diff mbox

[net-next,v2,7/7] net: bcmgenet: power down and up GPHY during suspend/resume

Message ID 1427148597-28337-8-git-send-email-f.fainelli@gmail.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Florian Fainelli March 23, 2015, 10:09 p.m. UTC 
In case the interface is not used, power down the integrated GPHY during
suspend. Similarly to bcmgenet_open(), bcmgenet_resume() powers on the GPHY
prior to any UniMAC activity.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox

Patch

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index c6b15c3cf023..c38d5429e27a 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3107,6 +3107,8 @@  static int bcmgenet_suspend(struct device *d)
 	if (device_may_wakeup(d) && priv->wolopts) {
 		ret = bcmgenet_power_down(priv, GENET_POWER_WOL_MAGIC);
 		clk_prepare_enable(priv->clk_wol);
+	} else if (phy_is_internal(priv->phydev)) {
+		ret = bcmgenet_power_down(priv, GENET_POWER_PASSIVE);
 	}
 
 	/* Turn off the clocks */
@@ -3131,6 +3133,12 @@  static int bcmgenet_resume(struct device *d)
 	if (ret)
 		return ret;
 
+	/* If this is an internal GPHY, power it back on now, before UniMAC is
+	 * brought out of reset as absolutely no UniMAC activity is allowed
+	 */
+	if (phy_is_internal(priv->phydev))
+		bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
+
 	bcmgenet_umac_reset(priv);
 
 	ret = init_umac(priv);