| Message ID | 1427118008-6613-1-git-send-email-github@wilberforce.co.nz |
|---|---|
| State | Superseded |
| Headers | show |
Hi Rhys, On Tue, Mar 24, 2015 at 02:40:08AM +1300, Rhys Williams wrote: > This package adds the userspace tools LIRC - Linux remote control. > The Kernel package will need to be selected. In this case the package should depend on BR2_LINUX_KERNEL. But are you sure of this? The text at http://www.lirc.org/html/install.html#compiling says: As of 0.9.1+, lirc uses the kernel modules from the official kernel. Some of these are formerly lirc modules which are now part of the kernel. Thus, building lirc does not involve building kernel modules (as it used to be). > Thanks to Baruch for help so far. This line should not be part of the commit log that is kept forever in the Buildroot git history. You may add "personal" comments below the --- separator... > Signed-off-by: Rhys Williams <github@wilberforce.co.nz> > --- ... here. > package/Config.in | 1 + > package/lirc-tools/Config.in | 15 +++++++++++++++ > package/lirc-tools/S25lircd | 38 ++++++++++++++++++++++++++++++++++++++ > package/lirc-tools/lirc-tools.hash | 2 ++ > package/lirc-tools/lirc-tools.mk | 20 ++++++++++++++++++++ > 5 files changed, 76 insertions(+) > create mode 100644 package/lirc-tools/Config.in > create mode 100755 package/lirc-tools/S25lircd > create mode 100644 package/lirc-tools/lirc-tools.hash > create mode 100644 package/lirc-tools/lirc-tools.mk [...] > diff --git a/package/lirc-tools/lirc-tools.mk > b/package/lirc-tools/lirc-tools.mk > new file mode 100644 > index 0000000..791ed8d > --- /dev/null > +++ b/package/lirc-tools/lirc-tools.mk > @@ -0,0 +1,20 @@ > +################################################################################ > +# > +# lirc-tools > +# > +################################################################################ > + > +LIRC_TOOLS_VERSION = 0.9.2 > +LIRC_TOOLS_SOURCE = lirc-$(LIRC_TOOLS_VERSION).tar.bz2 > +LIRC_TOOLS_SITE = http://downloads.sourceforge.net/project/lirc/LIRC/$(LIRC_TOOLS_VERSION)/ I forgot to mention that earlier, but please add license information here. See the description of _LICENSE and _LICENSE_FILES in the manual at http://nightly.buildroot.org/manual.html#_infrastructure_for_packages_with_specific_build_systems. > + > +LIRC_TOOLS_CONF_OPTS = --without-x --enable-sandboxed --with-driver=userspace > + > +define LIRC_TOOLS_INSTALL_INIT_SYSV > + $(INSTALL) -D -m 0755 package/lirc-tools/S25lircd $(TARGET_DIR)/etc/init.d/ > +endef > + > +$(eval $(autotools-package)) > +# > +# lcdproc > +# Please remove this part. baruch
diff --git a/package/Config.in b/package/Config.in index 93fde92..f97ea6e 100644 --- a/package/Config.in +++ b/package/Config.in @@ -342,6 +342,7 @@ endif source "package/iucode-tool/Config.in" source "package/kbd/Config.in" source "package/lcdproc/Config.in" + source "package/lirc-tools/Config.in" source "package/lm-sensors/Config.in" source "package/lshw/Config.in" source "package/lsuio/Config.in" diff --git a/package/lirc-tools/Config.in b/package/lirc-tools/Config.in new file mode 100644 index 0000000..6c02418 --- /dev/null +++ b/package/lirc-tools/Config.in @@ -0,0 +1,15 @@ +config BR2_PACKAGE_LIRC_TOOLS + bool "lirc-tools" + help + Linux Infrared Remote Control IR receiver/transmitter Daemon and tools + LIRC is a package that supports receiving and sending IR + signals of the most common IR remote controls. It contains a + daemon that decodes and sends IR signals, a mouse daemon + that translates IR signals to mouse movements and a couple + of user programs that allow to control your computer with a + remote control. + + lircd, irw, irrecord, mode2 etc + + http://www.lirc.org/ + diff --git a/package/lirc-tools/S25lircd b/package/lirc-tools/S25lircd new file mode 100755 index 0000000..e4d98f5 --- /dev/null +++ b/package/lirc-tools/S25lircd @@ -0,0 +1,38 @@ +#!/bin/sh +# +# Start lirc +# +# Support for remotes - Add remotes to /etc/lirc/lircd.conf.d/ +# + +start() { + echo -n "Starting lirc: " + mkdir /var/run/lirc + ln -s /var/run/lirc/lircd /dev/lircd + start-stop-daemon -b -S -q -m -p /var/run/lirc.pid --exec /usr/sbin/lircd -- -O /etc/lirc/lirc_options.conf + echo "OK" +} + +stop() { + echo -n "Stopping lirc: " + start-stop-daemon -K -q -p /var/run/lirc.pid + echo "OK" +} + +case "$1" in + start) + start + ;; + stop) + stop + ;; + restart|reload) + stop + start + ;; + *) + echo "Usage: $0 {start|stop|restart}" + exit 1 +esac + +exit $? diff --git a/package/lirc-tools/lirc-tools.hash b/package/lirc-tools/lirc-tools.hash new file mode 100644 index 0000000..3986767 --- /dev/null +++ b/package/lirc-tools/lirc-tools.hash @@ -0,0 +1,2 @@ +#hash from http://sourceforge.net/projects/lirc/files/LIRC/0.9.2/ +sha1 585daed1eaa169b9683a507e26b1331a947a4dcd lirc-0.9.2.tar.bz2 diff --git a/package/lirc-tools/lirc-tools.mk b/package/lirc-tools/lirc-tools.mk new file mode 100644 index 0000000..791ed8d --- /dev/null +++ b/package/lirc-tools/lirc-tools.mk @@ -0,0 +1,20 @@ +################################################################################ +# +# lirc-tools +# +################################################################################ + +LIRC_TOOLS_VERSION = 0.9.2 +LIRC_TOOLS_SOURCE = lirc-$(LIRC_TOOLS_VERSION).tar.bz2 +LIRC_TOOLS_SITE = http://downloads.sourceforge.net/project/lirc/LIRC/$(LIRC_TOOLS_VERSION)/ + +LIRC_TOOLS_CONF_OPTS = --without-x --enable-sandboxed --with-driver=userspace + +define LIRC_TOOLS_INSTALL_INIT_SYSV + $(INSTALL) -D -m 0755 package/lirc-tools/S25lircd $(TARGET_DIR)/etc/init.d/ +endef + +$(eval $(autotools-package)) +# +# lcdproc +#
This package adds the userspace tools LIRC - Linux remote control. The Kernel package will need to be selected. Thanks to Baruch for help so far. Signed-off-by: Rhys Williams <github@wilberforce.co.nz> --- package/Config.in | 1 + package/lirc-tools/Config.in | 15 +++++++++++++++ package/lirc-tools/S25lircd | 38 ++++++++++++++++++++++++++++++++++++++ package/lirc-tools/lirc-tools.hash | 2 ++ package/lirc-tools/lirc-tools.mk | 20 ++++++++++++++++++++ 5 files changed, 76 insertions(+) create mode 100644 package/lirc-tools/Config.in create mode 100755 package/lirc-tools/S25lircd create mode 100644 package/lirc-tools/lirc-tools.hash create mode 100644 package/lirc-tools/lirc-tools.mk