| Message ID | 20150526145149.29899.24836.stgit@tlendack-t1.amdoffice.net |
|---|---|
| State | Accepted, archived |
| Delegated to: | David Miller |
| Headers | show |
On 05/26/2015 09:51 AM, Tom Lendacky wrote: > When the ethtool command is used to set the speed of the device while > the device is down, the check to set the initial mode may fail when > the device is brought up, causing failure to bring the device up. > > Update the code to set the initial mode based on the desired speed if > auto-negotiation is disabled. > > This patch fixes a bug introduced by: > d9663c8c2149 ("amd-xgbe-phy: Use phydev advertising field vs supported") > > Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> > --- > drivers/net/phy/amd-xgbe-phy.c | 45 +++++++++++++++++++++++++++++++++++++--- > 1 file changed, 42 insertions(+), 3 deletions(-) > Hi David, Just a heads up on this patch. With the removal of this file in net-next you'll have a conflict when merging into net-next. My updates from the other day to net-next fix this bug in the new file/location. Thanks, Tom -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Tom Lendacky <thomas.lendacky@amd.com> Date: Tue, 26 May 2015 09:57:33 -0500 > On 05/26/2015 09:51 AM, Tom Lendacky wrote: >> When the ethtool command is used to set the speed of the device while >> the device is down, the check to set the initial mode may fail when >> the device is brought up, causing failure to bring the device up. >> >> Update the code to set the initial mode based on the desired speed if >> auto-negotiation is disabled. >> >> This patch fixes a bug introduced by: >> d9663c8c2149 ("amd-xgbe-phy: Use phydev advertising field vs >> supported") >> >> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> >> --- >> drivers/net/phy/amd-xgbe-phy.c | 45 >> +++++++++++++++++++++++++++++++++++++--- >> 1 file changed, 42 insertions(+), 3 deletions(-) >> > > Hi David, > > Just a heads up on this patch. With the removal of this file in > net-next > you'll have a conflict when merging into net-next. My updates from the > other day to net-next fix this bug in the new file/location. Ok, applied, and thanks for the heads up about the conflict. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c index fb276f6..34a75cb 100644 --- a/drivers/net/phy/amd-xgbe-phy.c +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -755,6 +755,45 @@ static int amd_xgbe_phy_set_mode(struct phy_device *phydev, return ret; } +static bool amd_xgbe_phy_use_xgmii_mode(struct phy_device *phydev) +{ + if (phydev->autoneg == AUTONEG_ENABLE) { + if (phydev->advertising & ADVERTISED_10000baseKR_Full) + return true; + } else { + if (phydev->speed == SPEED_10000) + return true; + } + + return false; +} + +static bool amd_xgbe_phy_use_gmii_2500_mode(struct phy_device *phydev) +{ + if (phydev->autoneg == AUTONEG_ENABLE) { + if (phydev->advertising & ADVERTISED_2500baseX_Full) + return true; + } else { + if (phydev->speed == SPEED_2500) + return true; + } + + return false; +} + +static bool amd_xgbe_phy_use_gmii_mode(struct phy_device *phydev) +{ + if (phydev->autoneg == AUTONEG_ENABLE) { + if (phydev->advertising & ADVERTISED_1000baseKX_Full) + return true; + } else { + if (phydev->speed == SPEED_1000) + return true; + } + + return false; +} + static int amd_xgbe_phy_set_an(struct phy_device *phydev, bool enable, bool restart) { @@ -1235,11 +1274,11 @@ static int amd_xgbe_phy_config_init(struct phy_device *phydev) /* Set initial mode - call the mode setting routines * directly to insure we are properly configured */ - if (phydev->advertising & SUPPORTED_10000baseKR_Full) + if (amd_xgbe_phy_use_xgmii_mode(phydev)) ret = amd_xgbe_phy_xgmii_mode(phydev); - else if (phydev->advertising & SUPPORTED_1000baseKX_Full) + else if (amd_xgbe_phy_use_gmii_mode(phydev)) ret = amd_xgbe_phy_gmii_mode(phydev); - else if (phydev->advertising & SUPPORTED_2500baseX_Full) + else if (amd_xgbe_phy_use_gmii_2500_mode(phydev)) ret = amd_xgbe_phy_gmii_2500_mode(phydev); else ret = -EINVAL;
When the ethtool command is used to set the speed of the device while the device is down, the check to set the initial mode may fail when the device is brought up, causing failure to bring the device up. Update the code to set the initial mode based on the desired speed if auto-negotiation is disabled. This patch fixes a bug introduced by: d9663c8c2149 ("amd-xgbe-phy: Use phydev advertising field vs supported") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> --- drivers/net/phy/amd-xgbe-phy.c | 45 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 42 insertions(+), 3 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html