similarity index 100%
rename from board/freescale/imx6sabresd/create-boot-sd.sh
rename to board/freescale/create-boot-sd.sh
@@ -1 +1 @@
-../imx6sabresd/create-boot-sd.sh
\ No newline at end of file
+../imx6sabre/create-boot-sd.sh
\ No newline at end of file
similarity index 100%
rename from board/freescale/imx6sabresd/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
rename to board/freescale/imx6sabre/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
similarity index 82%
rename from board/freescale/imx6sabresd/readme.txt
rename to board/freescale/imx6sabre/readme.txt
@@ -11,12 +11,12 @@ http://cache.freescale.com/files/32bit/doc/quick_start_guide/SABRESDB_IMX6_QSG.p
Build
=====
-First, configure Buildroot for your SABRESD board.
-For i.MX6Q:
+First, configure Buildroot for your SABRE board.
+For i.MX6Q SABRE SD board:
make freescale_imx6qsabresd_defconfig
-For i.MX6DL:
+For i.MX6DL SABRE SD board:
make freescale_imx6dlsabresd_defconfig
@@ -44,13 +44,16 @@ and copy the bootloader, kernel, DTBs and root filesystem as needed.
*** WARNING! The script will destroy all the card content. Use with care! ***
- ./board/freescale/imx6sabresd/create-boot-sd.sh <your-sd-device>
+ ./board/freescale/create-boot-sd.sh <your-sd-device>
-Boot the SABRESD board
-======================
+Boot the SABRE board
+====================
-To boot your newly created system (refer to the SABRESD Quick Start Guide for
-guidance):
+SABRE SD
+--------
+
+To boot your newly created system on a SABRE SD Board (refer to the SABRE SD
+Quick Start Guide for guidance):
- insert the SD card in the SD3 slot of the board;
- locate the BOOT dip switches (SW6), set dips 2 and 7 to ON, all others to OFF;
- connect a Micro USB cable to Debug Port and connect using a terminal emulator
@@ -3,7 +3,7 @@ BR2_arm=y
BR2_cortex_a9=y
# patches
-BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabresd/patches"
+BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
# toolchain
BR2_KERNEL_HEADERS_VERSION=y
@@ -3,7 +3,7 @@ BR2_arm=y
BR2_cortex_a9=y
# patches
-BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabresd/patches"
+BR2_GLOBAL_PATCH_DIR="board/freescale/imx6sabre/patches"
# toolchain
BR2_KERNEL_HEADERS_VERSION=y