[v6,08/15] drm/exynos: dsi: rename pll_clk to sclk_clk

This patch renames pll_clk to sclk_clk. The clock referenced by pll_clk
is actually not the pll input clock for dsi. The pll input clock comes
from the board's oscillator directly. But for the backward
compatibility, the old clock name "pll_clk" is also OK.

Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
---
Changes before:
- Refer https://patchwork.kernel.org/patch/6191721
Changes for v6:
- Merged 2 patches
   drm/exynos: dsi: add the backward compatibility for the renamed clock
   drm/exynos: dsi: rename pll_clk to sclk_clk

 .../devicetree/bindings/video/exynos_dsim.txt      |  7 +++--
 drivers/gpu/drm/exynos/exynos_drm_dsi.c            | 36 ++++++++++------------
 2 files changed, 20 insertions(+), 23 deletions(-)

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

+ Samsung SoC mailing list.

On 2015년 06월 12일 21:59, Hyungwon Hwang wrote:
> This patch renames pll_clk to sclk_clk. The clock referenced by pll_clk
> is actually not the pll input clock for dsi. The pll input clock comes
> from the board's oscillator directly. But for the backward
> compatibility, the old clock name "pll_clk" is also OK.
> 
> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
> ---
> Changes before:
> - Refer https://patchwork.kernel.org/patch/6191721
> Changes for v6:
> - Merged 2 patches
>    drm/exynos: dsi: add the backward compatibility for the renamed clock
>    drm/exynos: dsi: rename pll_clk to sclk_clk
> 
>  .../devicetree/bindings/video/exynos_dsim.txt      |  7 +++--
>  drivers/gpu/drm/exynos/exynos_drm_dsi.c            | 36 ++++++++++------------
>  2 files changed, 20 insertions(+), 23 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt
> index 802aa7e..44659dd 100644
> --- a/Documentation/devicetree/bindings/video/exynos_dsim.txt
> +++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt
> @@ -10,13 +10,14 @@ Required properties:
>    - interrupts: should contain DSI interrupt
>    - clocks: list of clock specifiers, must contain an entry for each required
>      entry in clock-names
> -  - clock-names: should include "bus_clk"and "pll_clk" entries
> +  - clock-names: should include "bus_clk"and "sclk_mipi" entries
> +		 the use of "pll_clk" is deprecated
>    - phys: list of phy specifiers, must contain an entry for each required
>      entry in phy-names
>    - phy-names: should include "dsim" entry
>    - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
>    - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
> -  - samsung,pll-clock-frequency: specifies frequency of the "pll_clk" clock
> +  - samsung,pll-clock-frequency: specifies frequency of the oscillator clock
>    - #address-cells, #size-cells: should be set respectively to <1> and <0>
>      according to DSI host bindings (see MIPI DSI bindings [1])
> 
> @@ -48,7 +49,7 @@ Example:
>  		reg = <0x11C80000 0x10000>;
>  		interrupts = <0 79 0>;
>  		clocks = <&clock 286>, <&clock 143>;
> -		clock-names = "bus_clk", "pll_clk";
> +		clock-names = "bus_clk", "sclk_mipi";
>  		phys = <&mipi_phy 1>;
>  		phy-names = "dsim";
>  		vddcore-supply = <&vusb_reg>;
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index c1999ad..a3bfac2 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -235,6 +235,8 @@
>  #define DSI_XFER_TIMEOUT_MS		100
>  #define DSI_RX_FIFO_EMPTY		0x30800002
> 
> +#define OLD_SCLK_MIPI_CLK_NAME "pll_clk"
> +
>  enum exynos_dsi_transfer_type {
>  	EXYNOS_DSI_TX,
>  	EXYNOS_DSI_RX,
> @@ -279,7 +281,7 @@ struct exynos_dsi {
> 
>  	void __iomem *reg_base;
>  	struct phy *phy;
> -	struct clk *pll_clk;
> +	struct clk *sclk_clk;
>  	struct clk *bus_clk;
>  	struct regulator_bulk_data supplies[2];
>  	int irq;
> @@ -433,16 +435,7 @@ static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
>  	u16 m;
>  	u32 reg;
> 
> -	clk_set_rate(dsi->pll_clk, dsi->pll_clk_rate);
> -
> -	fin = clk_get_rate(dsi->pll_clk);
> -	if (!fin) {
> -		dev_err(dsi->dev, "failed to get PLL clock frequency\n");
> -		return 0;
> -	}
> -
> -	dev_dbg(dsi->dev, "PLL input frequency: %lu\n", fin);
> -
> +	fin = dsi->pll_clk_rate;
>  	fout = exynos_dsi_pll_find_pms(dsi, fin, freq, &p, &m, &s);
>  	if (!fout) {
>  		dev_err(dsi->dev,
> @@ -1313,10 +1306,10 @@ static int exynos_dsi_poweron(struct exynos_dsi *dsi)
>  		goto err_bus_clk;
>  	}
> 
> -	ret = clk_prepare_enable(dsi->pll_clk);
> +	ret = clk_prepare_enable(dsi->sclk_clk);
>  	if (ret < 0) {
>  		dev_err(dsi->dev, "cannot enable pll clock %d\n", ret);
> -		goto err_pll_clk;
> +		goto err_sclk_clk;
>  	}
> 
>  	ret = phy_power_on(dsi->phy);
> @@ -1328,8 +1321,8 @@ static int exynos_dsi_poweron(struct exynos_dsi *dsi)
>  	return 0;
> 
>  err_phy:
> -	clk_disable_unprepare(dsi->pll_clk);
> -err_pll_clk:
> +	clk_disable_unprepare(dsi->sclk_clk);
> +err_sclk_clk:
>  	clk_disable_unprepare(dsi->bus_clk);
>  err_bus_clk:
>  	regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
> @@ -1355,7 +1348,7 @@ static void exynos_dsi_poweroff(struct exynos_dsi *dsi)
> 
>  	phy_power_off(dsi->phy);
> 
> -	clk_disable_unprepare(dsi->pll_clk);
> +	clk_disable_unprepare(dsi->sclk_clk);
>  	clk_disable_unprepare(dsi->bus_clk);
> 
>  	ret = regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
> @@ -1722,10 +1715,13 @@ static int exynos_dsi_probe(struct platform_device *pdev)
>  		return -EPROBE_DEFER;
>  	}
> 
> -	dsi->pll_clk = devm_clk_get(dev, "pll_clk");
> -	if (IS_ERR(dsi->pll_clk)) {
> -		dev_info(dev, "failed to get dsi pll input clock\n");
> -		return PTR_ERR(dsi->pll_clk);
> +	dsi->sclk_clk = devm_clk_get(dev, "sclk_mipi");
> +	if (IS_ERR(dsi->sclk_clk)) {
> +		dsi->sclk_clk = devm_clk_get(dev, OLD_SCLK_MIPI_CLK_NAME);
> +		if (IS_ERR(dsi->sclk_clk)) {
> +			dev_info(dev, "failed to get dsi sclk clock\n");
> +			eturn PTR_ERR(dsi->sclk_clk);
> +		}
>  	}
> 
>  	dsi->bus_clk = devm_clk_get(dev, "bus_clk");
> --
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in