| Message ID | 1431580121-24726-3-git-send-email-tharvey@gateworks.com |
|---|---|
| State | Changes Requested |
| Delegated to: | Stefano Babic |
| Headers | show |
On 05/14/2015 08:08 AM, Tim Harvey wrote: > Display the max CPU frequency as well as the current running CPU frequency > if the max CPU frequency is available and differs from the current CPU > frequency. > > Before: > CPU: Freescale i.MX6Q rev1.2 at 792 MHz > > After - using an 800MHz IMX6DL (running at its max) > CPU: Freescale i.MX6DL rev1.1 at 792 MHz > > After - using a 1GHz IMX6Q (not running at its max): > CPU: Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz) > > Signed-off-by: Tim Harvey <tharvey@gateworks.com> > --- > v2: > - split out from patch that obtains the max cpu freq > - add before/after example and more description of change > > Signed-off-by: Tim Harvey <tharvey@gateworks.com> > --- > arch/arm/imx-common/cpu.c | 16 +++++++++++++++- > 1 file changed, 15 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c > index 067d08f..6b20482 100644 > --- a/arch/arm/imx-common/cpu.c > +++ b/arch/arm/imx-common/cpu.c > @@ -142,7 +142,7 @@ const char *get_imx_type(u32 imxtype) > > int print_cpuinfo(void) > { > - u32 cpurev; > + u32 cpurev, max_freq; > > #if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) > struct udevice *thermal_dev; > @@ -151,11 +151,25 @@ int print_cpuinfo(void) > > cpurev = get_cpu_rev(); > > +#if defined(CONFIG_MX6) > + printf("CPU: Freescale i.MX%s rev%d.%d", > + get_imx_type((cpurev & 0xFF000) >> 12), > + (cpurev & 0x000F0) >> 4, > + (cpurev & 0x0000F) >> 0); > + max_freq = get_cpu_speed_grade_hz(); > + if (!max_freq || max_freq == mxc_get_clock(MXC_ARM_CLK)) { > + printf(" at %dMHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000); > + } else { > + printf(" %d MHz (running at %d MHz)\n", max_freq / 1000000, > + mxc_get_clock(MXC_ARM_CLK) / 1000000); > + } > +#else > printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n", > get_imx_type((cpurev & 0xFF000) >> 12), > (cpurev & 0x000F0) >> 4, > (cpurev & 0x0000F) >> 0, > mxc_get_clock(MXC_ARM_CLK) / 1000000); > +#endif > > #if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) > ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev); > Tested-by: Nikolay Dimitrov <picmaster@mail.bg> Regards, Nikolay
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index 067d08f..6b20482 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -142,7 +142,7 @@ const char *get_imx_type(u32 imxtype) int print_cpuinfo(void) { - u32 cpurev; + u32 cpurev, max_freq; #if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) struct udevice *thermal_dev; @@ -151,11 +151,25 @@ int print_cpuinfo(void) cpurev = get_cpu_rev(); +#if defined(CONFIG_MX6) + printf("CPU: Freescale i.MX%s rev%d.%d", + get_imx_type((cpurev & 0xFF000) >> 12), + (cpurev & 0x000F0) >> 4, + (cpurev & 0x0000F) >> 0); + max_freq = get_cpu_speed_grade_hz(); + if (!max_freq || max_freq == mxc_get_clock(MXC_ARM_CLK)) { + printf(" at %dMHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000); + } else { + printf(" %d MHz (running at %d MHz)\n", max_freq / 1000000, + mxc_get_clock(MXC_ARM_CLK) / 1000000); + } +#else printf("CPU: Freescale i.MX%s rev%d.%d at %d MHz\n", get_imx_type((cpurev & 0xFF000) >> 12), (cpurev & 0x000F0) >> 4, (cpurev & 0x0000F) >> 0, mxc_get_clock(MXC_ARM_CLK) / 1000000); +#endif #if defined(CONFIG_MX6) && defined(CONFIG_IMX6_THERMAL) ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev);