[U-Boot,3/6] ARMv7M: add STM32F1 support

diff --git a/arch/arm/cpu/armv7m/Makefile b/arch/arm/cpu/armv7m/Makefile
index b662e03..93a1956 100644
--- a/arch/arm/cpu/armv7m/Makefile
+++ b/arch/arm/cpu/armv7m/Makefile
@@ -8,4 +8,5 @@ 
 extra-y := start.o
 obj-y += cpu.o
 
+obj-$(CONFIG_STM32F1) += stm32f1/
 obj-$(CONFIG_STM32F4) += stm32f4/
diff --git a/arch/arm/cpu/armv7m/stm32f1/Makefile b/arch/arm/cpu/armv7m/stm32f1/Makefile
new file mode 100644
index 0000000..7b43761
--- /dev/null
+++ b/arch/arm/cpu/armv7m/stm32f1/Makefile
@@ -0,0 +1,13 @@ 
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2015
+# Kamil Lulko, <rev13@wp.pl>
+#
+# Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += soc.o clock.o timer.o flash.o
diff --git a/arch/arm/cpu/armv7m/stm32f1/clock.c b/arch/arm/cpu/armv7m/stm32f1/clock.c
new file mode 100644
index 0000000..b921eff
--- /dev/null
+++ b/arch/arm/cpu/armv7m/stm32f1/clock.c
@@ -0,0 +1,195 @@ 
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * (C) Copyright 2014
+ * STMicroelectronics
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/stm32.h>
+
+#define RCC_CR_HSION		(1 << 0)
+#define RCC_CR_HSEON		(1 << 16)
+#define RCC_CR_HSERDY		(1 << 17)
+#define RCC_CR_HSEBYP		(1 << 18)
+#define RCC_CR_CSSON		(1 << 19)
+#define RCC_CR_PLLON		(1 << 24)
+#define RCC_CR_PLLRDY		(1 << 25)
+
+#define RCC_CFGR_PLLMUL_MASK	0x3C0000
+#define RCC_CFGR_PLLMUL_SHIFT	18
+#define RCC_CFGR_PLLSRC_HSE	(1 << 16)
+
+#define RCC_CFGR_AHB_PSC_MASK	0xF0
+#define RCC_CFGR_APB1_PSC_MASK	0x700
+#define RCC_CFGR_APB2_PSC_MASK	0x3800
+#define RCC_CFGR_SW0		(1 << 0)
+#define RCC_CFGR_SW1		(1 << 1)
+#define RCC_CFGR_SW_MASK	0x3
+#define RCC_CFGR_SW_HSI		0
+#define RCC_CFGR_SW_HSE		RCC_CFGR_SW0
+#define RCC_CFGR_SW_PLL		RCC_CFGR_SW1
+#define RCC_CFGR_SWS0		(1 << 2)
+#define RCC_CFGR_SWS1		(1 << 3)
+#define RCC_CFGR_SWS_MASK	0xC
+#define RCC_CFGR_SWS_HSI	0
+#define RCC_CFGR_SWS_HSE	RCC_CFGR_SWS0
+#define RCC_CFGR_SWS_PLL	RCC_CFGR_SWS1
+#define RCC_CFGR_HPRE_SHIFT	4
+#define RCC_CFGR_PPRE1_SHIFT	8
+#define RCC_CFGR_PPRE2_SHIFT	11
+
+#define RCC_APB1ENR_PWREN	(1 << 28)
+
+#define PWR_CR_VOS0		(1 << 14)
+#define PWR_CR_VOS1		(1 << 15)
+#define PWR_CR_VOS_MASK		0xC000
+#define PWR_CR_VOS_SCALE_MODE_1	(PWR_CR_VOS0 | PWR_CR_VOS1)
+#define PWR_CR_VOS_SCALE_MODE_2	(PWR_CR_VOS1)
+#define PWR_CR_VOS_SCALE_MODE_3	(PWR_CR_VOS0)
+
+#define FLASH_ACR_WS(n)		n
+#define FLASH_ACR_PRFTEN	(1 << 8)
+#define FLASH_ACR_ICEN		(1 << 9)
+#define FLASH_ACR_DCEN		(1 << 10)
+
+struct psc {
+	u8	ahb_psc;
+	u8	apb1_psc;
+	u8	apb2_psc;
+};
+
+#define AHB_PSC_1		0
+#define AHB_PSC_2		0x8
+#define AHB_PSC_4		0x9
+#define AHB_PSC_8		0xA
+#define AHB_PSC_16		0xB
+#define AHB_PSC_64		0xC
+#define AHB_PSC_128		0xD
+#define AHB_PSC_256		0xE
+#define AHB_PSC_512		0xF
+
+#define APB_PSC_1		0
+#define APB_PSC_2		0x4
+#define APB_PSC_4		0x5
+#define APB_PSC_8		0x6
+#define APB_PSC_16		0x7
+
+#if !defined(CONFIG_STM32_HSE_HZ)
+#error "CONFIG_STM32_HSE_HZ not defined!"
+#else
+#if (CONFIG_STM32_HSE_HZ == 8000000)
+#define RCC_CFGR_PLLMUL_CFG	0x7
+struct psc psc_hse = {
+	.ahb_psc = AHB_PSC_1,
+	.apb1_psc = APB_PSC_2,
+	.apb2_psc = APB_PSC_1
+};
+#else
+#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists"
+#endif
+#endif
+
+int configure_clocks(void)
+{
+	/* Reset RCC configuration */
+	setbits_le32(&STM32_RCC->cr, RCC_CR_HSION);
+	writel(0, &STM32_RCC->cfgr); /* Reset CFGR */
+	clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON
+		| RCC_CR_PLLON));
+	clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP);
+	writel(0, &STM32_RCC->cir); /* Disable all interrupts */
+
+	/* Configure for HSE+PLL operation */
+	setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON);
+	while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY))
+		;
+
+	/* Enable high performance mode, System frequency up to 168 MHz */
+	setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN);
+	writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr);
+
+	setbits_le32(&STM32_RCC->cfgr,
+		     RCC_CFGR_PLLMUL_CFG << RCC_CFGR_PLLMUL_SHIFT);
+	setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_PLLSRC_HSE);
+	setbits_le32(&STM32_RCC->cfgr, ((
+		psc_hse.ahb_psc << RCC_CFGR_HPRE_SHIFT)
+		| (psc_hse.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
+		| (psc_hse.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
+
+	setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON);
+
+	while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY))
+		;
+
+	/* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */
+	writel(FLASH_ACR_WS(5) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN
+		| FLASH_ACR_DCEN, &STM32_FLASH->acr);
+
+	clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
+	setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL);
+
+	while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) !=
+			RCC_CFGR_SWS_PLL)
+		;
+
+	return 0;
+}
+
+unsigned long clock_get(enum clock clck)
+{
+	u32 sysclk = 0;
+	u32 shift = 0;
+	/* PLL table lookups for clock computation */
+	u8 pll_mul_table[16] = {
+		2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 16
+	};
+	/* Prescaler table lookups for clock computation */
+	u8 ahb_psc_table[16] = {
+		0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9
+	};
+	u8 apb_psc_table[8] = {
+		0, 0, 0, 0, 1, 2, 3, 4
+	};
+
+	if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) ==
+			RCC_CFGR_SWS_PLL) {
+		u16 pll;
+		pll = ((readl(&STM32_RCC->cfgr) & RCC_CFGR_PLLMUL_MASK)
+			>> RCC_CFGR_PLLMUL_SHIFT);
+		sysclk = CONFIG_STM32_HSE_HZ * pll_mul_table[pll];
+	}
+
+	switch (clck) {
+	case CLOCK_CORE:
+		return sysclk;
+		break;
+	case CLOCK_AHB:
+		shift = ahb_psc_table[(
+			(readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK)
+			>> RCC_CFGR_HPRE_SHIFT)];
+		return sysclk >>= shift;
+		break;
+	case CLOCK_APB1:
+		shift = apb_psc_table[(
+			(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK)
+			>> RCC_CFGR_PPRE1_SHIFT)];
+		return sysclk >>= shift;
+		break;
+	case CLOCK_APB2:
+		shift = apb_psc_table[(
+			(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK)
+			>> RCC_CFGR_PPRE2_SHIFT)];
+		return sysclk >>= shift;
+		break;
+	default:
+		return 0;
+		break;
+	}
+}
diff --git a/arch/arm/cpu/armv7m/stm32f1/flash.c b/arch/arm/cpu/armv7m/stm32f1/flash.c
new file mode 100644
index 0000000..b1ee1d9
--- /dev/null
+++ b/arch/arm/cpu/armv7m/stm32f1/flash.c
@@ -0,0 +1,179 @@ 
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/stm32.h>
+
+#define STM32_FLASH_KEY1	0x45670123
+#define STM32_FLASH_KEY2	0xcdef89ab
+
+#define STM32_NUM_BANKS	2
+#define STM32_MAX_BANK	0x200
+
+flash_info_t flash_info[STM32_NUM_BANKS];
+static struct stm32_flash_bank_regs *flash_bank[STM32_NUM_BANKS];
+
+static void stm32f1_flash_lock(u8 bank, u8 lock)
+{
+	if (lock) {
+		setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_LOCK);
+	} else {
+		writel(STM32_FLASH_KEY1, &flash_bank[bank]->keyr);
+		writel(STM32_FLASH_KEY2, &flash_bank[bank]->keyr);
+	}
+}
+
+/* Only XL devices are supported (2 KiB sector size) */
+unsigned long flash_init(void)
+{
+	u8 i, banks;
+	u16 j, size;
+
+	/* Set up accessors for XL devices with wonky register layout */
+	flash_bank[0] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr;
+	flash_bank[1] = (struct stm32_flash_bank_regs *)&STM32_FLASH->keyr2;
+
+	/*
+	 * Get total flash size (in KiB) and configure number of banks
+	 * present and sector count per bank.
+	 */
+	size = readw(&STM32_DES->flash_size);
+	if (size <= STM32_MAX_BANK) {
+		banks = 1;
+		flash_info[0].sector_count = size >> 1;
+	} else if (size > STM32_MAX_BANK) {
+		banks = 2;
+		flash_info[0].sector_count = STM32_MAX_BANK >> 1;
+		flash_info[1].sector_count = (size - STM32_MAX_BANK) >> 1;
+	}
+
+	/* Configure start/size for all sectors */
+	for (i = 0; i < banks; i++) {
+		flash_info[i].flash_id = FLASH_STM32F1;
+		flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 19);
+		flash_info[i].size = 2048;
+		for (j = 1; (j < flash_info[i].sector_count); j++) {
+			flash_info[i].start[j] = flash_info[i].start[j - 1]
+				+ 2048;
+			flash_info[i].size += 2048;
+		}
+	}
+
+	return size << 10;
+}
+
+void flash_print_info(flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("Missing or unknown FLASH type\n");
+		return;
+	} else if (info->flash_id == FLASH_STM32F1) {
+		printf("STM32F1 Embedded Flash\n");
+	}
+
+	printf("  Size: %ld MB in %d Sectors\n",
+	       info->size >> 10, info->sector_count);
+
+	printf("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s",
+		       info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+	printf("\n");
+	return;
+}
+
+int flash_erase(flash_info_t *info, int first, int last)
+{
+	u8 bank = 0xff;
+	int i;
+
+	for (i = 0; i < STM32_NUM_BANKS; i++) {
+		if (info == &flash_info[i]) {
+			bank = i;
+			break;
+		}
+	}
+	if (bank == 0xff)
+		return -1;
+
+	stm32f1_flash_lock(bank, 0);
+
+	for (i = first; i <= last; i++) {
+		while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
+			;
+
+		setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER);
+
+		writel(info->start[i], &flash_bank[bank]->ar);
+
+		setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_STRT);
+
+		while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
+			;
+	}
+
+	clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PER);
+
+	stm32f1_flash_lock(bank, 1);
+
+	return 0;
+}
+
+int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong i;
+	u8 bank = 0xff;
+
+	if (addr & 1) {
+		printf("Flash address must be half word aligned\n");
+		return -1;
+	}
+
+	if (cnt & 1) {
+		printf("Flash length must be half word aligned\n");
+		return -1;
+	}
+
+	for (i = 0; i < 2; i++) {
+		if (info == &flash_info[i]) {
+			bank = i;
+			break;
+		}
+	}
+
+	if (bank == 0xff)
+		return -1;
+
+	while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
+		;
+
+	stm32f1_flash_lock(bank, 0);
+
+	setbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG);
+
+	/* STM32F1 requires half word writes */
+	for (i = 0; i < cnt >> 1; i++) {
+		*(u16 *)(addr + i * 2) = ((u16 *)src)[i];
+		while (readl(&flash_bank[bank]->sr) & STM32_FLASH_SR_BSY)
+			;
+	}
+
+	clrbits_le32(&flash_bank[bank]->cr, STM32_FLASH_CR_PG);
+
+	stm32f1_flash_lock(bank, 1);
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7m/stm32f1/soc.c b/arch/arm/cpu/armv7m/stm32f1/soc.c
new file mode 100644
index 0000000..ecb1269
--- /dev/null
+++ b/arch/arm/cpu/armv7m/stm32f1/soc.c
@@ -0,0 +1,35 @@ 
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+#include <asm/arch/stm32.h>
+
+u32 get_cpu_rev(void)
+{
+	return 0;
+}
+
+int arch_cpu_init(void)
+{
+	configure_clocks();
+
+	/*
+	 * Configure the memory protection unit (MPU) to allow full access to
+	 * the whole 4GB address space.
+	 */
+	writel(0, &V7M_MPU->rnr);
+	writel(0, &V7M_MPU->rbar);
+	writel((V7M_MPU_RASR_AP_RW_RW | V7M_MPU_RASR_SIZE_4GB
+		| V7M_MPU_RASR_EN), &V7M_MPU->rasr);
+	writel(V7M_MPU_CTRL_ENABLE | V7M_MPU_CTRL_HFNMIENA, &V7M_MPU->ctrl);
+
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7m/stm32f1/timer.c b/arch/arm/cpu/armv7m/stm32f1/timer.c
new file mode 100644
index 0000000..67bb87e
--- /dev/null
+++ b/arch/arm/cpu/armv7m/stm32f1/timer.c
@@ -0,0 +1,120 @@ 
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+#include <asm/arch/stm32.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define STM32_TIM2_BASE	(STM32_APB1PERIPH_BASE + 0x0000)
+
+#define RCC_APB1ENR_TIM2EN	(1 << 0)
+
+struct stm32_tim2_5 {
+	u32 cr1;
+	u32 cr2;
+	u32 smcr;
+	u32 dier;
+	u32 sr;
+	u32 egr;
+	u32 ccmr1;
+	u32 ccmr2;
+	u32 ccer;
+	u32 cnt;
+	u32 psc;
+	u32 arr;
+	u32 reserved1;
+	u32 ccr1;
+	u32 ccr2;
+	u32 ccr3;
+	u32 ccr4;
+	u32 reserved2;
+	u32 dcr;
+	u32 dmar;
+	u32 or;
+};
+
+#define TIM_CR1_CEN	(1 << 0)
+
+#define TIM_EGR_UG	(1 << 0)
+
+int timer_init(void)
+{
+	struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE;
+
+	setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_TIM2EN);
+
+	if (clock_get(CLOCK_AHB) == clock_get(CLOCK_APB1))
+		writel((clock_get(CLOCK_APB1) / CONFIG_SYS_HZ_CLOCK) - 1,
+		       &tim->psc);
+	else
+		writel(((clock_get(CLOCK_APB1) * 2) / CONFIG_SYS_HZ_CLOCK) - 1,
+		       &tim->psc);
+
+	writel(0xFFFFFFFF, &tim->arr);
+	writel(TIM_CR1_CEN, &tim->cr1);
+	setbits_le32(&tim->egr, TIM_EGR_UG);
+
+	gd->arch.tbl = 0;
+	gd->arch.tbu = 0;
+	gd->arch.lastinc = 0;
+
+	return 0;
+}
+
+ulong get_timer(ulong base)
+{
+	return (get_ticks() / (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)) - base;
+}
+
+unsigned long long get_ticks(void)
+{
+	struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE;
+	u32 now;
+
+	now = readl(&tim->cnt);
+
+	if (now >= gd->arch.lastinc)
+		gd->arch.tbl += (now - gd->arch.lastinc);
+	else
+		gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now;
+
+	gd->arch.lastinc = now;
+
+	return gd->arch.tbl;
+}
+
+void reset_timer(void)
+{
+	struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE;
+
+	gd->arch.lastinc = readl(&tim->cnt);
+	gd->arch.tbl = 0;
+}
+
+/* delay x useconds */
+void __udelay(ulong usec)
+{
+	unsigned long long start;
+
+	start = get_ticks();		/* get current timestamp */
+	while ((get_ticks() - start) < usec)
+		;			/* loop till time has passed */
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ_CLOCK;
+}
diff --git a/arch/arm/include/asm/arch-stm32f1/gpio.h b/arch/arm/include/asm/arch-stm32f1/gpio.h
new file mode 100644
index 0000000..bd5fbaf
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f1/gpio.h
@@ -0,0 +1,117 @@ 
+/*
+ * (C) Copyright 2011
+ * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _STM32_GPIO_H_
+#define _STM32_GPIO_H_
+
+enum stm32_gpio_port {
+	STM32_GPIO_PORT_A = 0,
+	STM32_GPIO_PORT_B,
+	STM32_GPIO_PORT_C,
+	STM32_GPIO_PORT_D,
+	STM32_GPIO_PORT_E,
+	STM32_GPIO_PORT_F,
+	STM32_GPIO_PORT_G,
+};
+
+enum stm32_gpio_pin {
+	STM32_GPIO_PIN_0 = 0,
+	STM32_GPIO_PIN_1,
+	STM32_GPIO_PIN_2,
+	STM32_GPIO_PIN_3,
+	STM32_GPIO_PIN_4,
+	STM32_GPIO_PIN_5,
+	STM32_GPIO_PIN_6,
+	STM32_GPIO_PIN_7,
+	STM32_GPIO_PIN_8,
+	STM32_GPIO_PIN_9,
+	STM32_GPIO_PIN_10,
+	STM32_GPIO_PIN_11,
+	STM32_GPIO_PIN_12,
+	STM32_GPIO_PIN_13,
+	STM32_GPIO_PIN_14,
+	STM32_GPIO_PIN_15
+};
+
+enum stm32_gpio_icnf {
+	STM32_GPIO_ICNF_AN = 0,
+	STM32_GPIO_ICNF_IN_FLT,
+	STM32_GPIO_ICNF_IN_PUD,
+	STM32_GPIO_ICNF_RSVD
+};
+
+enum stm32_gpio_ocnf {
+	STM32_GPIO_OCNF_GP_PP = 0,
+	STM32_GPIO_OCNF_GP_OD,
+	STM32_GPIO_OCNF_AF_PP,
+	STM32_GPIO_OCNF_AF_OD
+};
+
+enum stm32_gpio_pupd {
+	STM32_GPIO_PUPD_DOWN = 0,
+	STM32_GPIO_PUPD_UP,
+};
+
+enum stm32_gpio_mode {
+	STM32_GPIO_MODE_IN = 0,
+	STM32_GPIO_MODE_OUT_10M,
+	STM32_GPIO_MODE_OUT_2M,
+	STM32_GPIO_MODE_OUT_50M
+};
+
+enum stm32_gpio_af {
+	STM32_GPIO_AF0 = 0,
+	STM32_GPIO_AF1,
+	STM32_GPIO_AF2,
+	STM32_GPIO_AF3,
+	STM32_GPIO_AF4,
+	STM32_GPIO_AF5,
+	STM32_GPIO_AF6,
+	STM32_GPIO_AF7,
+	STM32_GPIO_AF8,
+	STM32_GPIO_AF9,
+	STM32_GPIO_AF10,
+	STM32_GPIO_AF11,
+	STM32_GPIO_AF12,
+	STM32_GPIO_AF13,
+	STM32_GPIO_AF14,
+	STM32_GPIO_AF15
+};
+
+struct stm32_gpio_dsc {
+	enum stm32_gpio_port	port;
+	enum stm32_gpio_pin	pin;
+};
+
+struct stm32_gpio_ctl {
+	enum stm32_gpio_icnf	icnf;
+	enum stm32_gpio_ocnf	ocnf;
+	enum stm32_gpio_mode	mode;
+	enum stm32_gpio_pupd	pupd;
+	enum stm32_gpio_af	af;
+};
+
+static inline unsigned stm32_gpio_to_port(unsigned gpio)
+{
+	return gpio / 16;
+}
+
+static inline unsigned stm32_gpio_to_pin(unsigned gpio)
+{
+	return gpio % 16;
+}
+
+int stm32_gpio_config(const struct stm32_gpio_dsc *gpio_dsc,
+		const struct stm32_gpio_ctl *gpio_ctl);
+int stm32_gpout_set(const struct stm32_gpio_dsc *gpio_dsc, int state);
+
+#endif /* _STM32_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-stm32f1/stm32.h b/arch/arm/include/asm/arch-stm32f1/stm32.h
new file mode 100644
index 0000000..5910d62
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f1/stm32.h
@@ -0,0 +1,115 @@ 
+/*
+ * (C) Copyright 2011
+ * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * Copyright 2015 Konsulko Group, Matt Porter <mporter@konsulko.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _MACH_STM32_H_
+#define _MACH_STM32_H_
+
+/*
+ * Peripheral memory map
+ */
+#define STM32_PERIPH_BASE	0x40000000
+#define STM32_APB1PERIPH_BASE	(STM32_PERIPH_BASE + 0x00000000)
+#define STM32_APB2PERIPH_BASE	(STM32_PERIPH_BASE + 0x00010000)
+#define STM32_AHB1PERIPH_BASE	(STM32_PERIPH_BASE + 0x00018000)
+
+#define STM32_BUS_MASK		0xFFFF0000
+
+/*
+ * Register maps
+ */
+struct stm32_des_regs {
+	u16 flash_size;
+	u16 pad1;
+	u32 pad2;
+	u32 uid0;
+	u32 uid1;
+	u32 uid2;
+};
+
+struct stm32_rcc_regs {
+	u32 cr;		/* RCC clock control */
+	u32 cfgr;	/* RCC clock configuration */
+	u32 cir;	/* RCC clock interrupt */
+	u32 apb2rstr;	/* RCC APB2 peripheral reset */
+	u32 apb1rstr;	/* RCC APB1 peripheral reset */
+	u32 ahbenr;	/* RCC AHB peripheral clock enable */
+	u32 apb2enr;	/* RCC APB2 peripheral clock enable */
+	u32 apb1enr;	/* RCC APB1 peripheral clock enable */
+	u32 bdcr;	/* RCC Backup domain control */
+	u32 csr;	/* RCC clock control & status */
+};
+
+struct stm32_pwr_regs {
+	u32 cr;
+	u32 csr;
+};
+
+struct stm32_flash_regs {
+	u32 acr;
+	u32 keyr;
+	u32 optkeyr;
+	u32 sr;
+	u32 cr;
+	u32 ar;
+	u32 rsvd1;	/* Reserved */
+	u32 obr;
+	u32 wrpr;
+	u32 rsvd2[8];	/* Reserved */
+	u32 keyr2;
+	u32 rsvd3;
+	u32 sr2;
+	u32 cr2;
+	u32 ar2;
+};
+
+/* Per bank register set for XL devices */
+struct stm32_flash_bank_regs {
+	u32 keyr;
+	u32 rsvd;	/* Reserved */
+	u32 sr;
+	u32 cr;
+	u32 ar;
+};
+
+/*
+ * Registers access macros
+ */
+#define STM32_DES_BASE		(0x1ffff7e0)
+#define STM32_DES		((struct stm32_des_regs *)STM32_DES_BASE)
+
+#define STM32_RCC_BASE		(STM32_AHB1PERIPH_BASE + 0x9000)
+#define STM32_RCC		((struct stm32_rcc_regs *)STM32_RCC_BASE)
+
+#define STM32_PWR_BASE		(STM32_APB1PERIPH_BASE + 0x7000)
+#define STM32_PWR		((struct stm32_pwr_regs *)STM32_PWR_BASE)
+
+#define STM32_FLASH_BASE	(STM32_AHB1PERIPH_BASE + 0xa000)
+#define STM32_FLASH		((struct stm32_flash_regs *)STM32_FLASH_BASE)
+
+#define STM32_FLASH_SR_BSY		(1 << 0)
+
+#define STM32_FLASH_CR_PG		(1 << 0)
+#define STM32_FLASH_CR_PER		(1 << 1)
+#define STM32_FLASH_CR_STRT		(1 << 6)
+#define STM32_FLASH_CR_LOCK		(1 << 7)
+
+enum clock {
+	CLOCK_CORE,
+	CLOCK_AHB,
+	CLOCK_APB1,
+	CLOCK_APB2
+};
+
+int configure_clocks(void);
+unsigned long clock_get(enum clock clck);
+
+#endif /* _MACH_STM32_H_ */
diff --git a/include/flash.h b/include/flash.h
index 48aa3a5..5754cf9 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -460,6 +460,7 @@  extern flash_info_t *flash_get_info(ulong base);
 #define FLASH_S29GL128N 0x00F1		/* Spansion S29GL128N			*/
 
 #define FLASH_STM32F4	0x00F2		/* STM32F4 Embedded Flash */
+#define FLASH_STM32F1	0x00F3		/* STM32F1 Embedded Flash */
 
 #define FLASH_UNKNOWN	0xFFFF		/* unknown flash type			*/