| Message ID | 1429867387-10219-1-git-send-email-varkab@cdac.in |
|---|---|
| State | Accepted, archived |
| Commit | ee1a81f90f28a5a2c3339ec62b2a6a6d165075d2 |
| Headers | show |
On 04/24/2015 02:53 PM, Varka Bhadram wrote: > Signed-off-by: Varka Bhadram <varkab@cdac.in> > --- > .../devicetree/bindings/iio/imu/inv_mpu6050.txt | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt > > diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt > new file mode 100644 > index 0000000..e4d8f1c > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt > @@ -0,0 +1,17 @@ > +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device > + > +http://www.invensense.com/mems/gyro/mpu6050.html > + > +Required properties: > + - compatible : should be "invensense,mpu6050" > + - reg : the I2C address of the sensor > + - interrupt-parent : should be the phandle for the interrupt controller > + - interrupts : interrupt mapping for GPIO IRQ > + > +Example: > + mpu6050@68 { > + compatible = "invensense,mpu6050"; > + reg = <0x68>; > + interrupt-parent = <&gpio1>; > + interrupts = <18 1>; > + }; Ping..?
On 28 April 2015 04:31:06 BST, Varka Bhadram <varkabhadram@gmail.com> wrote: >On 04/24/2015 02:53 PM, Varka Bhadram wrote: > >> Signed-off-by: Varka Bhadram <varkab@cdac.in> >> --- >> .../devicetree/bindings/iio/imu/inv_mpu6050.txt | 17 >+++++++++++++++++ >> 1 file changed, 17 insertions(+) >> create mode 100644 >Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt >> >> diff --git >a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt >b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt >> new file mode 100644 >> index 0000000..e4d8f1c >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt >> @@ -0,0 +1,17 @@ >> +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS >MotionTracking Device >> + >> +http://www.invensense.com/mems/gyro/mpu6050.html >> + >> +Required properties: >> + - compatible : should be "invensense,mpu6050" >> + - reg : the I2C address of the sensor >> + - interrupt-parent : should be the phandle for the interrupt >controller >> + - interrupts : interrupt mapping for GPIO IRQ >> + >> +Example: >> + mpu6050@68 { >> + compatible = "invensense,mpu6050"; >> + reg = <0x68>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <18 1>; >> + }; > >Ping..? Device tree bindings. Either need a device tree back or 3 weeks to pass before I can take them. Looks fine to me! Could cross ref the interrupts binding doc....
On 24/04/15 05:23, Varka Bhadram wrote: > Signed-off-by: Varka Bhadram <varkab@cdac.in> Applied to the togreg branch of iio.git. Will be initially pushed out as testing for the autobuilders to play with it. Thanks, Jonathan > --- > .../devicetree/bindings/iio/imu/inv_mpu6050.txt | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt > > diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt > new file mode 100644 > index 0000000..e4d8f1c > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt > @@ -0,0 +1,17 @@ > +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device > + > +http://www.invensense.com/mems/gyro/mpu6050.html > + > +Required properties: > + - compatible : should be "invensense,mpu6050" > + - reg : the I2C address of the sensor > + - interrupt-parent : should be the phandle for the interrupt controller > + - interrupts : interrupt mapping for GPIO IRQ > + > +Example: > + mpu6050@68 { > + compatible = "invensense,mpu6050"; > + reg = <0x68>; > + interrupt-parent = <&gpio1>; > + interrupts = <18 1>; > + }; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt new file mode 100644 index 0000000..e4d8f1c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt @@ -0,0 +1,17 @@ +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device + +http://www.invensense.com/mems/gyro/mpu6050.html + +Required properties: + - compatible : should be "invensense,mpu6050" + - reg : the I2C address of the sensor + - interrupt-parent : should be the phandle for the interrupt controller + - interrupts : interrupt mapping for GPIO IRQ + +Example: + mpu6050@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = <18 1>; + };
Signed-off-by: Varka Bhadram <varkab@cdac.in> --- .../devicetree/bindings/iio/imu/inv_mpu6050.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt