diff mbox

[U-Boot,U-Boot,v2,11/17] dts: zynq: Add zynq spi controller nodes

Message ID 1431270957-6901-12-git-send-email-jteki@openedev.com
State Superseded
Delegated to: Jagannadha Sutradharudu Teki
Headers show

Commit Message

Jagan Teki May 10, 2015, 3:15 p.m. UTC 
This patch adds zynq spi controller nodes in zynq-7000.dtsi.

Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
---
 arch/arm/dts/zynq-7000.dtsi               | 24 ++++++++++++++++++++++++
 doc/device-tree-bindings/spi/spi-zynq.txt | 27 +++++++++++++++++++++++++++
 2 files changed, 51 insertions(+)
 create mode 100644 doc/device-tree-bindings/spi/spi-zynq.txt
diff mbox

Patch

diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 2d076f1..f66f8dc 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -109,6 +109,30 @@ 
 			interrupts = <0 50 4>;
 		};
 
+		spi0: spi@e0006000 {
+			compatible = "xlnx,zynq-spi";
+			reg = <0xe0006000 0x1000>;
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 26 4>;
+			clocks = <&clkc 25>, <&clkc 34>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@e0007000 {
+			compatible = "xlnx,zynq-spi";
+			reg = <0xe0007000 0x1000>;
+			status = "disabled";
+			interrupt-parent = <&intc>;
+			interrupts = <0 49 4>;
+			clocks = <&clkc 26>, <&clkc 35>;
+			clock-names = "ref_clk", "pclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		gem0: ethernet@e000b000 {
 			compatible = "cdns,gem";
 			reg = <0xe000b000 0x4000>;
diff --git a/doc/device-tree-bindings/spi/spi-zynq.txt b/doc/device-tree-bindings/spi/spi-zynq.txt
new file mode 100644
index 0000000..a7c2757
--- /dev/null
+++ b/doc/device-tree-bindings/spi/spi-zynq.txt
@@ -0,0 +1,27 @@ 
+Zynq SPI controller Device Tree Bindings
+----------------------------------------
+
+Required properties:
+- compatible		: Should be "xlnx,spi-zynq".
+- reg			: Physical base address and size of SPI registers map.
+- status		: Status will be disabled in dtsi and enabled in required dts.
+- interrupt-parent	: Must be core interrupt controller.
+- interrupts		: Property with a value describing the interrupt
+			  number.
+- clocks		: Clock phandles (see clock bindings for details).
+- clock-names		: List of input clock names - "ref_clk", "pclk"
+			  (See clock bindings for details).
+
+Example:
+
+	spi@e0006000 {
+		compatible = "xlnx,zynq-spi";
+		reg = <0xe0006000 0x1000>;
+		status = "disabled";
+		interrupt-parent = <&intc>;
+		interrupts = <0 26 4>;
+		clocks = <&clkc 25>, <&clkc 34>;
+		clock-names = "ref_clk", "pclk";
+		#address-cells = <1>;
+		#size-cells = <0>;
+	} ;