@@ -58,7 +58,7 @@ struct virtio_blk_config {
uint32_t size_max;
/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
uint32_t seg_max;
- /* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
+ /* geometry of the device (if VIRTIO_BLK_F_GEOMETRY) */
struct virtio_blk_geometry {
uint16_t cylinders;
uint8_t heads;
@@ -117,7 +117,11 @@ struct virtio_blk_config {
#define VIRTIO_BLK_T_BARRIER 0x80000000
#endif /* !VIRTIO_BLK_NO_LEGACY */
-/* This is the first element of the read scatter-gather list. */
+/*
+ * This comes first in the read scatter-gather list.
+ * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated,
+ * this is the first element of the read scatter-gather list.
+ */
struct virtio_blk_outhdr {
/* VIRTIO_BLK_T* */
__virtio32 type;
@@ -198,6 +198,9 @@ struct kvm_arch_memory_slot {
/* Highest supported SPI, from VGIC_NR_IRQS */
#define KVM_ARM_IRQ_GIC_MAX 127
+/* One single KVM irqchip, ie. the VGIC */
+#define KVM_NR_IRQCHIPS 1
+
/* PSCI interface */
#define KVM_PSCI_FN_BASE 0x95c1ba5e
#define KVM_PSCI_FN(n) (KVM_PSCI_FN_BASE + (n))
@@ -191,6 +191,9 @@ struct kvm_arch_memory_slot {
/* Highest supported SPI, from VGIC_NR_IRQS */
#define KVM_ARM_IRQ_GIC_MAX 127
+/* One single KVM irqchip, ie. the VGIC */
+#define KVM_NR_IRQCHIPS 1
+
/* PSCI interface */
#define KVM_PSCI_FN_BASE 0x95c1ba5e
#define KVM_PSCI_FN(n) (KVM_PSCI_FN_BASE + (n))
@@ -36,77 +36,85 @@ struct kvm_regs {
/*
* for KVM_GET_FPU and KVM_SET_FPU
- *
- * If Status[FR] is zero (32-bit FPU), the upper 32-bits of the FPRs
- * are zero filled.
*/
struct kvm_fpu {
- __u64 fpr[32];
- __u32 fir;
- __u32 fccr;
- __u32 fexr;
- __u32 fenr;
- __u32 fcsr;
- __u32 pad;
};
/*
- * For MIPS, we use KVM_SET_ONE_REG and KVM_GET_ONE_REG to access CP0
+ * For MIPS, we use KVM_SET_ONE_REG and KVM_GET_ONE_REG to access various
* registers. The id field is broken down as follows:
*
- * bits[2..0] - Register 'sel' index.
- * bits[7..3] - Register 'rd' index.
- * bits[15..8] - Must be zero.
- * bits[31..16] - 1 -> CP0 registers.
- * bits[51..32] - Must be zero.
* bits[63..52] - As per linux/kvm.h
+ * bits[51..32] - Must be zero.
+ * bits[31..16] - Register set.
+ *
+ * Register set = 0: GP registers from kvm_regs (see definitions below).
+ *
+ * Register set = 1: CP0 registers.
+ * bits[15..8] - Must be zero.
+ * bits[7..3] - Register 'rd' index.
+ * bits[2..0] - Register 'sel' index.
+ *
+ * Register set = 2: KVM specific registers (see definitions below).
+ *
+ * Register set = 3: FPU / MSA registers (see definitions below).
*
* Other sets registers may be added in the future. Each set would
* have its own identifier in bits[31..16].
- *
- * The registers defined in struct kvm_regs are also accessible, the
- * id values for these are below.
*/
-#define KVM_REG_MIPS_R0 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 0)
-#define KVM_REG_MIPS_R1 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 1)
-#define KVM_REG_MIPS_R2 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 2)
-#define KVM_REG_MIPS_R3 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 3)
-#define KVM_REG_MIPS_R4 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 4)
-#define KVM_REG_MIPS_R5 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 5)
-#define KVM_REG_MIPS_R6 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 6)
-#define KVM_REG_MIPS_R7 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 7)
-#define KVM_REG_MIPS_R8 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 8)
-#define KVM_REG_MIPS_R9 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 9)
-#define KVM_REG_MIPS_R10 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 10)
-#define KVM_REG_MIPS_R11 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 11)
-#define KVM_REG_MIPS_R12 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 12)
-#define KVM_REG_MIPS_R13 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 13)
-#define KVM_REG_MIPS_R14 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 14)
-#define KVM_REG_MIPS_R15 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 15)
-#define KVM_REG_MIPS_R16 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 16)
-#define KVM_REG_MIPS_R17 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 17)
-#define KVM_REG_MIPS_R18 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 18)
-#define KVM_REG_MIPS_R19 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 19)
-#define KVM_REG_MIPS_R20 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 20)
-#define KVM_REG_MIPS_R21 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 21)
-#define KVM_REG_MIPS_R22 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 22)
-#define KVM_REG_MIPS_R23 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 23)
-#define KVM_REG_MIPS_R24 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 24)
-#define KVM_REG_MIPS_R25 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 25)
-#define KVM_REG_MIPS_R26 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 26)
-#define KVM_REG_MIPS_R27 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 27)
-#define KVM_REG_MIPS_R28 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 28)
-#define KVM_REG_MIPS_R29 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 29)
-#define KVM_REG_MIPS_R30 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 30)
-#define KVM_REG_MIPS_R31 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 31)
-
-#define KVM_REG_MIPS_HI (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 32)
-#define KVM_REG_MIPS_LO (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 33)
-#define KVM_REG_MIPS_PC (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 34)
-
-/* KVM specific control registers */
+#define KVM_REG_MIPS_GP (KVM_REG_MIPS | 0x0000000000000000ULL)
+#define KVM_REG_MIPS_CP0 (KVM_REG_MIPS | 0x0000000000010000ULL)
+#define KVM_REG_MIPS_KVM (KVM_REG_MIPS | 0x0000000000020000ULL)
+#define KVM_REG_MIPS_FPU (KVM_REG_MIPS | 0x0000000000030000ULL)
+
+
+/*
+ * KVM_REG_MIPS_GP - General purpose registers from kvm_regs.
+ */
+
+#define KVM_REG_MIPS_R0 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 0)
+#define KVM_REG_MIPS_R1 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 1)
+#define KVM_REG_MIPS_R2 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 2)
+#define KVM_REG_MIPS_R3 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 3)
+#define KVM_REG_MIPS_R4 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 4)
+#define KVM_REG_MIPS_R5 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 5)
+#define KVM_REG_MIPS_R6 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 6)
+#define KVM_REG_MIPS_R7 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 7)
+#define KVM_REG_MIPS_R8 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 8)
+#define KVM_REG_MIPS_R9 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 9)
+#define KVM_REG_MIPS_R10 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 10)
+#define KVM_REG_MIPS_R11 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 11)
+#define KVM_REG_MIPS_R12 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 12)
+#define KVM_REG_MIPS_R13 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 13)
+#define KVM_REG_MIPS_R14 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 14)
+#define KVM_REG_MIPS_R15 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 15)
+#define KVM_REG_MIPS_R16 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 16)
+#define KVM_REG_MIPS_R17 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 17)
+#define KVM_REG_MIPS_R18 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 18)
+#define KVM_REG_MIPS_R19 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 19)
+#define KVM_REG_MIPS_R20 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 20)
+#define KVM_REG_MIPS_R21 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 21)
+#define KVM_REG_MIPS_R22 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 22)
+#define KVM_REG_MIPS_R23 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 23)
+#define KVM_REG_MIPS_R24 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 24)
+#define KVM_REG_MIPS_R25 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 25)
+#define KVM_REG_MIPS_R26 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 26)
+#define KVM_REG_MIPS_R27 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 27)
+#define KVM_REG_MIPS_R28 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 28)
+#define KVM_REG_MIPS_R29 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 29)
+#define KVM_REG_MIPS_R30 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 30)
+#define KVM_REG_MIPS_R31 (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 31)
+
+#define KVM_REG_MIPS_HI (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 32)
+#define KVM_REG_MIPS_LO (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 33)
+#define KVM_REG_MIPS_PC (KVM_REG_MIPS_GP | KVM_REG_SIZE_U64 | 34)
+
+
+/*
+ * KVM_REG_MIPS_KVM - KVM specific control registers.
+ */
/*
* CP0_Count control
@@ -118,8 +126,7 @@ struct kvm_fpu {
* safely without losing time or guest timer interrupts.
* Other: Reserved, do not change.
*/
-#define KVM_REG_MIPS_COUNT_CTL (KVM_REG_MIPS | KVM_REG_SIZE_U64 | \
- 0x20000 | 0)
+#define KVM_REG_MIPS_COUNT_CTL (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 0)
#define KVM_REG_MIPS_COUNT_CTL_DC 0x00000001
/*
@@ -131,15 +138,46 @@ struct kvm_fpu {
* emulated.
* Modifications to times in the future are rejected.
*/
-#define KVM_REG_MIPS_COUNT_RESUME (KVM_REG_MIPS | KVM_REG_SIZE_U64 | \
- 0x20000 | 1)
+#define KVM_REG_MIPS_COUNT_RESUME (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 1)
/*
* CP0_Count rate in Hz
* Specifies the rate of the CP0_Count timer in Hz. Modifications occur without
* discontinuities in CP0_Count.
*/
-#define KVM_REG_MIPS_COUNT_HZ (KVM_REG_MIPS | KVM_REG_SIZE_U64 | \
- 0x20000 | 2)
+#define KVM_REG_MIPS_COUNT_HZ (KVM_REG_MIPS_KVM | KVM_REG_SIZE_U64 | 2)
+
+
+/*
+ * KVM_REG_MIPS_FPU - Floating Point and MIPS SIMD Architecture (MSA) registers.
+ *
+ * bits[15..8] - Register subset (see definitions below).
+ * bits[7..5] - Must be zero.
+ * bits[4..0] - Register number within register subset.
+ */
+
+#define KVM_REG_MIPS_FPR (KVM_REG_MIPS_FPU | 0x0000000000000000ULL)
+#define KVM_REG_MIPS_FCR (KVM_REG_MIPS_FPU | 0x0000000000000100ULL)
+#define KVM_REG_MIPS_MSACR (KVM_REG_MIPS_FPU | 0x0000000000000200ULL)
+
+/*
+ * KVM_REG_MIPS_FPR - Floating point / Vector registers.
+ */
+#define KVM_REG_MIPS_FPR_32(n) (KVM_REG_MIPS_FPR | KVM_REG_SIZE_U32 | (n))
+#define KVM_REG_MIPS_FPR_64(n) (KVM_REG_MIPS_FPR | KVM_REG_SIZE_U64 | (n))
+#define KVM_REG_MIPS_VEC_128(n) (KVM_REG_MIPS_FPR | KVM_REG_SIZE_U128 | (n))
+
+/*
+ * KVM_REG_MIPS_FCR - Floating point control registers.
+ */
+#define KVM_REG_MIPS_FCR_IR (KVM_REG_MIPS_FCR | KVM_REG_SIZE_U32 | 0)
+#define KVM_REG_MIPS_FCR_CSR (KVM_REG_MIPS_FCR | KVM_REG_SIZE_U32 | 31)
+
+/*
+ * KVM_REG_MIPS_MSACR - MIPS SIMD Architecture (MSA) control registers.
+ */
+#define KVM_REG_MIPS_MSA_IR (KVM_REG_MIPS_MSACR | KVM_REG_SIZE_U32 | 0)
+#define KVM_REG_MIPS_MSA_CSR (KVM_REG_MIPS_MSACR | KVM_REG_SIZE_U32 | 1)
+
/*
* KVM MIPS specific structures and definitions
@@ -150,6 +150,7 @@ struct kvm_guest_debug_arch {
#define KVM_SYNC_CRS (1UL << 3)
#define KVM_SYNC_ARCH0 (1UL << 4)
#define KVM_SYNC_PFAULT (1UL << 5)
+#define KVM_SYNC_VRS (1UL << 6)
/* definition of registers in kvm_run */
struct kvm_sync_regs {
__u64 prefix; /* prefix register */
@@ -164,6 +165,9 @@ struct kvm_sync_regs {
__u64 pft; /* pfault token [PFAULT] */
__u64 pfs; /* pfault select [PFAULT] */
__u64 pfc; /* pfault compare [PFAULT] */
+ __u64 vrs[32][2]; /* vector registers */
+ __u8 reserved[512]; /* for future vector expansion */
+ __u32 fpc; /* only valid with vector registers */
};
#define KVM_REG_S390_TODPR (KVM_REG_S390 | KVM_REG_SIZE_U32 | 0x1)
@@ -147,6 +147,16 @@ struct kvm_pit_config {
#define KVM_PIT_SPEAKER_DUMMY 1
+struct kvm_s390_skeys {
+ __u64 start_gfn;
+ __u64 count;
+ __u64 skeydata_addr;
+ __u32 flags;
+ __u32 reserved[9];
+};
+#define KVM_S390_GET_SKEYS_NONE 1
+#define KVM_S390_SKEYS_MAX 1048576
+
#define KVM_EXIT_UNKNOWN 0
#define KVM_EXIT_EXCEPTION 1
#define KVM_EXIT_IO 2
@@ -172,6 +182,7 @@ struct kvm_pit_config {
#define KVM_EXIT_S390_TSCH 22
#define KVM_EXIT_EPR 23
#define KVM_EXIT_SYSTEM_EVENT 24
+#define KVM_EXIT_S390_STSI 25
/* For KVM_EXIT_INTERNAL_ERROR */
/* Emulate instruction failed. */
@@ -309,6 +320,15 @@ struct kvm_run {
__u32 type;
__u64 flags;
} system_event;
+ /* KVM_EXIT_S390_STSI */
+ struct {
+ __u64 addr;
+ __u8 ar;
+ __u8 reserved;
+ __u8 fc;
+ __u8 sel1;
+ __u16 sel2;
+ } s390_stsi;
/* Fix the size of the union. */
char padding[256];
};
@@ -324,7 +344,7 @@ struct kvm_run {
__u64 kvm_dirty_regs;
union {
struct kvm_sync_regs regs;
- char padding[1024];
+ char padding[2048];
} s;
};
@@ -365,6 +385,24 @@ struct kvm_translation {
__u8 pad[5];
};
+/* for KVM_S390_MEM_OP */
+struct kvm_s390_mem_op {
+ /* in */
+ __u64 gaddr; /* the guest address */
+ __u64 flags; /* flags */
+ __u32 size; /* amount of bytes */
+ __u32 op; /* type of operation */
+ __u64 buf; /* buffer in userspace */
+ __u8 ar; /* the access register number */
+ __u8 reserved[31]; /* should be set to 0 */
+};
+/* types for kvm_s390_mem_op->op */
+#define KVM_S390_MEMOP_LOGICAL_READ 0
+#define KVM_S390_MEMOP_LOGICAL_WRITE 1
+/* flags for kvm_s390_mem_op->flags */
+#define KVM_S390_MEMOP_F_CHECK_ONLY (1ULL << 0)
+#define KVM_S390_MEMOP_F_INJECT_EXCEPTION (1ULL << 1)
+
/* for KVM_INTERRUPT */
struct kvm_interrupt {
/* in */
@@ -520,6 +558,13 @@ struct kvm_s390_irq {
} u;
};
+struct kvm_s390_irq_state {
+ __u64 buf;
+ __u32 flags;
+ __u32 len;
+ __u32 reserved[4];
+};
+
/* for KVM_SET_GUEST_DEBUG */
#define KVM_GUESTDBG_ENABLE 0x00000001
@@ -760,6 +805,14 @@ struct kvm_ppc_smmu_info {
#define KVM_CAP_PPC_ENABLE_HCALL 104
#define KVM_CAP_CHECK_EXTENSION_VM 105
#define KVM_CAP_S390_USER_SIGP 106
+#define KVM_CAP_S390_VECTOR_REGISTERS 107
+#define KVM_CAP_S390_MEM_OP 108
+#define KVM_CAP_S390_USER_STSI 109
+#define KVM_CAP_S390_SKEYS 110
+#define KVM_CAP_MIPS_FPU 111
+#define KVM_CAP_MIPS_MSA 112
+#define KVM_CAP_S390_INJECT_IRQ 113
+#define KVM_CAP_S390_IRQ_STATE 114
#ifdef KVM_CAP_IRQ_ROUTING
@@ -1135,6 +1188,16 @@ struct kvm_s390_ucas_mapping {
#define KVM_ARM_VCPU_INIT _IOW(KVMIO, 0xae, struct kvm_vcpu_init)
#define KVM_ARM_PREFERRED_TARGET _IOR(KVMIO, 0xaf, struct kvm_vcpu_init)
#define KVM_GET_REG_LIST _IOWR(KVMIO, 0xb0, struct kvm_reg_list)
+/* Available with KVM_CAP_S390_MEM_OP */
+#define KVM_S390_MEM_OP _IOW(KVMIO, 0xb1, struct kvm_s390_mem_op)
+/* Available with KVM_CAP_S390_SKEYS */
+#define KVM_S390_GET_SKEYS _IOW(KVMIO, 0xb2, struct kvm_s390_skeys)
+#define KVM_S390_SET_SKEYS _IOW(KVMIO, 0xb3, struct kvm_s390_skeys)
+/* Available with KVM_CAP_S390_INJECT_IRQ */
+#define KVM_S390_IRQ _IOW(KVMIO, 0xb4, struct kvm_s390_irq)
+/* Available with KVM_CAP_S390_IRQ_STATE */
+#define KVM_S390_SET_IRQ_STATE _IOW(KVMIO, 0xb5, struct kvm_s390_irq_state)
+#define KVM_S390_GET_IRQ_STATE _IOW(KVMIO, 0xb6, struct kvm_s390_irq_state)
#define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
#define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1)
@@ -160,6 +160,8 @@ struct vfio_device_info {
__u32 flags;
#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */
#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */
+#define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */
+#define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */
__u32 num_regions; /* Max region index + 1 */
__u32 num_irqs; /* Max IRQ index + 1 */
};
This includes, among other things, VFIO platform driver and irqfd/arm. Signed-off-by: Eric Auger <eric.auger@linaro.org> --- v12 -> v13: - update for 4.1-rc0 headers v10 -> v11: - only includes header modifications related to vfio platform driver v14 and not those related to "vfio: type1: support for ARM SMMUS with VFIO_IOMMU_TYPE1" --- include/standard-headers/linux/virtio_blk.h | 8 +- linux-headers/asm-arm/kvm.h | 3 + linux-headers/asm-arm64/kvm.h | 3 + linux-headers/asm-mips/kvm.h | 164 +++++++++++++++++----------- linux-headers/asm-s390/kvm.h | 4 + linux-headers/linux/kvm.h | 65 ++++++++++- linux-headers/linux/vfio.h | 2 + 7 files changed, 183 insertions(+), 66 deletions(-)