@@ -814,6 +814,21 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
}
/*
+ * This writes the reg_07 value again to the hardware at the end of every
+ * set_rate call because the register loses its value. reg_07 allows setting
+ * absolute mode on v4 hardware
+ */
+static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
+ unsigned int rate)
+{
+ struct elantech_data *etd = psmouse->private;
+
+ etd->original_set_rate(psmouse, rate);
+ if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
+ psmouse_err(psmouse, "restoring reg_07 failed\n");
+}
+
+/*
* Put the touchpad into absolute mode
*/
static int elantech_set_absolute_mode(struct psmouse *psmouse)
@@ -1015,6 +1030,8 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
* Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons
* Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons
* Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons
+ * Asus TP500LN 0x381f17 10, 14, 0e clickpad
+ * Asus X750JN 0x381f17 10, 14, 0e clickpad
* Asus UX31 0x361f00 20, 15, 0e clickpad
* Asus UX32VD 0x361f02 00, 15, 0e clickpad
* Avatar AVIU-145A2 0x361f00 ? clickpad
@@ -1493,6 +1510,11 @@ int elantech_init(struct psmouse *psmouse)
goto init_fail;
}
+ if (etd->fw_version == 0x381f17) {
+ etd->original_set_rate = psmouse->set_rate;
+ psmouse->set_rate = elantech_set_rate_restore_reg_07;
+ }
+
if (elantech_set_input_params(psmouse)) {
psmouse_err(psmouse, "failed to query touchpad range.\n");
goto init_fail;
@@ -139,6 +139,7 @@ struct elantech_data {
struct finger_pos mt[ETP_MAX_FINGERS];
unsigned char parity[256];
int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
+ void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
};
#ifdef CONFIG_MOUSE_PS2_ELANTECH
This is a note to let you know that I have just added a patch titled Input: elantech - fix absolute mode setting on some ASUS laptops to the linux-3.16.y-queue branch of the 3.16.y-ckt extended stable tree which can be found at: http://kernel.ubuntu.com/git/ubuntu/linux.git/log/?h=linux-3.16.y-queue This patch is scheduled to be released in version 3.16.7-ckt11. If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.16.y-ckt tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Luis ------ From fd7097dbabd442568907d20427b0c5a045c0f747 Mon Sep 17 00:00:00 2001 From: Ulrik De Bie <ulrik.debie-os@e2big.org> Date: Mon, 6 Apr 2015 15:35:38 -0700 Subject: Input: elantech - fix absolute mode setting on some ASUS laptops commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream. On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each time set_rate is done. In order to fix this, we will verify the firmware version, and if it matches the one in those laptops, the set_rate function is overloaded with a function elantech_set_rate_restore_reg_07 that performs the set_rate with the original function, followed by a restore of reg_07 (the register that sets the absolute mode on elantech v4 hardware). Also the ASUS TP500LN and X750JN firmware version, capabilities, and button constellation is added to elantech.c Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Luis Henriques <luis.henriques@canonical.com> --- drivers/input/mouse/elantech.c | 22 ++++++++++++++++++++++ drivers/input/mouse/elantech.h | 1 + 2 files changed, 23 insertions(+)