[v2,8/8] Documentation: Add WM8998/WM1814 device tree bindings
diff mbox

Message ID 1430318229-28518-9-git-send-email-rf@opensource.wolfsonmicro.com
State New
Headers show

Commit Message

Richard Fitzgerald April 29, 2015, 2:37 p.m. UTC
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
 Documentation/devicetree/bindings/mfd/arizona.txt |   13 +++++++++----
 1 files changed, 9 insertions(+), 4 deletions(-)

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 7665aa9..64fa3b2 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -10,6 +10,9 @@  Required properties:
         "wlf,wm5110"
         "wlf,wm8280"
         "wlf,wm8997"
+        "wlf,wm8998"
+        "wlf,wm1814"
+
   - reg : I2C slave address when connected using I2C, chip select number when
     using SPI.
 
@@ -31,10 +34,10 @@  Required properties:
     as covered in Documentation/devicetree/bindings/regulator/regulator.txt
 
   - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102,
-    wm5110, wm8280)
+    wm5110, wm8280, wm8998, wm1814)
 
   - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102,
-    wm5110, wm8280)
+    wm5110, wm8280, wm8998, wm1814)
 
   - SPKVDD-supply : Speaker driver power supply (wm8997)
 
@@ -53,8 +56,10 @@  Optional properties:
     of input signals. Valid values are 0 (Differential), 1 (Single-ended) and
     2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default.
     If present, values must be specified less than or equal to the number of
-    input singals. If values less than the number of input signals, elements
-    that has not been specifed are set to 0 by default.
+    input signals. If values less than the number of input signals, elements
+    that have not been specified are set to 0 by default. Entries are:
+    <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
+    <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
 
   - wlf,dmic-ref : DMIC reference voltage source for each input, can be
     selected from either MICVDD or one of the MICBIAS's, defines