Message ID | 1432043357-558-1-git-send-email-punnaia@xilinx.com |
---|---|
State | Superseded, archived |
Headers | show |
On Tue, May 19, 2015 at 07:19:17PM +0530, Punnaiah Choudary Kalluri wrote: > Added the basic driver for Arasan Nand Flash Controller used in > Zynq UltraScale+ MPSoC. It supports only Hw Ecc and upto 24bit > correction. > > Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> > Tested-by: Michal Simek <michal.simek@xilinx.com> > --- > Changes in v2: > - Added missing of.h to avoid kbuild system report error > --- > drivers/mtd/nand/Kconfig | 7 + > drivers/mtd/nand/Makefile | 1 + > drivers/mtd/nand/arasan_nfc.c | 862 +++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 870 insertions(+), 0 deletions(-) > create mode 100644 drivers/mtd/nand/arasan_nfc.c > > diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig > index 5897d8d..64e497c 100644 > --- a/drivers/mtd/nand/Kconfig > +++ b/drivers/mtd/nand/Kconfig > @@ -530,4 +530,11 @@ config MTD_NAND_HISI504 > help > Enables support for NAND controller on Hisilicon SoC Hip04. > > +config MTD_NAND_ARASAN > + tristate "Support for Arasan Nand Flash controller" > + depends on MTD_NAND > + help > + Enables the driver for the Arasan Nand Flash controller on > + Zynq UltraScale+ MPSoC. > + > endif # MTD_NAND > diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile > index 582bbd05..fd863ea 100644 > --- a/drivers/mtd/nand/Makefile > +++ b/drivers/mtd/nand/Makefile > @@ -52,5 +52,6 @@ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o > obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ > obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o > obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o > +obj-$(CONFIG_MTD_NAND_ARASAN) += arasan_nfc.o > > nand-objs := nand_base.o nand_bbt.o nand_timings.o > diff --git a/drivers/mtd/nand/arasan_nfc.c b/drivers/mtd/nand/arasan_nfc.c > new file mode 100644 > index 0000000..5736864 > --- /dev/null > +++ b/drivers/mtd/nand/arasan_nfc.c > @@ -0,0 +1,862 @@ > +/* > + * Arasan Nand Flash Controller Driver > + * > + * Copyright (C) 2014 - 2015 Xilinx, Inc. > + * > + * This program is free software; you can redistribute it and/or modify it under > + * the terms of the GNU General Public License version 2 as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + */ > + > +#include <linux/delay.h> > +#include <linux/dma-mapping.h> > +#include <linux/interrupt.h> > +#include <linux/module.h> > +#include <linux/mtd/mtd.h> > +#include <linux/mtd/nand.h> > +#include <linux/mtd/partitions.h> > +#include <linux/of.h> > +#include <linux/of_mtd.h> > +#include <linux/platform_device.h> > + > +#define DRIVER_NAME "arasan_nfc" > +#define EVNT_TIMEOUT 1000 > +#define STATUS_TIMEOUT 2000 > + > +#define PKT_OFST 0x00 > +#define MEM_ADDR1_OFST 0x04 > +#define MEM_ADDR2_OFST 0x08 > +#define CMD_OFST 0x0C > +#define PROG_OFST 0x10 > +#define INTR_STS_EN_OFST 0x14 > +#define INTR_SIG_EN_OFST 0x18 > +#define INTR_STS_OFST 0x1C > +#define READY_STS_OFST 0x20 > +#define DMA_ADDR1_OFST 0x24 > +#define FLASH_STS_OFST 0x28 > +#define DATA_PORT_OFST 0x30 > +#define ECC_OFST 0x34 > +#define ECC_ERR_CNT_OFST 0x38 > +#define ECC_SPR_CMD_OFST 0x3C > +#define ECC_ERR_CNT_1BIT_OFST 0x40 > +#define ECC_ERR_CNT_2BIT_OFST 0x44 > +#define DMA_ADDR0_OFST 0x50 > + > +#define PKT_CNT_SHIFT 12 > + > +#define ECC_ENABLE BIT(31) > +#define DMA_EN_MASK GENMASK(27, 26) > +#define DMA_ENABLE 0x2 > +#define DMA_EN_SHIFT 26 > +#define PAGE_SIZE_MASK GENMASK(25, 23) > +#define PAGE_SIZE_SHIFT 23 > +#define PAGE_SIZE_512 0 > +#define PAGE_SIZE_1K 5 > +#define PAGE_SIZE_2K 1 > +#define PAGE_SIZE_4K 2 > +#define PAGE_SIZE_8K 3 > +#define PAGE_SIZE_16K 4 > +#define CMD2_SHIFT 8 > +#define ADDR_CYCLES_SHIFT 28 > + > +#define XFER_COMPLETE BIT(2) > +#define READ_READY BIT(1) > +#define WRITE_READY BIT(0) > +#define MBIT_ERROR BIT(3) > +#define ERR_INTRPT BIT(4) > + > +#define PROG_PGRD BIT(0) > +#define PROG_ERASE BIT(2) > +#define PROG_STATUS BIT(3) > +#define PROG_PGPROG BIT(4) > +#define PROG_RDID BIT(6) > +#define PROG_RDPARAM BIT(7) > +#define PROG_RST BIT(8) > + > +#define ONFI_STATUS_FAIL BIT(0) > +#define ONFI_STATUS_READY BIT(6) > + > +#define PG_ADDR_SHIFT 16 > +#define BCH_MODE_SHIFT 25 > +#define BCH_EN_SHIFT 27 > +#define ECC_SIZE_SHIFT 16 > + > +#define MEM_ADDR_MASK GENMASK(7, 0) > +#define BCH_MODE_MASK GENMASK(27, 25) > + > +#define CS_MASK GENMASK(31, 30) > +#define CS_SHIFT 30 > + > +#define PAGE_ERR_CNT_MASK GENMASK(16, 8) > +#define PKT_ERR_CNT_MASK GENMASK(7, 0) > + > +#define ONFI_ID_LEN 8 > +#define TEMP_BUF_SIZE 512 > + > +/** > + * struct anfc_ecc_matrix - Defines ecc information storage format > + * @pagesize: Page size in bytes. > + * @codeword_size: Code word size information. > + * @eccbits: Number of ecc bits. > + * @bch: Bch / Hamming mode enable/disable. > + * @eccsize: Ecc size information. > + */ > +struct anfc_ecc_matrix { > + u32 pagesize; > + u32 codeword_size; > + u8 eccbits; > + u8 bch; > + u16 eccsize; > +}; > + > +static const struct anfc_ecc_matrix ecc_matrix[] = { > + {512, 512, 1, 0, 0x3}, > + {512, 512, 4, 1, 0x7}, > + {512, 512, 8, 1, 0xD}, > + /* 2K byte page */ > + {2048, 512, 1, 0, 0xC}, > + {2048, 512, 4, 1, 0x1A}, > + {2048, 512, 8, 1, 0x34}, > + {2048, 512, 12, 1, 0x4E}, > + {2048, 1024, 24, 1, 0x54}, > + /* 4K byte page */ > + {4096, 512, 1, 0, 0x18}, > + {4096, 512, 4, 1, 0x34}, > + {4096, 512, 8, 1, 0x68}, > + {4096, 512, 12, 1, 0x9C}, > + {4096, 1024, 4, 1, 0xA8}, > + /* 8K byte page */ > + {8192, 512, 1, 0, 0x30}, > + {8192, 512, 4, 1, 0x68}, > + {8192, 512, 8, 1, 0xD0}, > + {8192, 512, 12, 1, 0x138}, > + {8192, 1024, 24, 1, 0x150}, > + /* 16K byte page */ > + {16384, 512, 1, 0, 0x60}, > + {16384, 512, 4, 1, 0xD0}, > + {16384, 512, 8, 1, 0x1A0}, > + {16384, 512, 12, 1, 0x270}, > + {16384, 1024, 24, 1, 0x2A0} > +}; > + > +/** > + * struct anfc - Defines the Arasan NAND flash driver instance > + * @chip: NAND chip information structure. > + * @mtd: MTD information structure. > + * @parts: Pointer to the mtd_partition structure. > + * @dev: Pointer to the device structure. > + * @base: Virtual address of the NAND flash device. > + * @curr_cmd: Current command issued. > + * @dma: Dma enable/disable. > + * @bch: Bch / Hamming mode enable/disable. > + * @err: Error identifier. > + * @iswriteoob: Identifies if oob write operation is required. > + * @buf: Buffer used for read/write byte operations. > + * @raddr_cycles: Row address cycle information. > + * @caddr_cycles: Column address cycle information. > + * @irq: irq number > + * @page: Page address to be use for write oob operations. > + * @pktsize: Packet size for read / write operation. > + * @bufshift: Variable used for indexing buffer operation > + * @rdintrmask: Interrupt mask value for read operation. > + * @bufrdy: Completion event for buffer ready. > + * @xfercomp: Completion event for transfer complete. > + * @ecclayout: Ecc layout object > + */ > +struct anfc { > + struct nand_chip chip; > + struct mtd_info mtd; > + struct mtd_partition *parts; ^^ This field is unused. > + struct device *dev; > + > + void __iomem *base; > + int curr_cmd; > + > + bool dma; > + bool bch; > + bool err; > + bool iswriteoob; > + > + u8 buf[TEMP_BUF_SIZE]; > + > + u16 raddr_cycles; > + u16 caddr_cycles; > + > + u32 irq; > + u32 page; > + u32 pktsize; > + u32 bufshift; > + u32 rdintrmask; > + > + struct completion bufrdy; > + struct completion xfercomp; > + struct nand_ecclayout ecclayout; > +}; > + > +static u8 anfc_page(u32 pagesize) > +{ > + switch (pagesize) { > + case 512: > + return PAGE_SIZE_512; > + case 2048: > + return PAGE_SIZE_2K; > + case 4096: > + return PAGE_SIZE_4K; > + case 8192: > + return PAGE_SIZE_8K; > + case 16384: > + return PAGE_SIZE_16K; > + case 1024: > + return PAGE_SIZE_1K; > + default: > + break; > + } > + > + return 0; > +} > + > +static inline void anfc_enable_intrs(struct anfc *nfc, u32 val) > +{ > + writel(val, nfc->base + INTR_STS_EN_OFST); > + writel(val, nfc->base + INTR_SIG_EN_OFST); > +} > + > +static int anfc_wait_for_event(struct anfc *nfc, u32 event) > +{ > + struct completion *comp; > + int ret; > + > + if (event == XFER_COMPLETE) > + comp = &nfc->xfercomp; > + else > + comp = &nfc->bufrdy; > + > + ret = wait_for_completion_timeout(comp, msecs_to_jiffies(EVNT_TIMEOUT)); > + > + return ret; > +} > + > +static inline void anfc_setpktszcnt(struct anfc *nfc, u32 pktsize, > + u32 pktcount) > +{ > + writel(pktsize | (pktcount << PKT_CNT_SHIFT), nfc->base + PKT_OFST); > +} > + > +static inline void anfc_set_eccsparecmd(struct anfc *nfc, u8 cmd1, u8 cmd2) > +{ > + writel(cmd1 | (cmd2 << CMD2_SHIFT) | > + (nfc->caddr_cycles << ADDR_CYCLES_SHIFT), > + nfc->base + ECC_SPR_CMD_OFST); > +} > + > +static void anfc_setpagecoladdr(struct anfc *nfc, u32 page, u16 col) > +{ > + u32 val; > + > + writel(col | (page << PG_ADDR_SHIFT), nfc->base + MEM_ADDR1_OFST); > + > + val = readl(nfc->base + MEM_ADDR2_OFST); > + val = (val & ~MEM_ADDR_MASK) | > + ((page >> PG_ADDR_SHIFT) & MEM_ADDR_MASK); > + writel(val, nfc->base + MEM_ADDR2_OFST); > +} > + > +static void anfc_prepare_cmd(struct anfc *nfc, u8 cmd1, u8 cmd2, > + u8 dmamode, u32 pagesize, u8 addrcycles) > +{ > + u32 regval; > + > + regval = cmd1 | (cmd2 << CMD2_SHIFT); > + if (dmamode && nfc->dma) > + regval |= DMA_ENABLE << DMA_EN_SHIFT; > + if (addrcycles) > + regval |= addrcycles << ADDR_CYCLES_SHIFT; > + if (pagesize) > + regval |= anfc_page(pagesize) << PAGE_SIZE_SHIFT; > + writel(regval, nfc->base + CMD_OFST); > +} > + > +static int anfc_device_ready(struct mtd_info *mtd, > + struct nand_chip *chip) > +{ > + u8 status; > + u32 timeout = STATUS_TIMEOUT; > + > + while (timeout--) { > + chip->cmdfunc(mtd, NAND_CMD_STATUS, 0, 0); > + status = chip->read_byte(mtd); > + if (status & ONFI_STATUS_READY) { > + if (status & ONFI_STATUS_FAIL) > + return NAND_STATUS_FAIL; > + return 0; > + } > + } No, we can't just do a busy-wait loop at an arbitrary count of 2000 cycles. Can you do something that's interrupt-based? Or at least time yourself with jiffies or something similar. > + > + pr_err("%s timed out\n", __func__); > + return -ETIMEDOUT; > +} > + > +static int anfc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, > + int page) > +{ > + struct anfc *nfc = container_of(mtd, struct anfc, mtd); > + > + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); > + if (nfc->dma) > + nfc->rdintrmask = XFER_COMPLETE; > + else > + nfc->rdintrmask = READ_READY; > + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); > + > + return 0; > +} > + > +static int anfc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, > + int page) > +{ > + struct anfc *nfc = container_of(mtd, struct anfc, mtd); > + > + nfc->iswriteoob = true; > + chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); > + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); > + nfc->iswriteoob = false; > + > + return 0; > +} > + > +static void anfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) > +{ > + u32 i, pktcount, buf_rd_cnt = 0, pktsize; > + u32 *bufptr = (u32 *)buf; > + struct anfc *nfc = container_of(mtd, struct anfc, mtd); > + dma_addr_t paddr = 0; > + > + if (nfc->curr_cmd == NAND_CMD_READ0) { > + pktsize = nfc->pktsize; > + if (mtd->writesize % pktsize) > + pktcount = mtd->writesize / pktsize + 1; > + else > + pktcount = mtd->writesize / pktsize; > + } else { > + pktsize = len; > + pktcount = 1; > + } > + > + anfc_setpktszcnt(nfc, pktsize, pktcount); > + > + if (nfc->dma) { > + paddr = dma_map_single(nfc->dev, buf, len, DMA_FROM_DEVICE); > + if (dma_mapping_error(nfc->dev, paddr)) { > + dev_err(nfc->dev, "Read buffer mapping error"); > + return; > + } > + writel(paddr, nfc->base + DMA_ADDR0_OFST); > + writel(paddr >> 32, nfc->base + DMA_ADDR1_OFST); drivers/mtd/nand/arasan_nfc.c: In function ‘anfc_read_buf’: drivers/mtd/nand/arasan_nfc.c:355:3: warning: right shift count >= width of type [enabled by default] writel(paddr >> 32, nfc->base + DMA_ADDR1_OFST); ^ How about using upper_32_bits() and lower_32_bits()? > + anfc_enable_intrs(nfc, nfc->rdintrmask); > + writel(PROG_PGRD, nfc->base + PROG_OFST); > + anfc_wait_for_event(nfc, XFER_COMPLETE); > + dma_unmap_single(nfc->dev, paddr, len, DMA_FROM_DEVICE); > + return; > + } > + > + anfc_enable_intrs(nfc, nfc->rdintrmask); > + writel(PROG_PGRD, nfc->base + PROG_OFST); > + > + while (buf_rd_cnt < pktcount) { > + > + anfc_wait_for_event(nfc, READ_READY); > + buf_rd_cnt++; > + > + if (buf_rd_cnt == pktcount) > + anfc_enable_intrs(nfc, XFER_COMPLETE); > + > + for (i = 0; i < pktsize / 4; i++) > + bufptr[i] = readl(nfc->base + DATA_PORT_OFST); > + > + bufptr += (pktsize / 4); > + > + if (buf_rd_cnt < pktcount) > + anfc_enable_intrs(nfc, nfc->rdintrmask); > + } > + > + anfc_wait_for_event(nfc, XFER_COMPLETE); > +} > + > +static void anfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) > +{ > + u32 buf_wr_cnt = 0, pktcount = 1, i, pktsize; > + u32 *bufptr = (u32 *)buf; > + struct anfc *nfc = container_of(mtd, struct anfc, mtd); > + dma_addr_t paddr = 0; > + > + if (nfc->iswriteoob) { > + pktsize = len; > + pktcount = 1; > + } else { > + pktsize = nfc->pktsize; > + pktcount = mtd->writesize / pktsize; > + } > + > + anfc_setpktszcnt(nfc, pktsize, pktcount); > + > + if (nfc->dma) { > + paddr = dma_map_single(nfc->dev, (void *)buf, len, > + DMA_TO_DEVICE); > + if (dma_mapping_error(nfc->dev, paddr)) { > + dev_err(nfc->dev, "Write buffer mapping error"); > + return; > + } > + writel(paddr, nfc->base + DMA_ADDR0_OFST); > + writel(paddr >> 32, nfc->base + DMA_ADDR1_OFST); Same problem as in read_buf(). > + anfc_enable_intrs(nfc, XFER_COMPLETE); > + writel(PROG_PGPROG, nfc->base + PROG_OFST); > + anfc_wait_for_event(nfc, XFER_COMPLETE); > + dma_unmap_single(nfc->dev, paddr, len, DMA_TO_DEVICE); > + return; > + } > + > + anfc_enable_intrs(nfc, WRITE_READY); > + writel(PROG_PGPROG, nfc->base + PROG_OFST); > + > + while (buf_wr_cnt < pktcount) { > + anfc_wait_for_event(nfc, WRITE_READY); > + > + buf_wr_cnt++; > + if (buf_wr_cnt == pktcount) > + anfc_enable_intrs(nfc, XFER_COMPLETE); > + > + for (i = 0; i < (pktsize / 4); i++) > + writel(bufptr[i], nfc->base + DATA_PORT_OFST); > + > + bufptr += (pktsize / 4); > + > + if (buf_wr_cnt < pktcount) > + anfc_enable_intrs(nfc, WRITE_READY); > + } > + > + anfc_wait_for_event(nfc, XFER_COMPLETE); > +} > + > +static int anfc_read_page_hwecc(struct mtd_info *mtd, > + struct nand_chip *chip, uint8_t *buf, > + int oob_required, int page) > +{ > + u32 val; > + struct anfc *nfc = container_of(mtd, struct anfc, mtd); > + > + anfc_set_eccsparecmd(nfc, NAND_CMD_RNDOUT, NAND_CMD_RNDOUTSTART); > + > + val = readl(nfc->base + CMD_OFST); > + val = val | ECC_ENABLE; > + writel(val, nfc->base + CMD_OFST); > + > + if (nfc->dma) > + nfc->rdintrmask = XFER_COMPLETE; > + else > + nfc->rdintrmask = READ_READY; > + > + if (!nfc->bch) > + nfc->rdintrmask = MBIT_ERROR; > + > + chip->read_buf(mtd, buf, mtd->writesize); > + > + val = readl(nfc->base + ECC_ERR_CNT_OFST); > + if (nfc->bch) { > + mtd->ecc_stats.corrected += val & PAGE_ERR_CNT_MASK; > + } else { > + val = readl(nfc->base + ECC_ERR_CNT_1BIT_OFST); > + mtd->ecc_stats.corrected += val; > + val = readl(nfc->base + ECC_ERR_CNT_2BIT_OFST); > + mtd->ecc_stats.failed += val; > + /* Clear ecc error count register 1Bit, 2Bit */ > + writel(0x0, nfc->base + ECC_ERR_CNT_1BIT_OFST); > + writel(0x0, nfc->base + ECC_ERR_CNT_2BIT_OFST); > + } > + nfc->err = false; > + > + if (oob_required) > + chip->ecc.read_oob(mtd, chip, page); > + > + return 0; > +} > + > +static int anfc_write_page_hwecc(struct mtd_info *mtd, > + struct nand_chip *chip, const uint8_t *buf, > + int oob_required) > +{ > + u32 val, i; > + struct anfc *nfc = container_of(mtd, struct anfc, mtd); > + uint8_t *ecc_calc = chip->buffers->ecccalc; > + uint32_t *eccpos = chip->ecc.layout->eccpos; > + > + anfc_set_eccsparecmd(nfc, NAND_CMD_RNDIN, 0); > + > + val = readl(nfc->base + CMD_OFST); > + val = val | ECC_ENABLE; > + writel(val, nfc->base + CMD_OFST); > + > + chip->write_buf(mtd, buf, mtd->writesize); > + > + if (oob_required) { > + anfc_device_ready(mtd, chip); > + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, nfc->page); > + if (nfc->dma) > + nfc->rdintrmask = XFER_COMPLETE; > + else > + nfc->rdintrmask = READ_READY; > + chip->read_buf(mtd, ecc_calc, mtd->oobsize); > + for (i = 0; i < chip->ecc.total; i++) > + chip->oob_poi[eccpos[i]] = ecc_calc[eccpos[i]]; > + chip->ecc.write_oob(mtd, chip, nfc->page); > + } > + > + return 0; > +} > + > +static u8 anfc_read_byte(struct mtd_info *mtd) > +{ > + struct anfc *nfc = container_of(mtd, struct anfc, mtd); > + > + return nfc->buf[nfc->bufshift++]; > +} > + > +static void anfc_readfifo(struct anfc *nfc, u32 prog, u32 size) > +{ > + u32 i, *bufptr = (u32 *)&nfc->buf[0]; > + > + anfc_enable_intrs(nfc, READ_READY); > + > + writel(prog, nfc->base + PROG_OFST); > + anfc_wait_for_event(nfc, READ_READY); > + > + anfc_enable_intrs(nfc, XFER_COMPLETE); > + > + for (i = 0; i < size / 4; i++) > + bufptr[i] = readl(nfc->base + DATA_PORT_OFST); > + > + anfc_wait_for_event(nfc, XFER_COMPLETE); > +} > + > +static int anfc_ecc_init(struct mtd_info *mtd, > + struct nand_ecc_ctrl *ecc) > +{ > + u32 oob_index, i, ecc_addr, regval, bchmode = 0; > + struct nand_chip *nand_chip = mtd->priv; > + struct anfc *nfc = container_of(mtd, struct anfc, mtd); > + int found = -1; > + > + nand_chip->ecc.mode = NAND_ECC_HW; > + nand_chip->ecc.read_page = anfc_read_page_hwecc; > + nand_chip->ecc.write_page = anfc_write_page_hwecc; > + nand_chip->ecc.write_oob = anfc_write_oob; > + nand_chip->ecc.read_oob = anfc_read_oob; > + > + for (i = 0; i < sizeof(ecc_matrix) / sizeof(struct anfc_ecc_matrix); > + i++) { > + if ((ecc_matrix[i].pagesize == mtd->writesize) && > + (ecc_matrix[i].codeword_size >= nand_chip->ecc_step_ds)) { > + if (ecc_matrix[i].eccbits >= > + nand_chip->ecc_strength_ds) { > + found = i; > + break; > + } > + found = i; > + } > + } > + > + if (found < 0) { > + dev_err(nfc->dev, "ECC scheme not supported"); > + return 1; > + } > + if (ecc_matrix[found].bch) { > + switch (ecc_matrix[found].eccbits) { > + case 12: > + bchmode = 0x1; > + break; > + case 8: > + bchmode = 0x2; > + break; > + case 4: > + bchmode = 0x3; > + break; > + case 24: > + bchmode = 0x4; > + break; > + default: > + bchmode = 0x0; > + } > + } > + > + nand_chip->ecc.strength = ecc_matrix[found].eccbits; > + nand_chip->ecc.size = ecc_matrix[found].codeword_size; > + nand_chip->ecc.steps = ecc_matrix[found].pagesize / > + ecc_matrix[found].codeword_size; > + nand_chip->ecc.bytes = ecc_matrix[found].eccsize / > + nand_chip->ecc.steps; > + nfc->ecclayout.eccbytes = ecc_matrix[found].eccsize; > + nfc->bch = ecc_matrix[found].bch; > + oob_index = nand_chip->onfi_params.spare_bytes_per_page - > + nfc->ecclayout.eccbytes; sparse doesn't like this: drivers/mtd/nand/arasan_nfc.c:599:43: warning: restricted __le16 degrades to integer [sparse] You need to use __le16_to_cpu() when accessing ONFI params. But really, you should be using mtd->oobsize, not onfi_params. > + ecc_addr = mtd->writesize + oob_index; > + > + for (i = 0; i < nand_chip->ecc.size; i++) > + nfc->ecclayout.eccpos[i] = oob_index + i; > + > + nfc->ecclayout.oobfree->offset = 2; > + nfc->ecclayout.oobfree->length = oob_index - > + nfc->ecclayout.oobfree->offset; > + > + nand_chip->ecc.layout = &(nfc->ecclayout); > + regval = ecc_addr | (ecc_matrix[found].eccsize << ECC_SIZE_SHIFT) | > + (ecc_matrix[found].bch << BCH_EN_SHIFT); > + writel(regval, nfc->base + ECC_OFST); > + > + regval = readl(nfc->base + MEM_ADDR2_OFST); > + regval = (regval & ~(BCH_MODE_MASK)) | (bchmode << BCH_MODE_SHIFT); > + writel(regval, nfc->base + MEM_ADDR2_OFST); > + > + if (nand_chip->ecc_step_ds >= 1024) > + nfc->pktsize = 1024; > + else > + nfc->pktsize = 512; > + > + return 0; > +} > + > +static void anfc_cmd_function(struct mtd_info *mtd, > + unsigned int cmd, int column, int page_addr) > +{ > + struct anfc *nfc = container_of(mtd, struct anfc, mtd); > + bool wait = false, read = false; > + u32 addrcycles, prog; > + u32 *bufptr = (u32 *)&nfc->buf[0]; > + > + nfc->bufshift = 0; > + nfc->curr_cmd = cmd; > + > + if (page_addr == -1) > + page_addr = 0; > + if (column == -1) > + column = 0; > + > + switch (cmd) { > + case NAND_CMD_RESET: > + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0); > + prog = PROG_RST; > + wait = true; > + break; > + case NAND_CMD_SEQIN: > + addrcycles = nfc->raddr_cycles + nfc->caddr_cycles; > + nfc->page = page_addr; > + anfc_prepare_cmd(nfc, cmd, NAND_CMD_PAGEPROG, 1, > + mtd->writesize, addrcycles); > + anfc_setpagecoladdr(nfc, page_addr, column); > + break; > + case NAND_CMD_READOOB: > + column += mtd->writesize; > + case NAND_CMD_READ0: > + case NAND_CMD_READ1: > + addrcycles = nfc->raddr_cycles + nfc->caddr_cycles; > + anfc_prepare_cmd(nfc, NAND_CMD_READ0, NAND_CMD_READSTART, 1, > + mtd->writesize, addrcycles); > + anfc_setpagecoladdr(nfc, page_addr, column); > + break; > + case NAND_CMD_RNDOUT: > + anfc_prepare_cmd(nfc, cmd, NAND_CMD_RNDOUTSTART, 1, > + mtd->writesize, 2); > + anfc_setpagecoladdr(nfc, page_addr, column); > + if (nfc->dma) > + nfc->rdintrmask = XFER_COMPLETE; > + else > + nfc->rdintrmask = READ_READY; > + break; > + case NAND_CMD_PARAM: > + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1); > + anfc_setpagecoladdr(nfc, page_addr, column); > + anfc_setpktszcnt(nfc, sizeof(struct nand_onfi_params), 1); > + anfc_readfifo(nfc, PROG_RDPARAM, > + sizeof(struct nand_onfi_params)); > + break; > + case NAND_CMD_READID: > + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1); > + anfc_setpagecoladdr(nfc, page_addr, column); > + anfc_setpktszcnt(nfc, ONFI_ID_LEN, 1); > + anfc_readfifo(nfc, PROG_RDID, ONFI_ID_LEN); > + break; > + case NAND_CMD_ERASE1: > + addrcycles = nfc->raddr_cycles; > + prog = PROG_ERASE; > + anfc_prepare_cmd(nfc, cmd, NAND_CMD_ERASE2, 0, 0, addrcycles); > + column = page_addr & 0xffff; > + page_addr = (page_addr >> PG_ADDR_SHIFT) & 0xffff; > + anfc_setpagecoladdr(nfc, page_addr, column); > + wait = true; > + break; > + case NAND_CMD_STATUS: > + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0); > + anfc_setpktszcnt(nfc, 1, 1); > + anfc_setpagecoladdr(nfc, page_addr, column); > + prog = PROG_STATUS; > + wait = read = true; > + break; > + default: > + return; > + } > + > + if (wait) { > + anfc_enable_intrs(nfc, XFER_COMPLETE); > + writel(prog, nfc->base + PROG_OFST); > + anfc_wait_for_event(nfc, XFER_COMPLETE); > + } > + > + if (read) > + bufptr[0] = readl(nfc->base + FLASH_STS_OFST); > +} > + > +static void anfc_select_chip(struct mtd_info *mtd, int num) > +{ > + u32 val; > + struct anfc *nfc = container_of(mtd, struct anfc, mtd); > + > + if (num == -1) > + return; > + > + val = readl(nfc->base + MEM_ADDR2_OFST); > + val = (val & ~(CS_MASK)) | (num << CS_SHIFT); > + writel(val, nfc->base + MEM_ADDR2_OFST); > +} > + > +static irqreturn_t anfc_irq_handler(int irq, void *ptr) > +{ > + struct anfc *nfc = ptr; > + u32 regval = 0, status; > + > + status = readl(nfc->base + INTR_STS_OFST); > + if (status & XFER_COMPLETE) { > + complete(&nfc->xfercomp); > + regval |= XFER_COMPLETE; > + } > + > + if (status & READ_READY) { > + complete(&nfc->bufrdy); > + regval |= READ_READY; > + } > + > + if (status & WRITE_READY) { > + complete(&nfc->bufrdy); > + regval |= WRITE_READY; > + } > + > + if (status & MBIT_ERROR) { > + nfc->err = true; > + complete(&nfc->bufrdy); > + regval |= MBIT_ERROR; > + } > + > + if (regval) { > + writel(regval, nfc->base + INTR_STS_OFST); > + writel(0, nfc->base + INTR_STS_EN_OFST); > + writel(0, nfc->base + INTR_SIG_EN_OFST); > + > + return IRQ_HANDLED; > + } > + > + return IRQ_NONE; > +} > + > +static int anfc_probe(struct platform_device *pdev) > +{ > + struct anfc *nfc; > + struct mtd_info *mtd; > + struct nand_chip *nand_chip; > + struct resource *res; > + struct mtd_part_parser_data ppdata; > + int err; > + > + nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL); > + if (!nfc) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + nfc->base = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(nfc->base)) > + return PTR_ERR(nfc->base); > + > + mtd = &nfc->mtd; > + nand_chip = &nfc->chip; > + nand_chip->priv = nfc; > + mtd->priv = nand_chip; > + mtd->owner = THIS_MODULE; > + mtd->name = DRIVER_NAME; > + nfc->dev = &pdev->dev; You should set mtd->dev.parent too. > + > + nand_chip->cmdfunc = anfc_cmd_function; > + nand_chip->waitfunc = anfc_device_ready; > + nand_chip->chip_delay = 30; > + nand_chip->read_buf = anfc_read_buf; > + nand_chip->write_buf = anfc_write_buf; > + nand_chip->read_byte = anfc_read_byte; > + nand_chip->bbt_options = NAND_BBT_USE_FLASH; > + nand_chip->select_chip = anfc_select_chip; > + mtd->size = nand_chip->chipsize; This line looks superfluous. chipsize isn't even set at this point. > + nfc->dma = of_property_read_bool(pdev->dev.of_node, > + "arasan,has-mdma"); > + platform_set_drvdata(pdev, nfc); > + init_completion(&nfc->bufrdy); > + init_completion(&nfc->xfercomp); > + nfc->irq = platform_get_irq(pdev, 0); Check for errors? > + err = devm_request_irq(&pdev->dev, nfc->irq, anfc_irq_handler, > + 0, "arasannfc", nfc); > + if (err) > + return err; > + > + if (nand_scan_ident(mtd, 1, NULL)) { > + dev_err(&pdev->dev, "nand_scan_ident for NAND failed\n"); > + return -ENXIO; > + } > + nfc->raddr_cycles = nand_chip->onfi_params.addr_cycles & 0xF; > + nfc->caddr_cycles = (nand_chip->onfi_params.addr_cycles >> 4) & 0xF; Do you *have* to get this from ONFI? What if someone uses non-ONFI flash? You should at least check if this is an ONFI flash before using these param values. > + > + if (anfc_ecc_init(mtd, &nand_chip->ecc)) > + return -ENXIO; > + > + if (nand_scan_tail(mtd)) { > + dev_err(&pdev->dev, "nand_scan_tail for NAND failed\n"); > + return -ENXIO; > + } > + > + ppdata.of_node = pdev->dev.of_node; > + > + mtd_device_parse_register(&nfc->mtd, NULL, &ppdata, NULL, 0); > + return 0; You're ignoring the return value from mtd_device_parse_register(). How about: return mtd_device_parse_register(&nfc->mtd, NULL, &ppdata, NULL, 0); > +} > + > +static int anfc_remove(struct platform_device *pdev) > +{ > + struct anfc *nfc = platform_get_drvdata(pdev); > + > + nand_release(&nfc->mtd); > + > + return 0; > +} > + > +static const struct of_device_id anfc_ids[] = { > + { .compatible = "arasan,nfc-v3p10" }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, anfc_ids); > + > +static struct platform_driver anfc_driver = { > + .driver = { > + .name = DRIVER_NAME, > + .of_match_table = anfc_ids, > + }, > + .probe = anfc_probe, > + .remove = anfc_remove, > +}; > +module_platform_driver(anfc_driver); > + > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Xilinx, Inc"); > +MODULE_DESCRIPTION("Arasan NAND Flash Controller Driver"); Brian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, May 21, 2015 at 2:19 AM, Brian Norris <computersforpeace@gmail.com> wrote: > On Tue, May 19, 2015 at 07:19:17PM +0530, Punnaiah Choudary Kalluri wrote: >> Added the basic driver for Arasan Nand Flash Controller used in >> Zynq UltraScale+ MPSoC. It supports only Hw Ecc and upto 24bit >> correction. >> >> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> >> Tested-by: Michal Simek <michal.simek@xilinx.com> >> --- >> Changes in v2: >> - Added missing of.h to avoid kbuild system report error >> --- >> drivers/mtd/nand/Kconfig | 7 + >> drivers/mtd/nand/Makefile | 1 + >> drivers/mtd/nand/arasan_nfc.c | 862 +++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 870 insertions(+), 0 deletions(-) >> create mode 100644 drivers/mtd/nand/arasan_nfc.c >> >> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig >> index 5897d8d..64e497c 100644 >> --- a/drivers/mtd/nand/Kconfig >> +++ b/drivers/mtd/nand/Kconfig >> @@ -530,4 +530,11 @@ config MTD_NAND_HISI504 >> help >> Enables support for NAND controller on Hisilicon SoC Hip04. >> >> +config MTD_NAND_ARASAN >> + tristate "Support for Arasan Nand Flash controller" >> + depends on MTD_NAND >> + help >> + Enables the driver for the Arasan Nand Flash controller on >> + Zynq UltraScale+ MPSoC. >> + >> endif # MTD_NAND >> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile >> index 582bbd05..fd863ea 100644 >> --- a/drivers/mtd/nand/Makefile >> +++ b/drivers/mtd/nand/Makefile >> @@ -52,5 +52,6 @@ obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o >> obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ >> obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o >> obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o >> +obj-$(CONFIG_MTD_NAND_ARASAN) += arasan_nfc.o >> >> nand-objs := nand_base.o nand_bbt.o nand_timings.o >> diff --git a/drivers/mtd/nand/arasan_nfc.c b/drivers/mtd/nand/arasan_nfc.c >> new file mode 100644 >> index 0000000..5736864 >> --- /dev/null >> +++ b/drivers/mtd/nand/arasan_nfc.c >> @@ -0,0 +1,862 @@ >> +/* >> + * Arasan Nand Flash Controller Driver >> + * >> + * Copyright (C) 2014 - 2015 Xilinx, Inc. >> + * >> + * This program is free software; you can redistribute it and/or modify it under >> + * the terms of the GNU General Public License version 2 as published by the >> + * Free Software Foundation; either version 2 of the License, or (at your >> + * option) any later version. >> + */ >> + >> +#include <linux/delay.h> >> +#include <linux/dma-mapping.h> >> +#include <linux/interrupt.h> >> +#include <linux/module.h> >> +#include <linux/mtd/mtd.h> >> +#include <linux/mtd/nand.h> >> +#include <linux/mtd/partitions.h> >> +#include <linux/of.h> >> +#include <linux/of_mtd.h> >> +#include <linux/platform_device.h> >> + >> +#define DRIVER_NAME "arasan_nfc" >> +#define EVNT_TIMEOUT 1000 >> +#define STATUS_TIMEOUT 2000 >> + >> +#define PKT_OFST 0x00 >> +#define MEM_ADDR1_OFST 0x04 >> +#define MEM_ADDR2_OFST 0x08 >> +#define CMD_OFST 0x0C >> +#define PROG_OFST 0x10 >> +#define INTR_STS_EN_OFST 0x14 >> +#define INTR_SIG_EN_OFST 0x18 >> +#define INTR_STS_OFST 0x1C >> +#define READY_STS_OFST 0x20 >> +#define DMA_ADDR1_OFST 0x24 >> +#define FLASH_STS_OFST 0x28 >> +#define DATA_PORT_OFST 0x30 >> +#define ECC_OFST 0x34 >> +#define ECC_ERR_CNT_OFST 0x38 >> +#define ECC_SPR_CMD_OFST 0x3C >> +#define ECC_ERR_CNT_1BIT_OFST 0x40 >> +#define ECC_ERR_CNT_2BIT_OFST 0x44 >> +#define DMA_ADDR0_OFST 0x50 >> + >> +#define PKT_CNT_SHIFT 12 >> + >> +#define ECC_ENABLE BIT(31) >> +#define DMA_EN_MASK GENMASK(27, 26) >> +#define DMA_ENABLE 0x2 >> +#define DMA_EN_SHIFT 26 >> +#define PAGE_SIZE_MASK GENMASK(25, 23) >> +#define PAGE_SIZE_SHIFT 23 >> +#define PAGE_SIZE_512 0 >> +#define PAGE_SIZE_1K 5 >> +#define PAGE_SIZE_2K 1 >> +#define PAGE_SIZE_4K 2 >> +#define PAGE_SIZE_8K 3 >> +#define PAGE_SIZE_16K 4 >> +#define CMD2_SHIFT 8 >> +#define ADDR_CYCLES_SHIFT 28 >> + >> +#define XFER_COMPLETE BIT(2) >> +#define READ_READY BIT(1) >> +#define WRITE_READY BIT(0) >> +#define MBIT_ERROR BIT(3) >> +#define ERR_INTRPT BIT(4) >> + >> +#define PROG_PGRD BIT(0) >> +#define PROG_ERASE BIT(2) >> +#define PROG_STATUS BIT(3) >> +#define PROG_PGPROG BIT(4) >> +#define PROG_RDID BIT(6) >> +#define PROG_RDPARAM BIT(7) >> +#define PROG_RST BIT(8) >> + >> +#define ONFI_STATUS_FAIL BIT(0) >> +#define ONFI_STATUS_READY BIT(6) >> + >> +#define PG_ADDR_SHIFT 16 >> +#define BCH_MODE_SHIFT 25 >> +#define BCH_EN_SHIFT 27 >> +#define ECC_SIZE_SHIFT 16 >> + >> +#define MEM_ADDR_MASK GENMASK(7, 0) >> +#define BCH_MODE_MASK GENMASK(27, 25) >> + >> +#define CS_MASK GENMASK(31, 30) >> +#define CS_SHIFT 30 >> + >> +#define PAGE_ERR_CNT_MASK GENMASK(16, 8) >> +#define PKT_ERR_CNT_MASK GENMASK(7, 0) >> + >> +#define ONFI_ID_LEN 8 >> +#define TEMP_BUF_SIZE 512 >> + >> +/** >> + * struct anfc_ecc_matrix - Defines ecc information storage format >> + * @pagesize: Page size in bytes. >> + * @codeword_size: Code word size information. >> + * @eccbits: Number of ecc bits. >> + * @bch: Bch / Hamming mode enable/disable. >> + * @eccsize: Ecc size information. >> + */ >> +struct anfc_ecc_matrix { >> + u32 pagesize; >> + u32 codeword_size; >> + u8 eccbits; >> + u8 bch; >> + u16 eccsize; >> +}; >> + >> +static const struct anfc_ecc_matrix ecc_matrix[] = { >> + {512, 512, 1, 0, 0x3}, >> + {512, 512, 4, 1, 0x7}, >> + {512, 512, 8, 1, 0xD}, >> + /* 2K byte page */ >> + {2048, 512, 1, 0, 0xC}, >> + {2048, 512, 4, 1, 0x1A}, >> + {2048, 512, 8, 1, 0x34}, >> + {2048, 512, 12, 1, 0x4E}, >> + {2048, 1024, 24, 1, 0x54}, >> + /* 4K byte page */ >> + {4096, 512, 1, 0, 0x18}, >> + {4096, 512, 4, 1, 0x34}, >> + {4096, 512, 8, 1, 0x68}, >> + {4096, 512, 12, 1, 0x9C}, >> + {4096, 1024, 4, 1, 0xA8}, >> + /* 8K byte page */ >> + {8192, 512, 1, 0, 0x30}, >> + {8192, 512, 4, 1, 0x68}, >> + {8192, 512, 8, 1, 0xD0}, >> + {8192, 512, 12, 1, 0x138}, >> + {8192, 1024, 24, 1, 0x150}, >> + /* 16K byte page */ >> + {16384, 512, 1, 0, 0x60}, >> + {16384, 512, 4, 1, 0xD0}, >> + {16384, 512, 8, 1, 0x1A0}, >> + {16384, 512, 12, 1, 0x270}, >> + {16384, 1024, 24, 1, 0x2A0} >> +}; >> + >> +/** >> + * struct anfc - Defines the Arasan NAND flash driver instance >> + * @chip: NAND chip information structure. >> + * @mtd: MTD information structure. >> + * @parts: Pointer to the mtd_partition structure. >> + * @dev: Pointer to the device structure. >> + * @base: Virtual address of the NAND flash device. >> + * @curr_cmd: Current command issued. >> + * @dma: Dma enable/disable. >> + * @bch: Bch / Hamming mode enable/disable. >> + * @err: Error identifier. >> + * @iswriteoob: Identifies if oob write operation is required. >> + * @buf: Buffer used for read/write byte operations. >> + * @raddr_cycles: Row address cycle information. >> + * @caddr_cycles: Column address cycle information. >> + * @irq: irq number >> + * @page: Page address to be use for write oob operations. >> + * @pktsize: Packet size for read / write operation. >> + * @bufshift: Variable used for indexing buffer operation >> + * @rdintrmask: Interrupt mask value for read operation. >> + * @bufrdy: Completion event for buffer ready. >> + * @xfercomp: Completion event for transfer complete. >> + * @ecclayout: Ecc layout object >> + */ >> +struct anfc { >> + struct nand_chip chip; >> + struct mtd_info mtd; >> + struct mtd_partition *parts; > > ^^ This field is unused. yaa. i will remove > >> + struct device *dev; >> + >> + void __iomem *base; >> + int curr_cmd; >> + >> + bool dma; >> + bool bch; >> + bool err; >> + bool iswriteoob; >> + >> + u8 buf[TEMP_BUF_SIZE]; >> + >> + u16 raddr_cycles;) >> + u16 caddr_cycles; >> + >> + u32 irq; >> + u32 page; >> + u32 pktsize; >> + u32 bufshift; >> + u32 rdintrmask; >> + >> + struct completion bufrdy; >> + struct completion xfercomp; >> + struct nand_ecclayout ecclayout; >> +}; >> + >> +static u8 anfc_page(u32 pagesize) >> +{ >> + switch (pagesize) { >> + case 512: >> + return PAGE_SIZE_512; >> + case 2048: >> + return PAGE_SIZE_2K; >> + case 4096: >> + return PAGE_SIZE_4K; >> + case 8192: >> + return PAGE_SIZE_8K; >> + case 16384: >> + return PAGE_SIZE_16K; >> + case 1024: >> + return PAGE_SIZE_1K; >> + default: >> + break; >> + } >> + >> + return 0; >> +} >> + >> +static inline void anfc_enable_intrs(struct anfc *nfc, u32 val) >> +{ >> + writel(val, nfc->base + INTR_STS_EN_OFST); >> + writel(val, nfc->base + INTR_SIG_EN_OFST); >> +} >> + >> +static int anfc_wait_for_event(struct anfc *nfc, u32 event) >> +{ >> + struct completion *comp; >> + int ret; >> + >> + if (event == XFER_COMPLETE) >> + comp = &nfc->xfercomp; >> + else >> + comp = &nfc->bufrdy; >> + >> + ret = wait_for_completion_timeout(comp, msecs_to_jiffies(EVNT_TIMEOUT)); >> + >> + return ret; >> +} >> + >> +static inline void anfc_setpktszcnt(struct anfc *nfc, u32 pktsize, >> + u32 pktcount) >> +{ >> + writel(pktsize | (pktcount << PKT_CNT_SHIFT), nfc->base + PKT_OFST); >> +} >> + >> +static inline void anfc_set_eccsparecmd(struct anfc *nfc, u8 cmd1, u8 cmd2) >> +{ >> + writel(cmd1 | (cmd2 << CMD2_SHIFT) | >> + (nfc->caddr_cycles << ADDR_CYCLES_SHIFT), >> + nfc->base + ECC_SPR_CMD_OFST); >> +} >> + >> +static void anfc_setpagecoladdr(struct anfc *nfc, u32 page, u16 col) >> +{ >> + u32 val; >> + >> + writel(col | (page << PG_ADDR_SHIFT), nfc->base + MEM_ADDR1_OFST); >> + >> + val = readl(nfc->base + MEM_ADDR2_OFST); >> + val = (val & ~MEM_ADDR_MASK) | >> + ((page >> PG_ADDR_SHIFT) & MEM_ADDR_MASK); >> + writel(val, nfc->base + MEM_ADDR2_OFST); >> +} >> + >> +static void anfc_prepare_cmd(struct anfc *nfc, u8 cmd1, u8 cmd2, >> + u8 dmamode, u32 pagesize, u8 addrcycles) >> +{ >> + u32 regval; >> + >> + regval = cmd1 | (cmd2 << CMD2_SHIFT); >> + if (dmamode && nfc->dma) >> + regval |= DMA_ENABLE << DMA_EN_SHIFT; >> + if (addrcycles) >> + regval |= addrcycles << ADDR_CYCLES_SHIFT; >> + if (pagesize) >> + regval |= anfc_page(pagesize) << PAGE_SIZE_SHIFT; >> + writel(regval, nfc->base + CMD_OFST); >> +} >> + >> +static int anfc_device_ready(struct mtd_info *mtd, >> + struct nand_chip *chip) >> +{ >> + u8 status; >> + u32 timeout = STATUS_TIMEOUT; >> + >> + while (timeout--) { >> + chip->cmdfunc(mtd, NAND_CMD_STATUS, 0, 0); >> + status = chip->read_byte(mtd); >> + if (status & ONFI_STATUS_READY) { >> + if (status & ONFI_STATUS_FAIL) >> + return NAND_STATUS_FAIL; >> + return 0; >> + } >> + } > > No, we can't just do a busy-wait loop at an arbitrary count of 2000 > cycles. Can you do something that's interrupt-based? Or at least time > yourself with jiffies or something similar. I will Jiffies as there is no interrupt status for this. > >> + >> + pr_err("%s timed out\n", __func__); >> + return -ETIMEDOUT; >> +} >> + >> +static int anfc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, >> + int page) >> +{ >> + struct anfc *nfc = container_of(mtd, struct anfc, mtd); >> + >> + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); >> + if (nfc->dma) >> + nfc->rdintrmask = XFER_COMPLETE; >> + else >> + nfc->rdintrmask = READ_READY; >> + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); >> + >> + return 0; >> +} >> + >> +static int anfc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, >> + int page) >> +{ >> + struct anfc *nfc = container_of(mtd, struct anfc, mtd); >> + >> + nfc->iswriteoob = true; >> + chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); >> + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); >> + nfc->iswriteoob = false; >> + >> + return 0; >> +} >> + >> +static void anfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) >> +{ >> + u32 i, pktcount, buf_rd_cnt = 0, pktsize; >> + u32 *bufptr = (u32 *)buf; >> + struct anfc *nfc = container_of(mtd, struct anfc, mtd); >> + dma_addr_t paddr = 0; >> + >> + if (nfc->curr_cmd == NAND_CMD_READ0) { >> + pktsize = nfc->pktsize; >> + if (mtd->writesize % pktsize) >> + pktcount = mtd->writesize / pktsize + 1; >> + else >> + pktcount = mtd->writesize / pktsize; >> + } else { >> + pktsize = len; >> + pktcount = 1; >> + } >> + >> + anfc_setpktszcnt(nfc, pktsize, pktcount); >> + >> + if (nfc->dma) { >> + paddr = dma_map_single(nfc->dev, buf, len, DMA_FROM_DEVICE); >> + if (dma_mapping_error(nfc->dev, paddr)) { >> + dev_err(nfc->dev, "Read buffer mapping error"); >> + return; >> + } >> + writel(paddr, nfc->base + DMA_ADDR0_OFST); >> + writel(paddr >> 32, nfc->base + DMA_ADDR1_OFST); > > drivers/mtd/nand/arasan_nfc.c: In function ‘anfc_read_buf’: > drivers/mtd/nand/arasan_nfc.c:355:3: warning: right shift count >= width of type [enabled by default] > writel(paddr >> 32, nfc->base + DMA_ADDR1_OFST); > ^ > > How about using upper_32_bits() and lower_32_bits()? I just tried and it works. Thanks. > >> + anfc_enable_intrs(nfc, nfc->rdintrmask); >> + writel(PROG_PGRD, nfc->base + PROG_OFST); >> + anfc_wait_for_event(nfc, XFER_COMPLETE); >> + dma_unmap_single(nfc->dev, paddr, len, DMA_FROM_DEVICE); >> + return; >> + } >> + >> + anfc_enable_intrs(nfc, nfc->rdintrmask); >> + writel(PROG_PGRD, nfc->base + PROG_OFST); >> + >> + while (buf_rd_cnt < pktcount) { >> + >> + anfc_wait_for_event(nfc, READ_READY); >> + buf_rd_cnt++; >> + >> + if (buf_rd_cnt == pktcount) >> + anfc_enable_intrs(nfc, XFER_COMPLETE); >> + >> + for (i = 0; i < pktsize / 4; i++) >> + bufptr[i] = readl(nfc->base + DATA_PORT_OFST); >> + >> + bufptr += (pktsize / 4); >> + >> + if (buf_rd_cnt < pktcount) >> + anfc_enable_intrs(nfc, nfc->rdintrmask); >> + } >> + >> + anfc_wait_for_event(nfc, XFER_COMPLETE); >> +} >> + >> +static void anfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) >> +{ >> + u32 buf_wr_cnt = 0, pktcount = 1, i, pktsize; >> + u32 *bufptr = (u32 *)buf; >> + struct anfc *nfc = container_of(mtd, struct anfc, mtd); >> + dma_addr_t paddr = 0; >> + >> + if (nfc->iswriteoob) { >> + pktsize = len; >> + pktcount = 1; >> + } else { >> + pktsize = nfc->pktsize; >> + pktcount = mtd->writesize / pktsize; >> + } >> + >> + anfc_setpktszcnt(nfc, pktsize, pktcount); >> + >> + if (nfc->dma) { >> + paddr = dma_map_single(nfc->dev, (void *)buf, len, >> + DMA_TO_DEVICE); >> + if (dma_mapping_error(nfc->dev, paddr)) { >> + dev_err(nfc->dev, "Write buffer mapping error"); >> + return; >> + } >> + writel(paddr, nfc->base + DMA_ADDR0_OFST); >> + writel(paddr >> 32, nfc->base + DMA_ADDR1_OFST); > > Same problem as in read_buf(). > >> + anfc_enable_intrs(nfc, XFER_COMPLETE); >> + writel(PROG_PGPROG, nfc->base + PROG_OFST); >> + anfc_wait_for_event(nfc, XFER_COMPLETE); >> + dma_unmap_single(nfc->dev, paddr, len, DMA_TO_DEVICE); >> + return; >> + } >> + >> + anfc_enable_intrs(nfc, WRITE_READY); >> + writel(PROG_PGPROG, nfc->base + PROG_OFST); >> + >> + while (buf_wr_cnt < pktcount) { >> + anfc_wait_for_event(nfc, WRITE_READY); >> + >> + buf_wr_cnt++; >> + if (buf_wr_cnt == pktcount) >> + anfc_enable_intrs(nfc, XFER_COMPLETE); >> + >> + for (i = 0; i < (pktsize / 4); i++) >> + writel(bufptr[i], nfc->base + DATA_PORT_OFST); >> + >> + bufptr += (pktsize / 4); >> + >> + if (buf_wr_cnt < pktcount) >> + anfc_enable_intrs(nfc, WRITE_READY); >> + } >> + >> + anfc_wait_for_event(nfc, XFER_COMPLETE); >> +} >> + >> +static int anfc_read_page_hwecc(struct mtd_info *mtd, >> + struct nand_chip *chip, uint8_t *buf, >> + int oob_required, int page) >> +{ >> + u32 val; >> + struct anfc *nfc = container_of(mtd, struct anfc, mtd); >> + >> + anfc_set_eccsparecmd(nfc, NAND_CMD_RNDOUT, NAND_CMD_RNDOUTSTART); >> + >> + val = readl(nfc->base + CMD_OFST); >> + val = val | ECC_ENABLE; >> + writel(val, nfc->base + CMD_OFST); >> + >> + if (nfc->dma) >> + nfc->rdintrmask = XFER_COMPLETE; >> + else >> + nfc->rdintrmask = READ_READY; >> + >> + if (!nfc->bch) >> + nfc->rdintrmask = MBIT_ERROR; >> + >> + chip->read_buf(mtd, buf, mtd->writesize); >> + >> + val = readl(nfc->base + ECC_ERR_CNT_OFST); >> + if (nfc->bch) { >> + mtd->ecc_stats.corrected += val & PAGE_ERR_CNT_MASK; >> + } else { >> + val = readl(nfc->base + ECC_ERR_CNT_1BIT_OFST); >> + mtd->ecc_stats.corrected += val; >> + val = readl(nfc->base + ECC_ERR_CNT_2BIT_OFST); >> + mtd->ecc_stats.failed += val; >> + /* Clear ecc error count register 1Bit, 2Bit */ >> + writel(0x0, nfc->base + ECC_ERR_CNT_1BIT_OFST); >> + writel(0x0, nfc->base + ECC_ERR_CNT_2BIT_OFST); >> + } >> + nfc->err = false; >> + >> + if (oob_required) >> + chip->ecc.read_oob(mtd, chip, page); >> + >> + return 0; >> +} >> + >> +static int anfc_write_page_hwecc(struct mtd_info *mtd, >> + struct nand_chip *chip, const uint8_t *buf, >> + int oob_required) >> +{ >> + u32 val, i; >> + struct anfc *nfc = container_of(mtd, struct anfc, mtd); >> + uint8_t *ecc_calc = chip->buffers->ecccalc; >> + uint32_t *eccpos = chip->ecc.layout->eccpos; >> + >> + anfc_set_eccsparecmd(nfc, NAND_CMD_RNDIN, 0); >> + >> + val = readl(nfc->base + CMD_OFST); >> + val = val | ECC_ENABLE; >> + writel(val, nfc->base + CMD_OFST); >> + >> + chip->write_buf(mtd, buf, mtd->writesize); >> + >> + if (oob_required) { >> + anfc_device_ready(mtd, chip); >> + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, nfc->page); >> + if (nfc->dma) >> + nfc->rdintrmask = XFER_COMPLETE; >> + else >> + nfc->rdintrmask = READ_READY; >> + chip->read_buf(mtd, ecc_calc, mtd->oobsize); >> + for (i = 0; i < chip->ecc.total; i++) >> + chip->oob_poi[eccpos[i]] = ecc_calc[eccpos[i]]; >> + chip->ecc.write_oob(mtd, chip, nfc->page); >> + } >> + >> + return 0; >> +} >> + >> +static u8 anfc_read_byte(struct mtd_info *mtd) >> +{ >> + struct anfc *nfc = container_of(mtd, struct anfc, mtd); >> + >> + return nfc->buf[nfc->bufshift++]; >> +} >> + >> +static void anfc_readfifo(struct anfc *nfc, u32 prog, u32 size) >> +{ >> + u32 i, *bufptr = (u32 *)&nfc->buf[0]; >> + >> + anfc_enable_intrs(nfc, READ_READY); >> + >> + writel(prog, nfc->base + PROG_OFST); >> + anfc_wait_for_event(nfc, READ_READY); >> + >> + anfc_enable_intrs(nfc, XFER_COMPLETE); >> + >> + for (i = 0; i < size / 4; i++) >> + bufptr[i] = readl(nfc->base + DATA_PORT_OFST); >> + >> + anfc_wait_for_event(nfc, XFER_COMPLETE); >> +} >> + >> +static int anfc_ecc_init(struct mtd_info *mtd, >> + struct nand_ecc_ctrl *ecc) >> +{ >> + u32 oob_index, i, ecc_addr, regval, bchmode = 0; >> + struct nand_chip *nand_chip = mtd->priv; >> + struct anfc *nfc = container_of(mtd, struct anfc, mtd); >> + int found = -1; >> + >> + nand_chip->ecc.mode = NAND_ECC_HW; >> + nand_chip->ecc.read_page = anfc_read_page_hwecc; >> + nand_chip->ecc.write_page = anfc_write_page_hwecc; >> + nand_chip->ecc.write_oob = anfc_write_oob; >> + nand_chip->ecc.read_oob = anfc_read_oob; >> + >> + for (i = 0; i < sizeof(ecc_matrix) / sizeof(struct anfc_ecc_matrix); >> + i++) { >> + if ((ecc_matrix[i].pagesize == mtd->writesize) && >> + (ecc_matrix[i].codeword_size >= nand_chip->ecc_step_ds)) { >> + if (ecc_matrix[i].eccbits >= >> + nand_chip->ecc_strength_ds) { >> + found = i; >> + break; >> + } >> + found = i; >> + } >> + } >> + >> + if (found < 0) { >> + dev_err(nfc->dev, "ECC scheme not supported"); >> + return 1; >> + } >> + if (ecc_matrix[found].bch) { >> + switch (ecc_matrix[found].eccbits) { >> + case 12: >> + bchmode = 0x1; >> + break; >> + case 8: >> + bchmode = 0x2; >> + break; >> + case 4: >> + bchmode = 0x3; >> + break; >> + case 24: >> + bchmode = 0x4; >> + break; >> + default: >> + bchmode = 0x0; >> + } >> + } >> + >> + nand_chip->ecc.strength = ecc_matrix[found].eccbits; >> + nand_chip->ecc.size = ecc_matrix[found].codeword_size; >> + nand_chip->ecc.steps = ecc_matrix[found].pagesize / >> + ecc_matrix[found].codeword_size; >> + nand_chip->ecc.bytes = ecc_matrix[found].eccsize / >> + nand_chip->ecc.steps; >> + nfc->ecclayout.eccbytes = ecc_matrix[found].eccsize; >> + nfc->bch = ecc_matrix[found].bch; >> + oob_index = nand_chip->onfi_params.spare_bytes_per_page - >> + nfc->ecclayout.eccbytes; > > sparse doesn't like this: > > drivers/mtd/nand/arasan_nfc.c:599:43: warning: restricted __le16 degrades to integer [sparse] > > You need to use __le16_to_cpu() when accessing ONFI params. But really, > you should be using mtd->oobsize, not onfi_params Correct. I can use mtd->oobsize. > >> + ecc_addr = mtd->writesize + oob_index; >> + >> + for (i = 0; i < nand_chip->ecc.size; i++) >> + nfc->ecclayout.eccpos[i] = oob_index + i; >> + >> + nfc->ecclayout.oobfree->offset = 2; >> + nfc->ecclayout.oobfree->length = oob_index - >> + nfc->ecclayout.oobfree->offset; >> + >> + nand_chip->ecc.layout = &(nfc->ecclayout); >> + regval = ecc_addr | (ecc_matrix[found].eccsize << ECC_SIZE_SHIFT) | >> + (ecc_matrix[found].bch << BCH_EN_SHIFT); >> + writel(regval, nfc->base + ECC_OFST); >> + >> + regval = readl(nfc->base + MEM_ADDR2_OFST); >> + regval = (regval & ~(BCH_MODE_MASK)) | (bchmode << BCH_MODE_SHIFT); >> + writel(regval, nfc->base + MEM_ADDR2_OFST); >> + >> + if (nand_chip->ecc_step_ds >= 1024) >> + nfc->pktsize = 1024; >> + else >> + nfc->pktsize = 512; >> + >> + return 0; >> +} >> + >> +static void anfc_cmd_function(struct mtd_info *mtd, >> + unsigned int cmd, int column, int page_addr) >> +{ >> + struct anfc *nfc = container_of(mtd, struct anfc, mtd); >> + bool wait = false, read = false; >> + u32 addrcycles, prog; >> + u32 *bufptr = (u32 *)&nfc->buf[0]; >> + >> + nfc->bufshift = 0; >> + nfc->curr_cmd = cmd; >> + >> + if (page_addr == -1) >> + page_addr = 0; >> + if (column == -1) >> + column = 0; >> + >> + switch (cmd) { >> + case NAND_CMD_RESET: >> + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0); >> + prog = PROG_RST; >> + wait = true; >> + break; >> + case NAND_CMD_SEQIN: >> + addrcycles = nfc->raddr_cycles + nfc->caddr_cycles; >> + nfc->page = page_addr; >> + anfc_prepare_cmd(nfc, cmd, NAND_CMD_PAGEPROG, 1, >> + mtd->writesize, addrcycles); >> + anfc_setpagecoladdr(nfc, page_addr, column); >> + break; >> + case NAND_CMD_READOOB: >> + column += mtd->writesize; >> + case NAND_CMD_READ0: >> + case NAND_CMD_READ1: >> + addrcycles = nfc->raddr_cycles + nfc->caddr_cycles; >> + anfc_prepare_cmd(nfc, NAND_CMD_READ0, NAND_CMD_READSTART, 1, >> + mtd->writesize, addrcycles); >> + anfc_setpagecoladdr(nfc, page_addr, column); >> + break; >> + case NAND_CMD_RNDOUT: >> + anfc_prepare_cmd(nfc, cmd, NAND_CMD_RNDOUTSTART, 1, >> + mtd->writesize, 2); >> + anfc_setpagecoladdr(nfc, page_addr, column); >> + if (nfc->dma) >> + nfc->rdintrmask = XFER_COMPLETE; >> + else >> + nfc->rdintrmask = READ_READY; >> + break; >> + case NAND_CMD_PARAM: >> + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1); >> + anfc_setpagecoladdr(nfc, page_addr, column); >> + anfc_setpktszcnt(nfc, sizeof(struct nand_onfi_params), 1); >> + anfc_readfifo(nfc, PROG_RDPARAM, >> + sizeof(struct nand_onfi_params)); >> + break; >> + case NAND_CMD_READID: >> + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 1); >> + anfc_setpagecoladdr(nfc, page_addr, column); >> + anfc_setpktszcnt(nfc, ONFI_ID_LEN, 1); >> + anfc_readfifo(nfc, PROG_RDID, ONFI_ID_LEN); >> + break; >> + case NAND_CMD_ERASE1: >> + addrcycles = nfc->raddr_cycles; >> + prog = PROG_ERASE; >> + anfc_prepare_cmd(nfc, cmd, NAND_CMD_ERASE2, 0, 0, addrcycles); >> + column = page_addr & 0xffff; >> + page_addr = (page_addr >> PG_ADDR_SHIFT) & 0xffff; >> + anfc_setpagecoladdr(nfc, page_addr, column); >> + wait = true; >> + break; >> + case NAND_CMD_STATUS: >> + anfc_prepare_cmd(nfc, cmd, 0, 0, 0, 0); >> + anfc_setpktszcnt(nfc, 1, 1); >> + anfc_setpagecoladdr(nfc, page_addr, column); >> + prog = PROG_STATUS; >> + wait = read = true; >> + break; >> + default: >> + return; >> + } >> + >> + if (wait) { >> + anfc_enable_intrs(nfc, XFER_COMPLETE); >> + writel(prog, nfc->base + PROG_OFST); >> + anfc_wait_for_event(nfc, XFER_COMPLETE); >> + } >> + >> + if (read) >> + bufptr[0] = readl(nfc->base + FLASH_STS_OFST); >> +} >> + >> +static void anfc_select_chip(struct mtd_info *mtd, int num) >> +{ >> + u32 val; >> + struct anfc *nfc = container_of(mtd, struct anfc, mtd); >> + >> + if (num == -1) >> + return; >> + >> + val = readl(nfc->base + MEM_ADDR2_OFST); >> + val = (val & ~(CS_MASK)) | (num << CS_SHIFT); >> + writel(val, nfc->base + MEM_ADDR2_OFST); >> +} >> + >> +static irqreturn_t anfc_irq_handler(int irq, void *ptr) >> +{ >> + struct anfc *nfc = ptr; >> + u32 regval = 0, status; >> + >> + status = readl(nfc->base + INTR_STS_OFST); >> + if (status & XFER_COMPLETE) { >> + complete(&nfc->xfercomp); >> + regval |= XFER_COMPLETE; >> + } >> + >> + if (status & READ_READY) { >> + complete(&nfc->bufrdy); >> + regval |= READ_READY; >> + } >> + >> + if (status & WRITE_READY) { >> + complete(&nfc->bufrdy); >> + regval |= WRITE_READY; >> + } >> + >> + if (status & MBIT_ERROR) { >> + nfc->err = true; >> + complete(&nfc->bufrdy); >> + regval |= MBIT_ERROR; >> + } >> + >> + if (regval) { >> + writel(regval, nfc->base + INTR_STS_OFST); >> + writel(0, nfc->base + INTR_STS_EN_OFST); >> + writel(0, nfc->base + INTR_SIG_EN_OFST); >> + >> + return IRQ_HANDLED; >> + } >> + >> + return IRQ_NONE; >> +} >> + >> +static int anfc_probe(struct platform_device *pdev) >> +{ >> + struct anfc *nfc; >> + struct mtd_info *mtd; >> + struct nand_chip *nand_chip; >> + struct resource *res; >> + struct mtd_part_parser_data ppdata; >> + int err; >> + >> + nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL); >> + if (!nfc) >> + return -ENOMEM; >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + nfc->base = devm_ioremap_resource(&pdev->dev, res); >> + if (IS_ERR(nfc->base)) >> + return PTR_ERR(nfc->base); >> + >> + mtd = &nfc->mtd; >> + nand_chip = &nfc->chip; >> + nand_chip->priv = nfc; >> + mtd->priv = nand_chip; >> + mtd->owner = THIS_MODULE; >> + mtd->name = DRIVER_NAME; >> + nfc->dev = &pdev->dev; > > You should set mtd->dev.parent too. Ok. > >> + >> + nand_chip->cmdfunc = anfc_cmd_function; >> + nand_chip->waitfunc = anfc_device_ready; >> + nand_chip->chip_delay = 30; >> + nand_chip->read_buf = anfc_read_buf; >> + nand_chip->write_buf = anfc_write_buf; >> + nand_chip->read_byte = anfc_read_byte; >> + nand_chip->bbt_options = NAND_BBT_USE_FLASH; >> + nand_chip->select_chip = anfc_select_chip; >> + mtd->size = nand_chip->chipsize; > > This line looks superfluous. chipsize isn't even set at this point. I will remove this. > >> + nfc->dma = of_property_read_bool(pdev->dev.of_node, >> + "arasan,has-mdma"); >> + platform_set_drvdata(pdev, nfc); >> + init_completion(&nfc->bufrdy); >> + init_completion(&nfc->xfercomp); >> + nfc->irq = platform_get_irq(pdev, 0); > > Check for errors? I thought devm_request_irq will return error if an invalid irq number is passed. i will cross check once again and add error check if required. > >> + err = devm_request_irq(&pdev->dev, nfc->irq, anfc_irq_handler, >> + 0, "arasannfc", nfc); >> + if (err) >> + return err; >> + >> + if (nand_scan_ident(mtd, 1, NULL)) { >> + dev_err(&pdev->dev, "nand_scan_ident for NAND failed\n"); >> + return -ENXIO; >> + } >> + nfc->raddr_cycles = nand_chip->onfi_params.addr_cycles & 0xF; >> + nfc->caddr_cycles = (nand_chip->onfi_params.addr_cycles >> 4) & 0xF; > > Do you *have* to get this from ONFI? What if someone uses non-ONFI > flash? You should at least check if this is an ONFI flash before using > these param values. Yes, i have to get this from onfi because though most of the flash devices typically using 5 address cycles (row + col) we have seen few spansion devices expecting 4 address cycles. probably if (nand_chip->onfi_version) // or add an equivalent API in mtd/nand.h get the address cycles info from onfi else use default 5 address cycles. Please let me know is it the correct implementation. > >> + >> + if (anfc_ecc_init(mtd, &nand_chip->ecc)) >> + return -ENXIO; >> + >> + if (nand_scan_tail(mtd)) { >> + dev_err(&pdev->dev, "nand_scan_tail for NAND failed\n"); >> + return -ENXIO; >> + } >> + >> + ppdata.of_node = pdev->dev.of_node; >> + >> + mtd_device_parse_register(&nfc->mtd, NULL, &ppdata, NULL, 0); >> + return 0; > > You're ignoring the return value from mtd_device_parse_register(). How > about: Ok. Thanks Brian for the review. Regards, Punnaiah > > return mtd_device_parse_register(&nfc->mtd, NULL, &ppdata, NULL, 0); > >> +} >> + >> +static int anfc_remove(struct platform_device *pdev) >> +{ >> + struct anfc *nfc = platform_get_drvdata(pdev); >> + >> + nand_release(&nfc->mtd); >> + >> + return 0; >> +} >> + >> +static const struct of_device_id anfc_ids[] = { >> + { .compatible = "arasan,nfc-v3p10" }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, anfc_ids); >> + >> +static struct platform_driver anfc_driver = { >> + .driver = { >> + .name = DRIVER_NAME, >> + .of_match_table = anfc_ids, >> + }, >> + .probe = anfc_probe, >> + .remove = anfc_remove, >> +}; >> +module_platform_driver(anfc_driver); >> + >> +MODULE_LICENSE("GPL"); >> +MODULE_AUTHOR("Xilinx, Inc"); >> +MODULE_DESCRIPTION("Arasan NAND Flash Controller Driver"); > > Brian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mtd/arasan_nfc.txt b/Documentation/devicetree/bindings/mtd/arasan_nfc.txt new file mode 100644 index 0000000..7815120 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/arasan_nfc.txt @@ -0,0 +1,27 @@ +Arasan Nand Flash Controller with ONFI 3.1 support + +Required properties: +- compatible: Should be "arasan,nfc-v3p10" +- reg: Memory map for module access +- interrupt-parent: Interrupt controller the interrupt is routed through +- interrupts: Should contain the interrupt for the device + +Optional properties: +- arasan,has-mdma: Boolean to support dma transfer for nand read/write. + +for nand partition information please refer the below file +Documentation/devicetree/bindings/mtd/partition.txt + +Example: + nand0: nand@ff100000 { + compatible = "arasan,nfc-v3p10" + reg = <0x0 0xff100000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 14 4>; + arasan,has-mdma; + partition@0 { + label = "filesystem"; + reg = <0x0 0x0 0x1000000>; + }; + (...) + };
This patch adds the dts binding document for arasan nand flash controller. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> --- Changes in v2: - None. --- .../devicetree/bindings/mtd/arasan_nfc.txt | 27 ++++++++++++++++++++ 1 files changed, 27 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/arasan_nfc.txt