diff mbox

[net-next,2/4] switchdev: documentation: fix grammer error

Message ID 1433389423-58467-3-git-send-email-sfeldma@gmail.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Scott Feldman June 4, 2015, 3:43 a.m. UTC 
From: Scott Feldman <sfeldma@gmail.com>

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
---
 Documentation/networking/switchdev.txt |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Jiri Pirko June 4, 2015, 6:17 a.m. UTC | #1 
Thu, Jun 04, 2015 at 05:43:41AM CEST, sfeldma@gmail.com wrote:
>From: Scott Feldman <sfeldma@gmail.com>
>
>Signed-off-by: Scott Feldman <sfeldma@gmail.com>

Acked-by: Jiri Pirko <jiri@resnulli.us>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sergei Shtylyov June 4, 2015, 2:14 p.m. UTC | #2 
Hello.

    It would have been good if you didn't add other errors while fixing. :-)
s/grammer/grammar/ in the subject.

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt
index 5061d6e..0554b68 100644
--- a/Documentation/networking/switchdev.txt
+++ b/Documentation/networking/switchdev.txt
@@ -142,7 +142,7 @@  The port netdevs representing the physical switch ports can be organized into
 higher-level switching constructs.  The default construct is a standalone
 router port, used to offload L3 forwarding.  Two or more ports can be bonded
 together to form a LAG.  Two or more ports (or LAGs) can be bridged to bridge
-to L2 networks.  VLANs can be applied to sub-divide L2 networks.  L2-over-L3
+L2 networks.  VLANs can be applied to sub-divide L2 networks.  L2-over-L3
 tunnels can be built on ports.  These constructs are built using standard Linux
 tools such as the bridge driver, the bonding/team drivers, and netlink-based
 tools such as iproute2.