@@ -33,6 +33,7 @@
#include "hw/pci/msix.h"
#include "hw/pci/pci.h"
#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pci_bus.h"
#include "qemu-common.h"
#include "qemu/error-report.h"
#include "qemu/event_notifier.h"
@@ -170,6 +171,7 @@ typedef struct VFIOPCIDevice {
bool req_enabled;
bool has_flr;
bool has_pm_reset;
+ bool has_bus_reset;
bool rom_read_failed;
} VFIOPCIDevice;
@@ -203,6 +205,7 @@ static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr,
uint32_t val, int len);
static void vfio_mmap_set_enabled(VFIOPCIDevice *vdev, bool enabled);
+static void vfio_check_host_bus_reset(VFIOPCIDevice *vdev);
/*
* Disabling BAR mmaping can be slow, but toggling it around INTx can
@@ -2853,6 +2856,20 @@ static int vfio_setup_aer(VFIOPCIDevice *vdev, int pos, uint16_t size)
dev_iter = pci_bridge_get_device(dev_iter->bus);
}
+ /*
+ * Don't check reset when device is enabled during qemu machine creation:
+ * which is done by machine init function.
+ */
+ if (DEVICE(vdev)->hotplugged) {
+ vfio_check_host_bus_reset(vdev);
+ if (!vdev->has_bus_reset) {
+ error_report("vfio: Cannot enable AER for device %s, "
+ "which is not support host bus reset.",
+ vdev->vbasedev.name);
+ goto error;
+ }
+ }
+
errcap = vfio_pci_read_config(pdev, pdev->exp.aer_cap + PCI_ERR_CAP, 4);
/*
* The ability to record multiple headers is depending on
@@ -3678,6 +3695,102 @@ static void vfio_setup_resetfn(VFIOPCIDevice *vdev)
}
}
+struct VfioDeviceFind {
+ PCIDevice *pdev;
+ bool found;
+};
+
+static void find_devices(PCIBus *bus, void *opaque)
+{
+ struct VfioDeviceFind *find = opaque;
+ int i;
+
+ if (find->found == true) {
+ return;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(bus->devices); i++) {
+ if (!bus->devices[i]) {
+ continue;
+ }
+
+ if (bus->devices[i] == find->pdev) {
+ find->found = true;
+ break;
+ }
+ }
+}
+
+static void vfio_check_host_bus_reset(VFIOPCIDevice *vdev)
+{
+ PCIBus *bus = vdev->pdev.bus;
+ struct vfio_pci_hot_reset_info *info = NULL;
+ struct vfio_pci_dependent_device *devices;
+ VFIOGroup *group;
+ int ret, i;
+
+ ret = vfio_get_hot_reset_info(vdev, &info);
+ if (ret < 0) {
+ goto out;
+ }
+
+ /* List all affected devices by bus reset */
+ devices = &info->devices[0];
+
+ /* Verify that we have all the groups required */
+ for (i = 0; i < info->count; i++) {
+ PCIHostDeviceAddress host;
+ VFIOPCIDevice *tmp;
+ VFIODevice *vbasedev_iter;
+ bool found = false;
+
+ host.domain = devices[i].segment;
+ host.bus = devices[i].bus;
+ host.slot = PCI_SLOT(devices[i].devfn);
+ host.function = PCI_FUNC(devices[i].devfn);
+
+ /* Skip the current device */
+ if (vfio_pci_host_match(&host, &vdev->host)) {
+ continue;
+ }
+
+ /* Ensure we own the group of the affected device */
+ QLIST_FOREACH(group, &vfio_group_list, next) {
+ if (group->groupid == devices[i].group_id) {
+ break;
+ }
+ }
+
+ if (!group) {
+ goto out;
+ }
+
+ /* Ensure affected devices for reset under the same bus */
+ QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
+ if (vbasedev_iter->type != VFIO_DEVICE_TYPE_PCI) {
+ continue;
+ }
+ tmp = container_of(vbasedev_iter, VFIOPCIDevice, vbasedev);
+ if (vfio_pci_host_match(&host, &tmp->host)) {
+ struct VfioDeviceFind find = { .pdev = &tmp->pdev, .found = false };
+
+ pci_for_each_bus(bus, find_devices, &find);
+ found = find.found;
+ break;
+ }
+ }
+
+ if (!found) {
+ goto out;
+ }
+ }
+
+ vdev->has_bus_reset = true;
+
+out:
+ g_free(info);
+}
+
static int vfio_initfn(PCIDevice *pdev)
{
VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
we introduce a has_bus_reset capability to sign the vfio devices if support host bus reset. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> --- hw/vfio/pci.c | 113 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 113 insertions(+)