@@ -456,6 +456,52 @@ static int bcm_sysport_set_wol(struct net_device *dev,
return 0;
}
+static int bcm_sysport_get_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ec)
+{
+ struct bcm_sysport_priv *priv = netdev_priv(dev);
+ u32 reg;
+
+ reg = tdma_readl(priv, TDMA_DESC_RING_INTR_CONTROL(0));
+
+ ec->tx_coalesce_usecs = (reg >> RING_TIMEOUT_SHIFT) * 8192 / 1000;
+ ec->tx_max_coalesced_frames = reg & RING_INTR_THRESH_MASK;
+
+ return 0;
+}
+
+static int bcm_sysport_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ec)
+{
+ struct bcm_sysport_priv *priv = netdev_priv(dev);
+ unsigned int i;
+ u32 reg;
+
+ /* Base system clock is 125Mhz, TDMA timeout is this reference clock
+ * divided by 1024, which yield roughly 8.192 us, our maximum value
+ * has to fit in the RING_TIMEOUT_MASK (16 bits).
+ */
+ if (ec->tx_max_coalesced_frames > RING_INTR_THRESH_MASK ||
+ ec->tx_coalesce_usecs > (RING_TIMEOUT_MASK * 8) + 1)
+ return -EINVAL;
+
+ if (ec->tx_coalesce_usecs == 0 &&
+ ec->tx_max_coalesced_frames == 0)
+ return -EINVAL;
+
+ for (i = 0; i < dev->num_tx_queues; i++) {
+ reg = tdma_readl(priv, TDMA_DESC_RING_INTR_CONTROL(i));
+ reg &= ~(RING_INTR_THRESH_MASK |
+ RING_TIMEOUT_MASK << RING_TIMEOUT_SHIFT);
+ reg |= ec->tx_max_coalesced_frames;
+ reg |= DIV_ROUND_UP(ec->tx_coalesce_usecs * 1000, 8192) <<
+ RING_TIMEOUT_SHIFT;
+ tdma_writel(priv, reg, TDMA_DESC_RING_INTR_CONTROL(i));
+ }
+
+ return 0;
+}
+
static void bcm_sysport_free_cb(struct bcm_sysport_cb *cb)
{
dev_kfree_skb_any(cb->skb);
@@ -1641,6 +1687,8 @@ static struct ethtool_ops bcm_sysport_ethtool_ops = {
.get_sset_count = bcm_sysport_get_sset_count,
.get_wol = bcm_sysport_get_wol,
.set_wol = bcm_sysport_set_wol,
+ .get_coalesce = bcm_sysport_get_coalesce,
+ .set_coalesce = bcm_sysport_set_coalesce,
};
static const struct net_device_ops bcm_sysport_netdev_ops = {
Add the ability to configure both 'tx-frames' which controls how many frames are doing to trigger a single interrupt and 'tx-usecs' which dictates how long to wait before an interrupt should be services. Since our timer resolution is close to 8.192 us, we round up to the nearest value the 'tx-usecs' timeout value. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/ethernet/broadcom/bcmsysport.c | 48 ++++++++++++++++++++++++++++++ 1 file changed, 48 insertions(+)