@@ -12,7 +12,6 @@
#define ZYNQ_SYS_CTRL_BASEADDR 0xF8000000
#define ZYNQ_DEV_CFG_APB_BASEADDR 0xF8007000
#define ZYNQ_SCU_BASEADDR 0xF8F00000
-#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600
#define ZYNQ_GEM_BASEADDR0 0xE000B000
#define ZYNQ_GEM_BASEADDR1 0xE000C000
#define ZYNQ_SDHCI_BASEADDR0 0xE0100000
@@ -78,91 +78,10 @@ int timer_init(void)
}
/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-ulong get_timer_masked(void)
-{
- ulong now;
-
- now = readl(&timer_base->counter) /
- (gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
-
- if (gd->arch.lastinc >= now) {
- /* Normal mode */
- gd->arch.tbl += gd->arch.lastinc - now;
- } else {
- /* We have an overflow ... */
- gd->arch.tbl += gd->arch.lastinc + (TIMER_LOAD_VAL /
- (gd->arch.timer_rate_hz / CONFIG_SYS_HZ)) -
- now + 1;
- }
- gd->arch.lastinc = now;
-
- return gd->arch.tbl;
-}
-
-void __udelay(unsigned long usec)
-{
- u32 countticks;
- u32 timeend;
- u32 timediff;
- u32 timenow;
-
- if (usec == 0)
- return;
-
- countticks = lldiv(((unsigned long long)gd->arch.timer_rate_hz * usec),
- 1000000);
-
- /* decrementing timer */
- timeend = readl(&timer_base->counter) - countticks;
-
-#if TIMER_LOAD_VAL != 0xFFFFFFFF
- /* do not manage multiple overflow */
- if (countticks >= TIMER_LOAD_VAL)
- countticks = TIMER_LOAD_VAL - 1;
-#endif
-
- do {
- timenow = readl(&timer_base->counter);
-
- if (timenow >= timeend) {
- /* normal case */
- timediff = timenow - timeend;
- } else {
- if ((TIMER_LOAD_VAL - timeend + timenow) <=
- countticks) {
- /* overflow */
- timediff = TIMER_LOAD_VAL - timeend + timenow;
- } else {
- /* missed the exact match */
- break;
- }
- }
- } while (timediff > 0);
-}
-
-/* Timer without interrupts */
-ulong get_timer(ulong base)
-{
- return get_timer_masked() - base;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
* This function is derived from PowerPC code (timebase clock frequency).
* On ARM it returns the number of timer ticks per second.
*/
ulong get_tbclk(void)
{
- return CONFIG_SYS_HZ;
+ return gd->arch.timer_rate_hz;
}
@@ -25,6 +25,11 @@
# define CONFIG_SYS_PL310_BASE 0xf8f02000
#endif
+#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600
+#define CONFIG_SYS_TIMERBASE ZYNQ_SCUTIMER_BASEADDR
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
+
/* Serial drivers */
#define CONFIG_BAUDRATE 115200
/* The following table includes the supported baudrates */
Don't use error-prone arch timer code and instead use system timer implementation to simplify our code. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Changes in v2: - Fix commit message - Reported-by: Tom Rini <trini@konsulko.com> arch/arm/mach-zynq/include/mach/hardware.h | 1 - arch/arm/mach-zynq/timer.c | 83 +----------------------------- include/configs/zynq-common.h | 5 ++ 3 files changed, 6 insertions(+), 83 deletions(-)