@@ -409,6 +409,8 @@ static void via_write_devctl(ide_hwif_t *hwif, u8 ctl)
outb(ctl, hwif->io_ports.ctl_addr);
outb(vdev->cached_device[hwif->channel], hwif->io_ports.device_addr);
+ printk("via_write_devctl write %u, %lu\n",
+ vdev->cached_device[hwif->channel], hwif->io_ports.device_addr);
}
static void __via_dev_select(ide_drive_t *drive, u8 select)
@@ -442,6 +444,9 @@ static void via_tf_load(ide_drive_t *drive, struct
ide_taskfile *tf, u8 valid)
outb(tf->lbah, io_ports->lbah_addr);
if (valid & IDE_VALID_DEVICE)
__via_dev_select(drive, tf->device);
+ printk("via_tf_load write tf->device %u in place of tf->device %u\n"
+ " value io_ports->device_addr %lu\n",
+ tf->device, tf->device, io_ports->device_addr);
}
const struct ide_tp_ops via_tp_ops = {
--
1.7.0
Uniform Multi-Platform E-IDE driver
via82cxxx 0000:00:07.1: VIA vt82c586b (rev 41) IDE UDMA33
via82cxxx 0000:00:07.1: IDE controller (0x1106:0x0571 rev 0x06)
via82cxxx 0000:00:07.1: not 100% native mode: will probe irqs later
ide: disallowing DMA for hda
ide: disallowing DMA for hdb
ide0: BM-DMA at 0xe400-0xe407
ide: disallowing DMA for hdc
ide: disallowing DMA for hdd
ide1: BM-DMA at 0xe408-0xe40f
via_write_devctl write 160, 502
via_write_devctl write 176, 502
via_write_devctl write 160, 502
hda: Maxtor 6Y120P0, ATA DISK drive
via_write_devctl write 176, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_write_devctl write 176, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_write_devctl write 160, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_write_devctl write 160, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
ide1: no devices on the port
via_write_devctl write 160, 502
via_write_devctl write 0, 374
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all
legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 128KiB
via_write_devctl write 160, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_tf_load write tf->device 175 in place of tf->device 175
value io_ports->device_addr 502
via_write_devctl write 160, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_tf_load write tf->device 160 in place of tf->device 160
value io_ports->device_addr 502
via_write_devctl write 160, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_tf_load write tf->device 160 in place of tf->device 160
value io_ports->device_addr 502
via_write_devctl write 160, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_tf_load write tf->device 224 in place of tf->device 224
value io_ports->device_addr 502
via_write_devctl write 224, 502
hda: 66055248 sectors (33820 MB) w/7936KiB Cache, CHS=65531/16/63
via_write_devctl write 160, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_tf_load write tf->device 160 in place of tf->device 160
value io_ports->device_addr 502
via_write_devctl write 160, 502
hda: cache flushes supported
hda:via_write_devctl write 160, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_tf_load write tf->device 224 in place of tf->device 224
value io_ports->device_addr 502
hda1 hda2 hda3
hda: p3 size 236037312 exceeds device capacity, enabling native capacity
via_write_devctl write 160, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_tf_load write tf->device 224 in place of tf->device 224
value io_ports->device_addr 502
via_write_devctl write 224, 502
via_write_devctl write 160, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_tf_load write tf->device 227 in place of tf->device 227
value io_ports->device_addr 502
via_write_devctl write 227, 502
hda: p3 size 236037312 exceeds device capacity, limited to end of disk
via_write_devctl write 160, 502
via_tf_load write tf->device 0 in place of tf->device 0
value io_ports->device_addr 502
via_tf_load write tf->device 160 in place of tf->device 160
value io_ports->device_addr 502
via_write_devctl write 160, 502
ide-cd driver 5.00
VFS: Cannot open root device "1602" or unknown-block(22,2)
Please append a correct "root=" boot option; here are the available partitions:
0300 33027624 hda driver: ide-gd
0301 49391 hda1
0302 1992816 hda2
0303 30985416 hda3
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(22,2)
>From 72da5cd66e1f857fbe6afa0e92634e8adf684737 Mon Sep 17 00:00:00 2001
From: David Fries <david@fries.net>
Date: Thu, 25 Mar 2010 20:07:19 -0500
Subject: [PATCH 2/2] via82cxxx works: skip write
This fixes via82cxxx host protected area problems.
---
drivers/ide/via82cxxx.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
@@ -408,8 +408,10 @@ static void via_write_devctl(ide_hwif_t *hwif, u8 ctl)
struct via82cxxx_dev *vdev = hwif->host->host_priv;
outb(ctl, hwif->io_ports.ctl_addr);
+ /*
outb(vdev->cached_device[hwif->channel], hwif->io_ports.device_addr);
- printk("via_write_devctl write %u, %lu\n",
+ */
+ printk("via_write_devctl skip write %u, %lu\n",
vdev->cached_device[hwif->channel], hwif->io_ports.device_addr);
}
https://bugzilla.kernel.org/show_bug.cgi?id=15639 Summary: 2.6.34-rc1 breaks via82cxxx Host Protected Area Product: IO/Storage Version: 2.5 Kernel Version: 2.6.34-rc2 Platform: All OS/Version: Linux Tree: Mainline Status: NEW Severity: high Priority: P1 Component: IDE AssignedTo: io_ide@kernel-bugs.osdl.org ReportedBy: David@Fries.net Regression: Yes The kernel fails to see the entire disk with 2.6.34-rc2 with VIA vt82c586b chipset. I tracked it down to commit f931a5d5785d7b7c44871bd7ad2762e29dfddf29 "via82cxxx: workaround h/w bugs" and reverting just that one solves the problem, or just commenting out just one outb write in that change. via82cxxx 0000:00:07.1: VIA vt82c586b (rev 41) IDE UDMA33 via82cxxx 0000:00:07.1: IDE controller (0x1106:0x0571 rev 0x06) via82cxxx 0000:00:07.1: not 100% native mode: will probe irqs later Note the kernel panic is intentional as I'm given the test kernel an invalid root device, so that I can suspend to disk, try a kernel, resume and pick up where I left off. It does have a side benefit of dumping the size of all partitions. 2.6.34-rc2 unmodified, fails and sees 30985416 KiB for the last partition. ide-gd driver 1.18 hda: max request size: 128KiB hda: 66055248 sectors (33820 MB) w/7936KiB Cache, CHS=65531/16/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda: p3 size 236037312 exceeds device capacity, enabling native capacity hda: p3 size 236037312 exceeds device capacity, limited to end of disk ide-cd driver 5.00 ... Please append a correct "root=" boot option; here are the available partitions: 0300 33027624 hda driver: ide-gd 0301 49391 hda1 0302 1992816 hda2 0303 30985416 hda3 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(22,2) 2.6.34-rc2 with patch revered, correct size 118018656 ide-gd driver 1.18 hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 66055248 sectors (33820 MB) native capacity is 240121728 sectors (122942 MB) hda: 66055248 sectors (33820 MB) w/7936KiB Cache, CHS=65531/16/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda: p3 size 236037312 exceeds device capacity, enabling native capacity hda: detected capacity change from 33820286976 to 122942324736 ide-cd driver 5.00 0300 120060864 hda driver: ide-gd 0301 49391 hda1 0302 1992816 hda2 0303 118018656 hda3 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(22,2) Here are two debug patches, the first adds debug prints and the second disables the problematic write, I have the output of both included. >From dac7d14ce1f227d8a084c3ec218ea1430bffdc57 Mon Sep 17 00:00:00 2001 From: David Fries <david@fries.net> Date: Thu, 25 Mar 2010 19:51:31 -0500 Subject: [PATCH 1/2] fails: add print messages add print messages for debugging --- drivers/ide/via82cxxx.c | 5 +++++ 1 files changed, 5 insertions(+), 0 deletions(-)