[OpenWrt-Devel] ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile Router

Message ID	1431521731-7594-1-git-send-email-atliang@gmail.com
State	Accepted
Headers	show Return-Path: <openwrt-devel-bounces@lists.openwrt.org> rate: -8.5 From: Tai-hwa Liang <atliang@gmail.com> To: openwrt-devel@lists.openwrt.org Date: Wed, 13 May 2015 20:55:31 +0800 Message-Id: <1431521731-7594-1-git-send-email-atliang@gmail.com> Subject: [OpenWrt-Devel] [PATCH] ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile Router Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Errors-To: openwrt-devel-bounces@lists.openwrt.org Sender: "openwrt-devel" <openwrt-devel-bounces@lists.openwrt.org>

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 56ba3b7..f5974f2 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -141,6 +141,10 @@ case $board in mpr-a2) set_wifi_led "hame:blue:system" ;; + mr-102n) + set_wifi_led "mr-102n:green:wlan" + set_usb_led "mr-102n:green:usb" + ;; mzk-w300nh2) set_wifi_led "mzkw300nh2:amber:wlan" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 24e1ba8..a84ee39 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -61,7 +61,8 @@ ramips_setup_interfaces() ;; 3g-6200nl | \ - mlw221) + mlw221 | \ + mr-102n) ucidef_set_interface_lan "eth0.2" ;; mlwg2) diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 5301593..5c860a1 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -101,6 +101,9 @@ get_status_led() { mpr-a2) status_led="hame:red:power" ;; + mr-102n) + status_led="mr-102n:amber:status" + ;; nbg-419n) status_led="nbg-419n:green:power" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 616f4a1..02fb426 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -85,6 +85,9 @@ ramips_board_detect() { *"Aztech HW550-3G") name="hw550-3g" ;; + *"AXIMCom MR-102N") + name="mr-102n" + ;; *"Buffalo WSR-600DHP") name="wsr-600" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 17b456b..ee81803 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -66,6 +66,7 @@ platform_check_image() { mofi3500-3gn | \ mpr-a1 | \ mpr-a2 | \ + mr-102n | \ mzk-w300nh2 | \ nbg-419n | \ nw718 | \ diff --git a/target/linux/ramips/dts/MR-102N.dts b/target/linux/ramips/dts/MR-102N.dts new file mode 100644 index 0000000..c2a6e24 --- /dev/null +++ b/target/linux/ramips/dts/MR-102N.dts @@ -0,0 +1,111 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "MR-102N", "ralink,rt3052-soc"; + model = "AXIMCom MR-102N"; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x790000>; + }; + + partition@7e0000 { + label = "nvram"; + reg = <0x7e0000 0x10000>; + }; + + partition@7f0000 { + label = "nvram_backup"; + reg = <0x7f0000 0x10000>; + }; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + }; + + esw@10110000 { + status = "okay"; + #ralink,portmap = <0x3e>; + ralink,portmap = <0x2f>; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + usb { + label = "mr-102n:green:usb"; + gpios = <&gpio0 8 1>; + }; + status { + label = "mr-102n:amber:status"; + gpios = <&gpio0 9 1>; + }; + wlan { + label = "mr-102n:green:wlan"; + gpios = <&gpio0 11 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 13 1>; + linux,code = <0x198>; + }; + wps { + label = "wps"; + gpios = <&gpio0 18 1>; + linux,code = <0x211>; + }; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index e6b5112..83e0b10 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -554,6 +554,8 @@ Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi35 # Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI Image/Build/Profile/3G150B=$(call BuildFirmware/Default4M/$(1),$(1),3g150b,3G150B,Linux Kernel Image) +Image/Build/Profile/MR102N=$(call BuildFirmware/Default8M/$(1),$(1),mr-102n,MR-102N) + Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image) Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image) @@ -724,6 +726,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/M3,$(1)) $(call Image/Build/Profile/M4,$(1)) $(call Image/Build/Profile/MOFI3500-3GN,$(1)) + $(call Image/Build/Profile/MR102N,$(1)) $(call Image/Build/Profile/MPRA1,$(1)) $(call Image/Build/Profile/MPRA2,$(1)) $(call Image/Build/Profile/MZKW300NH2,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/aximcom.mk b/target/linux/ramips/rt305x/profiles/aximcom.mk new file mode 100644 index 0000000..eb305af --- /dev/null +++ b/target/linux/ramips/rt305x/profiles/aximcom.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2012 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/MR102N + NAME:=AXIMCom MR-102N + PACKAGES:=kmod-usb-core kmod-usb-dwc2 kmod-ledtrig-usbdev +endef + +define Profile/MR102N/Description + Package set for AXIMCom MR-102N +endef + +$(eval $(call Profile,MR102N))

[OpenWrt-Devel] ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile Router

Commit Message

Patch