| Message ID | 20150401074000.CD2CD2203CD@puck.mtv.corp.google.com |
|---|---|
| State | Accepted, archived |
| Delegated to: | David Miller |
| Headers | show |
From: Petri Gynther <pgynther@google.com> Date: Wed, 1 Apr 2015 00:40:00 -0700 (PDT) > Currently, MoCA fixed PHYs are always in link-up state, regardless of > whether the link is actually up or not. > > Add code to properly detect MoCA link state changes and to reflect the > new state in MoCA fixed PHY. Only GENET V3 and V4 MACs are capable of > detecting MoCA link state changes. > > The code works as follows: > 1. GENET MAC detects MoCA link state change and issues UMAC_IRQ_LINK_UP > or UMAC_IRQ_LINK_DOWN interrupt. > 2. Link up/down interrupt is processed in bcmgenet_irq_task(), which > calls phy_mac_interrupt(). > 3. phy_mac_interrupt() updates the fixed PHY phydev->link and kicks > the PHY state machine. > 4. PHY state machine proceeds to read the fixed PHY link status > register. > 5. When the fixed PHY link status register is being read, the new > function bcmgenet_fixed_phy_link_update() gets called. It copies > the fixed PHY phydev->link value to the fixed PHY status->link. > 6. PHY state machine receives the new link state of the fixed PHY. > 7. MoCA fixed PHY link state now correctly reflects the real MoCA > hardware link state. > > Signed-off-by: Petri Gynther <pgynther@google.com> Applied, thanks. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index f7855a6..6043734 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1734,6 +1734,9 @@ static int init_umac(struct bcmgenet_priv *priv) } else if (priv->ext_phy) { int0_enable |= UMAC_IRQ_LINK_EVENT; } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) { + if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET) + int0_enable |= UMAC_IRQ_LINK_EVENT; + reg = bcmgenet_bp_mc_get(priv); reg |= BIT(priv->hw_params->bp_in_en_shift); @@ -2926,7 +2929,8 @@ static struct bcmgenet_hw_params bcmgenet_hw_params[] = { .rdma_offset = 0x10000, .tdma_offset = 0x11000, .words_per_bd = 2, - .flags = GENET_HAS_EXT | GENET_HAS_MDIO_INTR, + .flags = GENET_HAS_EXT | GENET_HAS_MDIO_INTR | + GENET_HAS_MOCA_LINK_DET, }, [GENET_V4] = { .tx_queues = 4, @@ -2944,7 +2948,8 @@ static struct bcmgenet_hw_params bcmgenet_hw_params[] = { .rdma_offset = 0x2000, .tdma_offset = 0x4000, .words_per_bd = 3, - .flags = GENET_HAS_40BITS | GENET_HAS_EXT | GENET_HAS_MDIO_INTR, + .flags = GENET_HAS_40BITS | GENET_HAS_EXT | + GENET_HAS_MDIO_INTR | GENET_HAS_MOCA_LINK_DET, }, }; diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h index ddaa40c..6f2887a 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h @@ -508,6 +508,7 @@ enum bcmgenet_version { #define GENET_HAS_40BITS (1 << 0) #define GENET_HAS_EXT (1 << 1) #define GENET_HAS_MDIO_INTR (1 << 2) +#define GENET_HAS_MOCA_LINK_DET (1 << 3) /* BCMGENET hardware parameters, keep this structure nicely aligned * since it is going to be used in hot paths diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c index 6d3b66a..e7651b3 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -462,6 +462,15 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv) return 0; } +static int bcmgenet_fixed_phy_link_update(struct net_device *dev, + struct fixed_phy_status *status) +{ + if (dev && dev->phydev && status) + status->link = dev->phydev->link; + + return 0; +} + static int bcmgenet_mii_pd_init(struct bcmgenet_priv *priv) { struct device *kdev = &priv->pdev->dev; @@ -513,6 +522,13 @@ static int bcmgenet_mii_pd_init(struct bcmgenet_priv *priv) dev_err(kdev, "failed to register fixed PHY device\n"); return -ENODEV; } + + if (priv->hw_params->flags & GENET_HAS_MOCA_LINK_DET) { + ret = fixed_phy_set_link_update( + phydev, bcmgenet_fixed_phy_link_update); + if (!ret) + phydev->link = 0; + } } priv->phydev = phydev;
Currently, MoCA fixed PHYs are always in link-up state, regardless of whether the link is actually up or not. Add code to properly detect MoCA link state changes and to reflect the new state in MoCA fixed PHY. Only GENET V3 and V4 MACs are capable of detecting MoCA link state changes. The code works as follows: 1. GENET MAC detects MoCA link state change and issues UMAC_IRQ_LINK_UP or UMAC_IRQ_LINK_DOWN interrupt. 2. Link up/down interrupt is processed in bcmgenet_irq_task(), which calls phy_mac_interrupt(). 3. phy_mac_interrupt() updates the fixed PHY phydev->link and kicks the PHY state machine. 4. PHY state machine proceeds to read the fixed PHY link status register. 5. When the fixed PHY link status register is being read, the new function bcmgenet_fixed_phy_link_update() gets called. It copies the fixed PHY phydev->link value to the fixed PHY status->link. 6. PHY state machine receives the new link state of the fixed PHY. 7. MoCA fixed PHY link state now correctly reflects the real MoCA hardware link state. Signed-off-by: Petri Gynther <pgynther@google.com> --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 9 +++++++-- drivers/net/ethernet/broadcom/genet/bcmgenet.h | 1 + drivers/net/ethernet/broadcom/genet/bcmmii.c | 16 ++++++++++++++++ 3 files changed, 24 insertions(+), 2 deletions(-)