Message ID | 20150512191710.GA2260@fifteen |
---|---|
State | Accepted |
Delegated to: | Tom Rini |
Headers | show |
On Tue, May 12, 2015 at 10:17:10PM +0300, Evgeniy Dushistov wrote: > DM3730 CPU used on beagleboard-xm doesn't have any gpio > multiplexed with wait0 pin, > but gpio_63 multiplexed with wait1, so it looks like typo. > At current form it has no sense, > because of wait0 have no function "4". > > Signed-off-by: Evgneiy A. Dushistov <dushistov at mail.ru> Applied to u-boot/master, thanks!
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index 6dd2ffe..86bd6e9 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -375,7 +375,7 @@ const omap3_sysinfo sysinfo = { #define MUX_BEAGLE_XM() \ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | EN | M4)) /*GPIO_56*/\ - MUX_VAL(CP(GPMC_WAIT0), (IDIS | PTU | EN | M4)) /*GPIO_63*/\ + MUX_VAL(CP(GPMC_WAIT1), (IDIS | PTU | EN | M4)) /*GPIO_63*/\ MUX_VAL(CP(MMC1_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_129*/\ MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\
DM3730 CPU used on beagleboard-xm doesn't have any gpio multiplexed with wait0 pin, but gpio_63 multiplexed with wait1, so it looks like typo. At current form it has no sense, because of wait0 have no function "4". Signed-off-by: Evgneiy A. Dushistov <dushistov@mail.ru> --- board/ti/beagle/beagle.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)