @@ struct usb_dpll_params {
>>  	u32	mf;
>>  };
>>  
>> +enum omap_usb_phy_type {
>> +	TYPE_USB2,    /* USB2_PHY, power down in CONTROL_DEV_CONF */
>> +	TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
>> +	TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
>> +};
>> +
>>  struct omap_usb {
>>  	struct usb_phy		phy;
>>  	struct phy_companion	*comparator;
>> @@ -40,11 +46,15 @@ struct omap_usb {
>>  	struct clk		*wkupclk;
>>  	struct clk		*optclk;
>>  	u8			flags;
>> +	enum omap_usb_phy_type	type;
>> +	struct regmap		*syscon_phy_power; /* ctrl. reg. acces */
>> +	unsigned int		power_reg; /* power reg. index within syscon */
>>  };
>>  
>>  struct usb_phy_data {
>>  	const char *label;
>>  	u8 flags;
>> +	enum omap_usb_phy_type type;
>>  };
>>  
>>  /* Driver Flags */
>> @@ -52,6 +62,14 @@ struct usb_phy_data {
>>  #define OMAP_USB2_HAS_SET_VBUS (1 << 1)
>>  #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2)
>>  
>> +#define OMAP_DEV_PHY_PD		BIT(0)
>> +#define OMAP_USB2_PHY_PD	BIT(28)
>> +
>> +#define AM437X_USB2_PHY_PD		BIT(0)
> 
> This PD bit can be set in usb_phy_data and used by
> a single block of code for all 3 phys.

yeah, that could be done.

Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index b9101b9..5bfe461 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -42,10 +42,14 @@  Required properties:
    * "wkupclk" - wakeup clock.
    * "refclk" - reference clock (optional).
 
-Optional properties:
+Deprecated properties:
  - ctrl-module : phandle of the control module used by PHY driver to power on
    the PHY.
 
+Recommended properies:
+- syscon-phy-power : phandle/offset pair. Phandle to the system control
+  module and the register offset to power on/off the PHY.
+
 This is usually a subnode of ocp2scp to which it is connected.
 
 usb2phy@4a0ad080 {
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 2f7220f..180b066 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -29,6 +29,8 @@ 
 #include <linux/delay.h>
 #include <linux/phy/omap_control_phy.h>
 #include <linux/phy/phy.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 #include <linux/of_platform.h>
 
 #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
@@ -97,22 +99,65 @@  static int omap_usb_set_peripheral(struct usb_otg *otg,
 	return 0;
 }
 
-static int omap_usb_power_off(struct phy *x)
+static int omap_usb_phy_power(struct omap_usb *phy, int on)
 {
-	struct omap_usb *phy = phy_get_drvdata(x);
+	u32 val = 0;
+	u32 mask;
+	int ret;
 
-	omap_control_phy_power(phy->control_dev, 0);
+	if (phy->syscon_phy_power) {
+		switch (phy->type) {
+		case TYPE_USB2:
+			mask = OMAP_DEV_PHY_PD;
+			if (!on)
+				val = OMAP_DEV_PHY_PD;
+			break;
+		case TYPE_DRA7USB2:
+			mask = OMAP_USB2_PHY_PD;
+			if (!on)
+				val = OMAP_USB2_PHY_PD;
+			break;
+		case TYPE_AM437USB2:
+			mask = AM437X_USB2_PHY_PD |
+				AM437X_USB2_OTG_PD |
+				AM437X_USB2_OTGVDET_EN |
+				AM437X_USB2_OTGSESSEND_EN;
+			if (on) {
+				val = AM437X_USB2_OTGVDET_EN |
+					AM437X_USB2_OTGSESSEND_EN;
+			} else {
+				val = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD;
+			}
+			break;
+		default:
+			dev_err(phy->dev, "%s: type %d not recognized\n",
+				__func__, phy->type);
+			return -EINVAL;
+		}
+
+		ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
+					 mask, val);
+		if (ret < 0)
+			return ret;
+	} else {
+		omap_control_phy_power(phy->control_dev, on);
+	}
 
 	return 0;
 }
 
-static int omap_usb_power_on(struct phy *x)
+static int omap_usb_power_off(struct phy *x)
 {
 	struct omap_usb *phy = phy_get_drvdata(x);
 
-	omap_control_phy_power(phy->control_dev, 1);
+	return omap_usb_phy_power(phy, false);
+}
 
-	return 0;
+static int omap_usb_power_on(struct phy *x)
+{
+	struct omap_usb *phy = phy_get_drvdata(x);
+
+	return omap_usb_phy_power(phy, true);
 }
 
 static int omap_usb_init(struct phy *x)
@@ -147,26 +192,31 @@  static struct phy_ops ops = {
 static const struct usb_phy_data omap_usb2_data = {
 	.label = "omap_usb2",
 	.flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
+	.type = TYPE_USB2,
 };
 
 static const struct usb_phy_data omap5_usb2_data = {
 	.label = "omap5_usb2",
 	.flags = 0,
+	.type = TYPE_USB2,
 };
 
 static const struct usb_phy_data dra7x_usb2_data = {
 	.label = "dra7x_usb2",
 	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+	.type = TYPE_USB2,
 };
 
 static const struct usb_phy_data dra7x_usb2_phy2_data = {
 	.label = "dra7x_usb2_phy2",
 	.flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+	.type = TYPE_DRA7USB2,
 };
 
 static const struct usb_phy_data am437x_usb2_data = {
 	.label = "am437x_usb2",
 	.flags =  0,
+	.type = TYPE_AM437USB2,
 };
 
 static const struct of_device_id omap_usb2_id_table[] = {
@@ -223,6 +273,7 @@  static int omap_usb2_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	phy->dev		= &pdev->dev;
+	phy->type		= phy_data->type;
 
 	phy->phy.dev		= phy->dev;
 	phy->phy.label		= phy_data->label;
@@ -237,20 +288,36 @@  static int omap_usb2_probe(struct platform_device *pdev)
 		phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT;
 	}
 
-	control_node = of_parse_phandle(node, "ctrl-module", 0);
-	if (!control_node) {
-		dev_err(&pdev->dev, "Failed to get control device phandle\n");
-		return -EINVAL;
-	}
+	phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
+							"syscon-phy-power");
+	if (IS_ERR(phy->syscon_phy_power)) {
+		dev_info(&pdev->dev,
+			 "can't get syscon-phy-power, using control device\n");
+		phy->syscon_phy_power = NULL;
+
+		control_node = of_parse_phandle(node, "ctrl-module", 0);
+		if (!control_node) {
+			dev_err(&pdev->dev,
+				"Failed to get control device phandle\n");
+			return -EINVAL;
+		}
 
-	control_pdev = of_find_device_by_node(control_node);
-	if (!control_pdev) {
-		dev_err(&pdev->dev, "Failed to get control device\n");
-		return -EINVAL;
+		control_pdev = of_find_device_by_node(control_node);
+		if (!control_pdev) {
+			dev_err(&pdev->dev, "Failed to get control device\n");
+			return -EINVAL;
+		}
+		phy->control_dev = &control_pdev->dev;
+	} else {
+		if (of_property_read_u32_index(node,
+					       "syscon-phy-power", 1,
+					       &phy->power_reg)) {
+			dev_err(&pdev->dev,
+				"couldn't get power reg. offset\n");
+			return -EINVAL;
+		}
 	}
 
-	phy->control_dev = &control_pdev->dev;
-
 	otg->set_host		= omap_usb_set_host;
 	otg->set_peripheral	= omap_usb_set_peripheral;
 	if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
index dc2c541..de933ab 100644
--- a/include/linux/phy/omap_usb.h
+++ b/include/linux/phy/omap_usb.h
@@ -30,6 +30,12 @@  struct usb_dpll_params {
 	u32	mf;
 };
 
+enum omap_usb_phy_type {
+	TYPE_USB2,    /* USB2_PHY, power down in CONTROL_DEV_CONF */
+	TYPE_DRA7USB2, /* USB2 PHY, power and power_aux e.g. DRA7 */
+	TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */
+};
+
 struct omap_usb {
 	struct usb_phy		phy;
 	struct phy_companion	*comparator;
@@ -40,11 +46,15 @@  struct omap_usb {
 	struct clk		*wkupclk;
 	struct clk		*optclk;
 	u8			flags;
+	enum omap_usb_phy_type	type;
+	struct regmap		*syscon_phy_power; /* ctrl. reg. acces */
+	unsigned int		power_reg; /* power reg. index within syscon */
 };
 
 struct usb_phy_data {
 	const char *label;
 	u8 flags;
+	enum omap_usb_phy_type type;
 };
 
 /* Driver Flags */
@@ -52,6 +62,14 @@  struct usb_phy_data {
 #define OMAP_USB2_HAS_SET_VBUS (1 << 1)
 #define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2)
 
+#define OMAP_DEV_PHY_PD		BIT(0)
+#define OMAP_USB2_PHY_PD	BIT(28)
+
+#define AM437X_USB2_PHY_PD		BIT(0)
+#define AM437X_USB2_OTG_PD		BIT(1)
+#define AM437X_USB2_OTGVDET_EN		BIT(19)
+#define AM437X_USB2_OTGSESSEND_EN	BIT(20)
+
 #define	phy_to_omapusb(x)	container_of((x), struct omap_usb, phy)
 
 #if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE)