@@ -2781,6 +2781,103 @@ static int mlx4_slaves_closest_port(struct mlx4_dev *dev, int slave, int port)
return port;
}
+static int mlx4_set_vport_qos(struct mlx4_priv *priv, int slave, int port,
+ int max_tx_rate)
+{
+ int i;
+ int err;
+ struct mlx4_qos_manager *port_qos;
+ struct mlx4_dev *dev = &priv->dev;
+ struct mlx4_vport_qos_param vpp_qos[MLX4_NUM_UP];
+
+ port_qos = &priv->mfunc.master.qos_ctl[port];
+ memset(vpp_qos, 0, sizeof(struct mlx4_vport_qos_param) * MLX4_NUM_UP);
+
+ if (slave > port_qos->num_of_qos_vfs) {
+ mlx4_info(dev, "No availible VPP resources for this VF\n");
+ return -EINVAL;
+ }
+
+ /* Query for default QoS values from Vport 0 is needed */
+ err = mlx4_SET_VPORT_QOS_get(dev, port, 0, vpp_qos);
+ if (err) {
+ mlx4_info(dev, "Failed to query Vport 0 QoS values\n");
+ return err;
+ }
+
+ for (i = 0; i < MLX4_NUM_UP; i++) {
+ if (test_bit(i, port_qos->priority_bm) && max_tx_rate) {
+ vpp_qos[i].max_avg_bw = max_tx_rate;
+ vpp_qos[i].enable = 1;
+ } else {
+ /* if user supplied tx_rate == 0, meaning no rate limit
+ * configuration is required. so we are leaving the
+ * value of max_avg_bw as queried from Vport 0.
+ */
+ vpp_qos[i].enable = 0;
+ }
+ }
+
+ err = mlx4_SET_VPORT_QOS_set(dev, port, slave, vpp_qos);
+ if (err) {
+ mlx4_info(dev, "Failed to set Vport %d QoS values\n", slave);
+ return err;
+ }
+
+ return 0;
+}
+
+static bool mlx4_is_vf_vst_and_prio_qos(struct mlx4_dev *dev, int port,
+ struct mlx4_vport_state *vf_admin)
+{
+ struct mlx4_qos_manager *info;
+ struct mlx4_priv *priv = mlx4_priv(dev);
+
+ if (!mlx4_is_master(dev) ||
+ !(dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_QOS_VPP))
+ return false;
+
+ info = &priv->mfunc.master.qos_ctl[port];
+
+ if (vf_admin->default_vlan != MLX4_VGT &&
+ test_bit(vf_admin->default_qos, info->priority_bm))
+ return true;
+
+ return false;
+}
+
+static bool mlx4_valid_vf_state_change(struct mlx4_dev *dev, int port,
+ struct mlx4_vport_state *vf_admin,
+ int vlan, int qos)
+{
+ struct mlx4_vport_state dummy_admin = {0};
+
+ if (!mlx4_is_vf_vst_and_prio_qos(dev, port, vf_admin) ||
+ !vf_admin->tx_rate)
+ return true;
+
+ dummy_admin.default_qos = qos;
+ dummy_admin.default_vlan = vlan;
+
+ /* VF wants to move to other VST state which is valid with current
+ * rate limit. Either differnt default vlan in VST or other
+ * supported QoS priority. Otherwise we don't allow this change when
+ * the TX rate is still configured.
+ */
+ if (mlx4_is_vf_vst_and_prio_qos(dev, port, &dummy_admin))
+ return true;
+
+ mlx4_info(dev, "Cannot change VF state to %s while rate is set\n",
+ (vlan == MLX4_VGT) ? "VGT" : "VST");
+
+ if (vlan != MLX4_VGT)
+ mlx4_info(dev, "VST priority %d not supported for QoS\n", qos);
+
+ mlx4_info(dev, "Please set rate to 0 prior to this VF state change\n");
+
+ return false;
+}
+
int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, u64 mac)
{
struct mlx4_priv *priv = mlx4_priv(dev);
@@ -2824,12 +2921,22 @@ int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, u16 vlan, u8 qos)
port = mlx4_slaves_closest_port(dev, slave, port);
vf_admin = &priv->mfunc.master.vf_admin[slave].vport[port];
+ if (!mlx4_valid_vf_state_change(dev, port, vf_admin, vlan, qos))
+ return -EPERM;
+
if ((0 == vlan) && (0 == qos))
vf_admin->default_vlan = MLX4_VGT;
else
vf_admin->default_vlan = vlan;
vf_admin->default_qos = qos;
+ /* If rate was configured prior to VST, we saved the configured rate
+ * in vf_admin->rate and now, if priority supported we enforce the QoS
+ */
+ if (mlx4_is_vf_vst_and_prio_qos(dev, port, vf_admin) &&
+ vf_admin->tx_rate)
+ vf_admin->qos_vport = slave;
+
if (mlx4_master_immediate_activate_vlan_qos(priv, slave, port))
mlx4_info(dev,
"updating vf %d port %d config will take effect on next VF restart\n",
@@ -2838,6 +2945,69 @@ int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, u16 vlan, u8 qos)
}
EXPORT_SYMBOL_GPL(mlx4_set_vf_vlan);
+int mlx4_set_vf_rate(struct mlx4_dev *dev, int port, int vf, int min_tx_rate,
+ int max_tx_rate)
+{
+ int err;
+ int slave;
+ struct mlx4_vport_state *vf_admin;
+ struct mlx4_priv *priv = mlx4_priv(dev);
+
+ if (!mlx4_is_master(dev) ||
+ !(dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_QOS_VPP))
+ return -EPROTONOSUPPORT;
+
+ if (min_tx_rate) {
+ mlx4_info(dev, "Minimum BW share not supported\n");
+ return -EPROTONOSUPPORT;
+ }
+
+ slave = mlx4_get_slave_indx(dev, vf);
+ if (slave < 0)
+ return -EINVAL;
+
+ port = mlx4_slaves_closest_port(dev, slave, port);
+ vf_admin = &priv->mfunc.master.vf_admin[slave].vport[port];
+
+ err = mlx4_set_vport_qos(priv, slave, port, max_tx_rate);
+ if (err) {
+ mlx4_info(dev, "vf %d failed to set rate %d\n", vf,
+ max_tx_rate);
+ return err;
+ }
+
+ vf_admin->tx_rate = max_tx_rate;
+ /* if VF is not in supported mode (VST with supported prio),
+ * we do not change vport configuration for its QPs, but save
+ * the rate, so it will be enforced when it moves to supported
+ * mode next time.
+ */
+ if (!mlx4_is_vf_vst_and_prio_qos(dev, port, vf_admin)) {
+ mlx4_info(dev,
+ "rate set for VF %d when not in valid state\n", vf);
+
+ if (vf_admin->default_vlan != MLX4_VGT)
+ mlx4_info(dev, "VST priority not supported by QoS\n");
+ else
+ mlx4_info(dev, "VF in VGT mode (needed VST)\n");
+
+ mlx4_info(dev,
+ "rate %d take affect when VF moves to valid state\n",
+ max_tx_rate);
+ return 0;
+ }
+
+ /* If user sets rate 0 assigning default vport for its QPs */
+ vf_admin->qos_vport = max_tx_rate ? slave : MLX4_VPP_DEFAULT_VPORT;
+
+ if (priv->mfunc.master.slave_state[slave].active &&
+ dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_UPDATE_QP)
+ mlx4_master_immediate_activate_vlan_qos(priv, slave, port);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mlx4_set_vf_rate);
+
/* mlx4_get_slave_default_vlan -
* return true if VST ( default vlan)
* if VST, will return vlan & qos (if not NULL)
@@ -2911,7 +3081,12 @@ int mlx4_get_vf_config(struct mlx4_dev *dev, int port, int vf, struct ifla_vf_in
ivf->vlan = s_info->default_vlan;
ivf->qos = s_info->default_qos;
- ivf->max_tx_rate = s_info->tx_rate;
+
+ if (mlx4_is_vf_vst_and_prio_qos(dev, port, s_info))
+ ivf->max_tx_rate = s_info->tx_rate;
+ else
+ ivf->max_tx_rate = 0;
+
ivf->min_tx_rate = 0;
ivf->spoofchk = s_info->spoofchk;
ivf->linkstate = s_info->link_state;
@@ -2240,6 +2240,16 @@ static int mlx4_en_set_vf_vlan(struct net_device *dev, int vf, u16 vlan, u8 qos)
return mlx4_set_vf_vlan(mdev->dev, en_priv->port, vf, vlan, qos);
}
+static int mlx4_en_set_vf_rate(struct net_device *dev, int vf, int min_tx_rate,
+ int max_tx_rate)
+{
+ struct mlx4_en_priv *en_priv = netdev_priv(dev);
+ struct mlx4_en_dev *mdev = en_priv->mdev;
+
+ return mlx4_set_vf_rate(mdev->dev, en_priv->port, vf, min_tx_rate,
+ max_tx_rate);
+}
+
static int mlx4_en_set_vf_spoofchk(struct net_device *dev, int vf, bool setting)
{
struct mlx4_en_priv *en_priv = netdev_priv(dev);
@@ -2458,6 +2468,7 @@ static const struct net_device_ops mlx4_netdev_ops_master = {
.ndo_vlan_rx_kill_vid = mlx4_en_vlan_rx_kill_vid,
.ndo_set_vf_mac = mlx4_en_set_vf_mac,
.ndo_set_vf_vlan = mlx4_en_set_vf_vlan,
+ .ndo_set_vf_rate = mlx4_en_set_vf_rate,
.ndo_set_vf_spoofchk = mlx4_en_set_vf_spoofchk,
.ndo_set_vf_link_state = mlx4_en_set_vf_link_state,
.ndo_get_vf_config = mlx4_en_get_vf_config,
@@ -296,6 +296,8 @@ void mlx4_free_cmd_mailbox(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbo
u32 mlx4_comm_get_version(void);
int mlx4_set_vf_mac(struct mlx4_dev *dev, int port, int vf, u64 mac);
int mlx4_set_vf_vlan(struct mlx4_dev *dev, int port, int vf, u16 vlan, u8 qos);
+int mlx4_set_vf_rate(struct mlx4_dev *dev, int port, int vf, int min_tx_rate,
+ int max_tx_rate);
int mlx4_set_vf_spoofchk(struct mlx4_dev *dev, int port, int vf, bool setting);
int mlx4_get_vf_config(struct mlx4_dev *dev, int port, int vf, struct ifla_vf_info *ivf);
int mlx4_set_vf_link_state(struct mlx4_dev *dev, int port, int vf, int link_state);