| Message ID | 1427348529-7060-4-git-send-email-gwshan@linux.vnet.ibm.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Michael Ellerman |
| Headers | show |
On Thu, 2015-03-26 at 16:42 +1100, Gavin Shan wrote: > The patch adds one more EEH sub-command (VFIO_EEH_PE_INJECT_ERR) > to inject the specified EEH error, which is represented by > (struct vfio_eeh_pe_err), to the indicated PE for testing purpose. > > Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> > Reviewed-by: David Gibson <david@gibson.dropbear.id.au> > --- > Documentation/vfio.txt | 12 ++++++++++++ > drivers/vfio/vfio_spapr_eeh.c | 10 ++++++++++ > include/uapi/linux/vfio.h | 14 +++++++++++++- > 3 files changed, 35 insertions(+), 1 deletion(-) > > diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt > index 96978ec..4c746a7 100644 > --- a/Documentation/vfio.txt > +++ b/Documentation/vfio.txt > @@ -385,6 +385,18 @@ The code flow from the example above should be slightly changed: > > .... > > + /* Inject EEH error, which is expected to be caused by 32-bits > + * config load. > + */ > + pe_op.op = VFIO_EEH_PE_INJECT_ERR; > + pe_op.err.type = EEH_ERR_TYPE_32; > + pe_op.err.func = EEH_ERR_FUNC_LD_CFG_ADDR; > + pe_op.err.addr = 0ul; > + pe_op.err.mask = 0ul; > + ioctl(container, VFIO_EEH_PE_OP, &pe_op); > + > + .... > + > /* When 0xFF's returned from reading PCI config space or IO BARs > * of the PCI device. Check the PE's state to see if that has been > * frozen. > diff --git a/drivers/vfio/vfio_spapr_eeh.c b/drivers/vfio/vfio_spapr_eeh.c > index 5fa42db..38edeb4 100644 > --- a/drivers/vfio/vfio_spapr_eeh.c > +++ b/drivers/vfio/vfio_spapr_eeh.c > @@ -85,6 +85,16 @@ long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group, > case VFIO_EEH_PE_CONFIGURE: > ret = eeh_pe_configure(pe); > break; > + case VFIO_EEH_PE_INJECT_ERR: > + minsz = offsetofend(struct vfio_eeh_pe_op, err.mask); > + if (op.argsz < minsz) > + return -EINVAL; > + if (copy_from_user(&op, (void __user *)arg, minsz)) > + return -EFAULT; > + > + ret = eeh_pe_inject_err(pe, op.err.type, op.err.func, > + op.err.addr, op.err.mask); > + break; > default: > ret = -EINVAL; > } > diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h > index 82889c3..d81c17f 100644 > --- a/include/uapi/linux/vfio.h > +++ b/include/uapi/linux/vfio.h > @@ -468,12 +468,23 @@ struct vfio_iommu_spapr_tce_info { > * - unfreeze IO/DMA for frozen PE; > * - read PE state; > * - reset PE; > - * - configure PE. > + * - configure PE; > + * - inject EEH error. > */ > +struct vfio_eeh_pe_err { > + __u32 type; > + __u32 func; > + __u64 addr; > + __u64 mask; > +}; > + > struct vfio_eeh_pe_op { > __u32 argsz; > __u32 flags; > __u32 op; > + union { > + struct vfio_eeh_pe_err err; > + }; > }; > > #define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */ > @@ -490,6 +501,7 @@ struct vfio_eeh_pe_op { > #define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */ > #define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */ > #define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */ > +#define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error */ > > #define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21) > I assume you want this to go in through the PPC tree, so Acked-by: Alex Williamson <alex.williamson@redhat.com>
On Tue, Mar 31, 2015 at 01:13:26PM -0600, Alex Williamson wrote: >On Thu, 2015-03-26 at 16:42 +1100, Gavin Shan wrote: >> The patch adds one more EEH sub-command (VFIO_EEH_PE_INJECT_ERR) >> to inject the specified EEH error, which is represented by >> (struct vfio_eeh_pe_err), to the indicated PE for testing purpose. >> >> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> >> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> >> --- >> Documentation/vfio.txt | 12 ++++++++++++ >> drivers/vfio/vfio_spapr_eeh.c | 10 ++++++++++ >> include/uapi/linux/vfio.h | 14 +++++++++++++- >> 3 files changed, 35 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt >> index 96978ec..4c746a7 100644 >> --- a/Documentation/vfio.txt >> +++ b/Documentation/vfio.txt >> @@ -385,6 +385,18 @@ The code flow from the example above should be slightly changed: >> >> .... >> >> + /* Inject EEH error, which is expected to be caused by 32-bits >> + * config load. >> + */ >> + pe_op.op = VFIO_EEH_PE_INJECT_ERR; >> + pe_op.err.type = EEH_ERR_TYPE_32; >> + pe_op.err.func = EEH_ERR_FUNC_LD_CFG_ADDR; >> + pe_op.err.addr = 0ul; >> + pe_op.err.mask = 0ul; >> + ioctl(container, VFIO_EEH_PE_OP, &pe_op); >> + >> + .... >> + >> /* When 0xFF's returned from reading PCI config space or IO BARs >> * of the PCI device. Check the PE's state to see if that has been >> * frozen. >> diff --git a/drivers/vfio/vfio_spapr_eeh.c b/drivers/vfio/vfio_spapr_eeh.c >> index 5fa42db..38edeb4 100644 >> --- a/drivers/vfio/vfio_spapr_eeh.c >> +++ b/drivers/vfio/vfio_spapr_eeh.c >> @@ -85,6 +85,16 @@ long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group, >> case VFIO_EEH_PE_CONFIGURE: >> ret = eeh_pe_configure(pe); >> break; >> + case VFIO_EEH_PE_INJECT_ERR: >> + minsz = offsetofend(struct vfio_eeh_pe_op, err.mask); >> + if (op.argsz < minsz) >> + return -EINVAL; >> + if (copy_from_user(&op, (void __user *)arg, minsz)) >> + return -EFAULT; >> + >> + ret = eeh_pe_inject_err(pe, op.err.type, op.err.func, >> + op.err.addr, op.err.mask); >> + break; >> default: >> ret = -EINVAL; >> } >> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h >> index 82889c3..d81c17f 100644 >> --- a/include/uapi/linux/vfio.h >> +++ b/include/uapi/linux/vfio.h >> @@ -468,12 +468,23 @@ struct vfio_iommu_spapr_tce_info { >> * - unfreeze IO/DMA for frozen PE; >> * - read PE state; >> * - reset PE; >> - * - configure PE. >> + * - configure PE; >> + * - inject EEH error. >> */ >> +struct vfio_eeh_pe_err { >> + __u32 type; >> + __u32 func; >> + __u64 addr; >> + __u64 mask; >> +}; >> + >> struct vfio_eeh_pe_op { >> __u32 argsz; >> __u32 flags; >> __u32 op; >> + union { >> + struct vfio_eeh_pe_err err; >> + }; >> }; >> >> #define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */ >> @@ -490,6 +501,7 @@ struct vfio_eeh_pe_op { >> #define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */ >> #define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */ >> #define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */ >> +#define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error */ >> >> #define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21) >> > >I assume you want this to go in through the PPC tree, so > >Acked-by: Alex Williamson <alex.williamson@redhat.com> > Thanks, Alex.W. Yes, It can go via PPC tree. Thanks, Gavin
diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt index 96978ec..4c746a7 100644 --- a/Documentation/vfio.txt +++ b/Documentation/vfio.txt @@ -385,6 +385,18 @@ The code flow from the example above should be slightly changed: .... + /* Inject EEH error, which is expected to be caused by 32-bits + * config load. + */ + pe_op.op = VFIO_EEH_PE_INJECT_ERR; + pe_op.err.type = EEH_ERR_TYPE_32; + pe_op.err.func = EEH_ERR_FUNC_LD_CFG_ADDR; + pe_op.err.addr = 0ul; + pe_op.err.mask = 0ul; + ioctl(container, VFIO_EEH_PE_OP, &pe_op); + + .... + /* When 0xFF's returned from reading PCI config space or IO BARs * of the PCI device. Check the PE's state to see if that has been * frozen. diff --git a/drivers/vfio/vfio_spapr_eeh.c b/drivers/vfio/vfio_spapr_eeh.c index 5fa42db..38edeb4 100644 --- a/drivers/vfio/vfio_spapr_eeh.c +++ b/drivers/vfio/vfio_spapr_eeh.c @@ -85,6 +85,16 @@ long vfio_spapr_iommu_eeh_ioctl(struct iommu_group *group, case VFIO_EEH_PE_CONFIGURE: ret = eeh_pe_configure(pe); break; + case VFIO_EEH_PE_INJECT_ERR: + minsz = offsetofend(struct vfio_eeh_pe_op, err.mask); + if (op.argsz < minsz) + return -EINVAL; + if (copy_from_user(&op, (void __user *)arg, minsz)) + return -EFAULT; + + ret = eeh_pe_inject_err(pe, op.err.type, op.err.func, + op.err.addr, op.err.mask); + break; default: ret = -EINVAL; } diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h index 82889c3..d81c17f 100644 --- a/include/uapi/linux/vfio.h +++ b/include/uapi/linux/vfio.h @@ -468,12 +468,23 @@ struct vfio_iommu_spapr_tce_info { * - unfreeze IO/DMA for frozen PE; * - read PE state; * - reset PE; - * - configure PE. + * - configure PE; + * - inject EEH error. */ +struct vfio_eeh_pe_err { + __u32 type; + __u32 func; + __u64 addr; + __u64 mask; +}; + struct vfio_eeh_pe_op { __u32 argsz; __u32 flags; __u32 op; + union { + struct vfio_eeh_pe_err err; + }; }; #define VFIO_EEH_PE_DISABLE 0 /* Disable EEH functionality */ @@ -490,6 +501,7 @@ struct vfio_eeh_pe_op { #define VFIO_EEH_PE_RESET_HOT 6 /* Assert hot reset */ #define VFIO_EEH_PE_RESET_FUNDAMENTAL 7 /* Assert fundamental reset */ #define VFIO_EEH_PE_CONFIGURE 8 /* PE configuration */ +#define VFIO_EEH_PE_INJECT_ERR 9 /* Inject EEH error */ #define VFIO_EEH_PE_OP _IO(VFIO_TYPE, VFIO_BASE + 21)