@@ -2030,7 +2030,8 @@ static void ixgbevf_init_last_counter_stats(struct ixgbevf_adapter *adapter)
static void ixgbevf_negotiate_api(struct ixgbevf_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
- int api[] = { ixgbe_mbox_api_11,
+ int api[] = { ixgbe_mbox_api_12,
+ ixgbe_mbox_api_11,
ixgbe_mbox_api_10,
ixgbe_mbox_api_unknown };
int err = 0, idx = 0;
@@ -2332,6 +2333,7 @@ static void ixgbevf_set_num_queues(struct ixgbevf_adapter *adapter)
switch (hw->api_version) {
case ixgbe_mbox_api_11:
+ case ixgbe_mbox_api_12:
adapter->num_rx_queues = rss;
adapter->num_tx_queues = rss;
default:
@@ -3712,6 +3714,7 @@ static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu)
switch (adapter->hw.api_version) {
case ixgbe_mbox_api_11:
+ case ixgbe_mbox_api_12:
max_possible_frame = IXGBE_MAX_JUMBO_FRAME_SIZE;
break;
default:
@@ -83,6 +83,7 @@ enum ixgbe_pfvf_api_rev {
ixgbe_mbox_api_10, /* API version 1.0, linux/freebsd VF driver */
ixgbe_mbox_api_20, /* API version 2.0, solaris Phase1 VF driver */
ixgbe_mbox_api_11, /* API version 1.1, linux/freebsd VF driver */
+ ixgbe_mbox_api_12, /* API version 1.2, linux/freebsd VF driver */
/* This value should always be last */
ixgbe_mbox_api_unknown, /* indicates that API version is not known */
};
@@ -107,6 +108,9 @@ enum ixgbe_pfvf_api_rev {
#define IXGBE_VF_TRANS_VLAN 3 /* Indication of port VLAN */
#define IXGBE_VF_DEF_QUEUE 4 /* Default queue offset */
+/* mailbox API, version 1.2 VF requests */
+#define IXGBE_VF_GET_RETA 0x0a /* VF request for RETA */
+
/* length of permanent address message returned from PF */
#define IXGBE_VF_PERMADDR_MSG_LEN 4
/* word in permanent address message with the current multicast type */
@@ -256,6 +256,81 @@ static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
return ret_val;
}
+static inline int ixgbevf_get_reta_locked(struct ixgbe_hw *hw, u32 *msgbuf,
+ u32 *reta)
+{
+ int err, i, j;
+ u32 *hw_reta = &msgbuf[1];
+
+ /* We have to use a mailbox for 82599 and x540 devices only.
+ * For these devices RETA has 128 entries.
+ * Also these VFs support up to 4 RSS queues. Therefore PF will compress
+ * 16 RETA entries in each DWORD giving 2 bits to each entry.
+ */
+ int dwords = 128 / 16;
+
+ msgbuf[0] = IXGBE_VF_GET_RETA;
+
+ err = hw->mbx.ops.write_posted(hw, msgbuf, 1);
+
+ if (err)
+ return err;
+
+ err = hw->mbx.ops.read_posted(hw, msgbuf, dwords + 1);
+
+ if (err)
+ return err;
+
+ msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ /* If the operation has been refused by a PF return -EPERM */
+ if (msgbuf[0] == (IXGBE_VF_GET_RETA | IXGBE_VT_MSGTYPE_NACK))
+ return -EPERM;
+
+ /* If we didn't get an ACK there must have been
+ * some sort of mailbox error so we should treat it
+ * as such.
+ */
+ if (msgbuf[0] != (IXGBE_VF_GET_RETA | IXGBE_VT_MSGTYPE_ACK))
+ return IXGBE_ERR_MBX;
+
+ for (i = 0; i < dwords; i++)
+ for (j = 0; j < 16; j++)
+ reta[i * 16 + j] = (hw_reta[i] >> (2 * j)) & 0x3;
+
+ return 0;
+}
+
+/**
+ * ixgbevf_get_reta - get the RSS redirection table (RETA) contents.
+ * @adapter: pointer to the port handle
+ * @reta: buffer to fill with RETA contents.
+ *
+ * The "reta" buffer should be big enough to contain 32 registers.
+ *
+ * Returns: 0 on success.
+ * if API doesn't support this operation - (-EPERM).
+ */
+int ixgbevf_get_reta(struct ixgbevf_adapter *adapter, u32 *reta)
+{
+ int err;
+ u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
+
+ /* We support the RSS querying for 82599 and x540 devices only.
+ * Thus return an error if API doesn't support RETA querying or querying
+ * is not supported for this device type.
+ */
+ if (adapter->hw.api_version != ixgbe_mbox_api_12 ||
+ adapter->hw.mac.type >= ixgbe_mac_X550_vf)
+ return -EPERM;
+
+ spin_lock_bh(&adapter->mbx_lock);
+ err = ixgbevf_get_reta_locked(&adapter->hw, msgbuf, reta);
+ spin_unlock_bh(&adapter->mbx_lock);
+
+ return err;
+}
+
/**
* ixgbevf_set_rar_vf - set device MAC address
* @hw: pointer to hardware structure
@@ -545,6 +620,7 @@ int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
/* do nothing if API doesn't support ixgbevf_get_queues */
switch (hw->api_version) {
case ixgbe_mbox_api_11:
+ case ixgbe_mbox_api_12:
break;
default:
return 0;
@@ -38,6 +38,7 @@
#include "mbx.h"
struct ixgbe_hw;
+struct ixgbevf_adapter;
/* iterator type for walking multicast address lists */
typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
@@ -210,4 +211,5 @@ void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size);
int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api);
int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
unsigned int *default_tc);
+int ixgbevf_get_reta(struct ixgbevf_adapter *adapter, u32 *reta);
#endif /* __IXGBE_VF_H__ */
We will currently support only 82599 and x540 deviced. Support for other devices will be added later. - Added a new API version support. - Added the query implementation in the ixgbevf. Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com> --- New in v9: - Reduce the support to 82599 and x540 devices only. - Improvements in RETA query code: - Implement a "compression" of VF's RETA contents: pass only 2 bits per-entry. - RETA querying is done in a single mailbox operation thanks to compression. New in v8: - Protect mailbox with a spinlock. New in v7: - Add ixgbe_mbox_api_12 case in ixgbevf_set_num_queues(). - Properly expand HW RETA into the ethtool buffer. New in v6: - Add a proper return code when an operation is blocked by PF. New in v3: - Adjusted to the new interface IXGBE_VF_GET_RETA command. - Added a proper support for x550 devices. New in v1 (compared to RFC): - Use "if-else" statement instead of a "switch-case" for a single option case (in ixgbevf_get_reta()). --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 5 +- drivers/net/ethernet/intel/ixgbevf/mbx.h | 4 ++ drivers/net/ethernet/intel/ixgbevf/vf.c | 76 +++++++++++++++++++++++ drivers/net/ethernet/intel/ixgbevf/vf.h | 2 + 4 files changed, 86 insertions(+), 1 deletion(-)