| Message ID | 1432214964-40644-2-git-send-email-yh.huang@mediatek.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Thu, May 21, 2015 at 09:29:23PM +0800, YH Huang wrote: > Document the device-tree binding of MediatTek display PWM. s/MediatTek/MediaTek/ > > Signed-off-by: YH Huang <yh.huang@mediatek.com> This could use a more verbose commit message. You could mention what the PWM is typically used for (display I presume). Perhaps mention how many channels it exposes and so on. > --- > .../devicetree/bindings/pwm/pwm-mtk-disp.txt | 25 ++++++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt > > diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt > new file mode 100644 > index 0000000..f55bf92 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt > @@ -0,0 +1,25 @@ > +MediaTek display PWM controller > + > +Required properties: > + - compatible: should be "mediatek,<name>-disp-pwm" > + - "mediatek,mt8173-disp-pwm": found on mt8173 SoC > + - "mediatek,mt6595-disp-pwm": found on mt6595 SoC > + - reg: physical base address and length of the controller's registers > + - #pwm-cells: must be 2. See pwm.txt in this directory > + for a description of the cell format You can use the full line width of 78/80 characters, no need to wrap this prematurely. > + - clocks: phandle and clock specifier of the PWM reference clock > + - clock-names: must contain the following > + - "main": clock used to generate PWM signals > + - "mm": sync signals from the modules of mmsys > + > +Example: > + pwm0: pwm@1401e000 { > + compatible = "mediatek,mt8173-disp-pwm", > + "mediatek,mt6595-disp-pwm"; > + reg = <0 0x1401e000 0 0x1000>; > + #pwm-cells = <2>; > + clocks = <&mmsys MM_DISP_PWM026M>, > + <&mmsys MM_DISP_PWM0MM>; > + clock-names = "main", > + "mm"; No need to waste a line, clock-names = "main", "mm"; fits on a single line just fine. Thierry
On Fri, 2015-06-12 at 12:23 +0200, Thierry Reding wrote: > On Thu, May 21, 2015 at 09:29:23PM +0800, YH Huang wrote: > > Document the device-tree binding of MediatTek display PWM. > > s/MediatTek/MediaTek/ > > > > > Signed-off-by: YH Huang <yh.huang@mediatek.com> > > This could use a more verbose commit message. You could mention what the > PWM is typically used for (display I presume). Perhaps mention how many > channels it exposes and so on. I will add more information in the commit message. > > > --- > > .../devicetree/bindings/pwm/pwm-mtk-disp.txt | 25 ++++++++++++++++++++++ > > 1 file changed, 25 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt > > > > diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt > > new file mode 100644 > > index 0000000..f55bf92 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt > > @@ -0,0 +1,25 @@ > > +MediaTek display PWM controller > > + > > +Required properties: > > + - compatible: should be "mediatek,<name>-disp-pwm" > > + - "mediatek,mt8173-disp-pwm": found on mt8173 SoC > > + - "mediatek,mt6595-disp-pwm": found on mt6595 SoC > > + - reg: physical base address and length of the controller's registers > > + - #pwm-cells: must be 2. See pwm.txt in this directory > > + for a description of the cell format > > You can use the full line width of 78/80 characters, no need to wrap > this prematurely. OK. > > > + - clocks: phandle and clock specifier of the PWM reference clock > > + - clock-names: must contain the following > > + - "main": clock used to generate PWM signals > > + - "mm": sync signals from the modules of mmsys > > + > > +Example: > > + pwm0: pwm@1401e000 { > > + compatible = "mediatek,mt8173-disp-pwm", > > + "mediatek,mt6595-disp-pwm"; > > + reg = <0 0x1401e000 0 0x1000>; > > + #pwm-cells = <2>; > > + clocks = <&mmsys MM_DISP_PWM026M>, > > + <&mmsys MM_DISP_PWM0MM>; > > + clock-names = "main", > > + "mm"; > > No need to waste a line, > > clock-names = "main", "mm"; > > fits on a single line just fine. OK. > > Thierry Thank for your suggestion. Regards, YH Huang -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt new file mode 100644 index 0000000..f55bf92 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt @@ -0,0 +1,25 @@ +MediaTek display PWM controller + +Required properties: + - compatible: should be "mediatek,<name>-disp-pwm" + - "mediatek,mt8173-disp-pwm": found on mt8173 SoC + - "mediatek,mt6595-disp-pwm": found on mt6595 SoC + - reg: physical base address and length of the controller's registers + - #pwm-cells: must be 2. See pwm.txt in this directory + for a description of the cell format + - clocks: phandle and clock specifier of the PWM reference clock + - clock-names: must contain the following + - "main": clock used to generate PWM signals + - "mm": sync signals from the modules of mmsys + +Example: + pwm0: pwm@1401e000 { + compatible = "mediatek,mt8173-disp-pwm", + "mediatek,mt6595-disp-pwm"; + reg = <0 0x1401e000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys MM_DISP_PWM026M>, + <&mmsys MM_DISP_PWM0MM>; + clock-names = "main", + "mm"; + };
Document the device-tree binding of MediatTek display PWM. Signed-off-by: YH Huang <yh.huang@mediatek.com> --- .../devicetree/bindings/pwm/pwm-mtk-disp.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt