new file mode 100644
@@ -0,0 +1,94 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ compatible = "fsl,fman";
+ ranges = <0 0x400000 0x100000>;
+ reg = <0x400000 0x100000>;
+ interrupts = <96 2 0 0>, <16 2 1 1>;
+ clocks = <&fm0clk>;
+ clock-names = "fm0clk";
+ fsl,qman-channel-range = <0x800 0x10>;
+
+ muram@0 {
+ compatible = "fsl,fman-muram";
+ reg = <0x0 0x30000>;
+ };
+
+ fman0_oh_0x2: port@82000 {
+ cell-index = <0x2>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x82000 0x1000>;
+ };
+
+ fman0_oh_0x3: port@83000 {
+ cell-index = <0x3>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x83000 0x1000>;
+ };
+
+ fman0_oh_0x4: port@84000 {
+ cell-index = <0x4>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x84000 0x1000>;
+ };
+
+ fman0_oh_0x5: port@85000 {
+ cell-index = <0x5>;
+ compatible = "fsl,fman-v3-port-oh";
+ reg = <0x85000 0x1000>;
+ };
+
+ mdio0: mdio@fc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfc000 0x1000>;
+ };
+
+ xmdio0: mdio@fd000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+ reg = <0xfd000 0x1000>;
+ };
+
+ ptp_timer0: ptp-timer@fe000 {
+ compatible = "fsl,fman-ptp-timer";
+ reg = <0xfe000 0x1000>;
+ };
+};
@@ -344,6 +344,14 @@
reg = <0xe0000 0xe00>;
fsl,has-rstcr;
fsl,liodn-bits = <12>;
+
+ fm0clk: fm0-clk-mux {
+ #clock-cells = <0>;
+ compatible = "fsl,fman-clk-mux";
+ clocks = <&pll0 1>;
+ clock-names = "pll0-div2";
+ clock-output-names = "fm0-clk";
+ };
};
/include/ "qoriq-clockgen2.dtsi"
@@ -436,4 +444,23 @@ sata@220000 {
/include/ "qoriq-sec5.0-0.dtsi"
/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+ fman@400000 {
+ enet0: ethernet@e0000 {
+ };
+
+ enet1: ethernet@e2000 {
+ };
+
+ enet2: ethernet@e4000 {
+ };
+
+ enet3: ethernet@e6000 {
+ };
+ };
};
@@ -59,6 +59,12 @@
sdhc = &sdhc;
crypto = &crypto;
+
+ fman0 = &fman0;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
};
cpus {
@@ -128,6 +128,46 @@
i2c@118100 {
};
+ fman@400000 {
+ fm1mac1: ethernet@e0000 {
+ phy-handle = <&sgmii_rtk_phy2>;
+ phy-connection-type = "sgmii";
+ sleep = <&rcpm 0x80000000>;
+ };
+
+ fm1mac2: ethernet@e2000 {
+ sleep = <&rcpm 0x40000000>;
+ };
+
+ fm1mac3: ethernet@e4000 {
+ phy-handle = <&sgmii_aqr_phy3>;
+ phy-connection-type = "sgmii-2500";
+ sleep = <&rcpm 0x20000000>;
+ };
+
+ fm1mac4: ethernet@e6000 {
+ phy-handle = <&rgmii_rtk_phy1>;
+ phy-connection-type = "rgmii";
+ sleep = <&rcpm 0x10000000>;
+ };
+
+
+ mdio0: mdio@fc000 {
+ rgmii_rtk_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ sgmii_rtk_phy2: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+ };
+
+ xmdio0: mdio@fd000 {
+ sgmii_aqr_phy3: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x2>;
+ };
+ };
+ };
};
pci0: pcie@ffe240000 {
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com> --- arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi | 94 +++++++++++++++++++++++++++ arch/powerpc/boot/dts/fsl/t1023si-post.dtsi | 27 ++++++++ arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi | 6 ++ arch/powerpc/boot/dts/t1023rdb.dts | 40 ++++++++++++ 4 files changed, 167 insertions(+) create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi