@@ -118,7 +118,7 @@ DEF("numa", HAS_ARG, QEMU_OPTION_numa,
"-numa node[,memdev=id][,cpus=cpu[-cpu]][,nodeid=node]\n", QEMU_ARCH_ALL)
STEXI
@item -numa node[,mem=@var{size}][,cpus=@var{cpu[-cpu]}][,nodeid=@var{node}]
-@item -numa node[,memdev=@var{id}][,cpus=@var{cpu[-cpu]}][,nodeid=@var{node}]
+@itemx -numa node[,memdev=@var{id}][,cpus=@var{cpu[-cpu]}][,nodeid=@var{node}]
@findex -numa
Simulate a multi node NUMA system. If @samp{mem}, @samp{memdev}
and @samp{cpus} are omitted, resources are split equally. Also, note
@@ -421,7 +421,7 @@ DEF("fda", HAS_ARG, QEMU_OPTION_fda,
DEF("fdb", HAS_ARG, QEMU_OPTION_fdb, "", QEMU_ARCH_ALL)
STEXI
@item -fda @var{file}
-@item -fdb @var{file}
+@itemx -fdb @var{file}
@findex -fda
@findex -fdb
Use @var{file} as floppy disk 0/1 image (@pxref{disk_images}).
@@ -435,9 +435,9 @@ DEF("hdc", HAS_ARG, QEMU_OPTION_hdc,
DEF("hdd", HAS_ARG, QEMU_OPTION_hdd, "", QEMU_ARCH_ALL)
STEXI
@item -hda @var{file}
-@item -hdb @var{file}
-@item -hdc @var{file}
-@item -hdd @var{file}
+@itemx -hdb @var{file}
+@itemx -hdc @var{file}
+@itemx -hdd @var{file}
@findex -hda
@findex -hdb
@findex -hdc
@@ -1008,8 +1008,8 @@ Set the TCP port spice is listening on for plaintext channels.
Set the IP address spice is listening on. Default is any address.
@item ipv4
-@item ipv6
-@item unix
+@itemx ipv6
+@itemx unix
Force using the specified IP version.
@item password=<secret>
@@ -1044,17 +1044,17 @@ Set the TCP port spice is listening on for encrypted channels.
Set the x509 file directory. Expects same filenames as -vnc $display,x509=$dir
@item x509-key-file=<file>
-@item x509-key-password=<file>
-@item x509-cert-file=<file>
-@item x509-cacert-file=<file>
-@item x509-dh-key-file=<file>
+@itemx x509-key-password=<file>
+@itemx x509-cert-file=<file>
+@itemx x509-cacert-file=<file>
+@itemx x509-dh-key-file=<file>
The x509 file names can also be configured individually.
@item tls-ciphers=<list>
Specify which ciphers to use.
@item tls-channel=[main|display|cursor|inputs|record|playback]
-@item plaintext-channel=[main|display|cursor|inputs|record|playback]
+@itemx plaintext-channel=[main|display|cursor|inputs|record|playback]
Force specific channel to be used with or without TLS encryption. The
options can be specified multiple times to configure multiple
channels. The special name "default" can be used to set the default
@@ -1066,7 +1066,7 @@ Configure image compression (lossless).
Default is auto_glz.
@item jpeg-wan-compression=[auto|never|always]
-@item zlib-glz-wan-compression=[auto|never|always]
+@itemx zlib-glz-wan-compression=[auto|never|always]
Configure wan image compression (lossy for slow links).
Default is auto.
@@ -1602,7 +1602,7 @@ privilege to run. Valid options are:
Connect user mode stack to VLAN @var{n} (@var{n} = 0 is the default).
@item id=@var{id}
-@item name=@var{name}
+@itemx name=@var{name}
Assign symbolic name for use in monitor commands.
@item net=@var{addr}[/@var{mask}]
@@ -1709,7 +1709,7 @@ Then when you use on the host @code{telnet localhost 5555}, you
connect to the guest telnet server.
@item guestfwd=[tcp]:@var{server}:@var{port}-@var{dev}
-@item guestfwd=[tcp]:@var{server}:@var{port}-@var{cmd:command}
+@itemx guestfwd=[tcp]:@var{server}:@var{port}-@var{cmd:command}
Forward guest TCP connections to the IP address @var{server} on port @var{port}
to the character device @var{dev} or to a program executed by @var{cmd:command}
which gets spawned for each connection. This option can be given multiple times.
@@ -1740,7 +1740,7 @@ syntax gives undefined results. Their use for new applications is discouraged
as they will be removed from future versions.
@item -netdev tap,id=@var{id}[,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,helper=@var{helper}]
-@item -net tap[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,helper=@var{helper}]
+@itemx -net tap[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}][,helper=@var{helper}]
Connect the host TAP network interface @var{name} to VLAN @var{n}.
Use the network script @var{file} to configure it and the network script
@@ -1780,7 +1780,7 @@ qemu-system-i386 linux.img \
@end example
@item -netdev bridge,id=@var{id}[,br=@var{bridge}][,helper=@var{helper}]
-@item -net bridge[,vlan=@var{n}][,name=@var{name}][,br=@var{bridge}][,helper=@var{helper}]
+@itemx -net bridge[,vlan=@var{n}][,name=@var{name}][,br=@var{bridge}][,helper=@var{helper}]
Connect a host TAP network interface to a host bridge device.
Use the network helper @var{helper} to configure the TAP interface and
@@ -1803,7 +1803,7 @@ qemu-system-i386 linux.img -net bridge,br=qemubr0 -net nic,model=virtio
@end example
@item -netdev socket,id=@var{id}[,fd=@var{h}][,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}]
-@item -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}] [,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}]
+@itemx -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}] [,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}]
Connect the VLAN @var{n} to a remote VLAN in another QEMU virtual
machine using a TCP socket connection. If @option{listen} is
@@ -1826,7 +1826,7 @@ qemu-system-i386 linux.img \
@end example
@item -netdev socket,id=@var{id}[,fd=@var{h}][,mcast=@var{maddr}:@var{port}[,localaddr=@var{addr}]]
-@item -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,mcast=@var{maddr}:@var{port}[,localaddr=@var{addr}]]
+@itemx -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,mcast=@var{maddr}:@var{port}[,localaddr=@var{addr}]]
Create a VLAN @var{n} shared with another QEMU virtual
machines using a UDP multicast socket, effectively making a bus for
@@ -1878,7 +1878,7 @@ qemu-system-i386 linux.img \
@end example
@item -netdev l2tpv3,id=@var{id},src=@var{srcaddr},dst=@var{dstaddr}[,srcport=@var{srcport}][,dstport=@var{dstport}],txsession=@var{txsession}[,rxsession=@var{rxsession}][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=@var{txcookie}][,rxcookie=@var{rxcookie}][,offset=@var{offset}]
-@item -net l2tpv3[,vlan=@var{n}][,name=@var{name}],src=@var{srcaddr},dst=@var{dstaddr}[,srcport=@var{srcport}][,dstport=@var{dstport}],txsession=@var{txsession}[,rxsession=@var{rxsession}][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=@var{txcookie}][,rxcookie=@var{rxcookie}][,offset=@var{offset}]
+@itemx -net l2tpv3[,vlan=@var{n}][,name=@var{name}],src=@var{srcaddr},dst=@var{dstaddr}[,srcport=@var{srcport}][,dstport=@var{dstport}],txsession=@var{txsession}[,rxsession=@var{rxsession}][,ipv6][,udp][,cookie64][,counter][,pincounter][,txcookie=@var{txcookie}][,rxcookie=@var{rxcookie}][,offset=@var{offset}]
Connect VLAN @var{n} to L2TPv3 pseudowire. L2TPv3 (RFC3391) is a popular
protocol to transport Ethernet (and other Layer 2) data frames between
two systems. It is present in routers, firewalls and the Linux kernel
@@ -1899,7 +1899,7 @@ This transport allows a VM to communicate to another VM, router or firewall dire
@item ipv6
force v6, otherwise defaults to v4.
@item rxcookie=@var{rxcookie}
-@item txcookie=@var{txcookie}
+@itemx txcookie=@var{txcookie}
Cookies are a weak form of security in the l2tpv3 specification.
Their function is mostly to prevent misconfiguration. By default they are 32
bit.
@@ -1937,7 +1937,7 @@ qemu-system-i386 linux.img -net nic -net l2tpv3,src=4.2.3.1,dst=1.2.3.4,udp,srcp
@end example
@item -netdev vde,id=@var{id}[,sock=@var{socketpath}][,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}]
-@item -net vde[,vlan=@var{n}][,name=@var{name}][,sock=@var{socketpath}] [,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}]
+@itemx -net vde[,vlan=@var{n}][,name=@var{name}][,sock=@var{socketpath}] [,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}]
Connect VLAN @var{n} to PORT @var{n} of a vde switch running on host and
listening for incoming connections on @var{socketpath}. Use GROUP @var{groupname}
and MODE @var{octalmode} to change default ownership and permissions for
@@ -2236,7 +2236,7 @@ DragonFlyBSD hosts. It is an alias for @option{serial}.
@option{path} specifies the path to the tty. @option{path} is required.
@item -chardev parallel ,id=@var{id} ,path=@var{path}
-@item -chardev parport ,id=@var{id} ,path=@var{path}
+@itemx -chardev parport ,id=@var{id} ,path=@var{path}
@option{parallel} is only available on Linux, FreeBSD and DragonFlyBSD hosts.
@@ -3201,7 +3201,7 @@ Examples:
@table @code
@item -watchdog i6300esb -watchdog-action pause
-@item -watchdog ib700
+@itemx -watchdog ib700
@end table
ETEXI
@@ -3221,7 +3221,7 @@ instance you could use the either of the following to change the escape
character to Control-t.
@table @code
@item -echr 0x14
-@item -echr 20
+@itemx -echr 20
@end table
ETEXI
@@ -3269,7 +3269,7 @@ DEF("incoming", HAS_ARG, QEMU_OPTION_incoming, \
QEMU_ARCH_ALL)
STEXI
@item -incoming tcp:[@var{host}]:@var{port}[,to=@var{maxport}][,ipv4][,ipv6]
-@item -incoming rdma:@var{host}:@var{port}[,ipv4][,ipv6]
+@itemx -incoming rdma:@var{host}:@var{port}[,ipv4][,ipv6]
@findex -incoming
Prepare for incoming migration, listen on a given tcp port.
Doesn't appear to make a difference, but let's use it consistently. Signed-off-by: Markus Armbruster <armbru@redhat.com> --- qemu-options.hx | 52 ++++++++++++++++++++++++++-------------------------- 1 file changed, 26 insertions(+), 26 deletions(-)