@@ -222,28 +222,6 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
val |= 0x000c;
REG_WRITE(addr, 0x04, val);
- /* Port Control 1: disable trunking. Also, if this is the
- * CPU port, enable learn messages to be sent to this port.
- */
- REG_WRITE(addr, 0x05, dsa_is_cpu_port(ds, p) ? 0x8000 : 0x0000);
-
- /* Port based VLAN map: give each port its own address
- * database, allow the CPU port to talk to each of the 'real'
- * ports, and allow each of the 'real' ports to only talk to
- * the upstream port.
- */
- val = (p & 0xf) << 12;
- if (dsa_is_cpu_port(ds, p))
- val |= ds->phys_port_mask;
- else
- val |= 1 << dsa_upstream_port(ds);
- REG_WRITE(addr, 0x06, val);
-
- /* Default VLAN ID and priority: don't set a default VLAN
- * ID, and set the default packet priority to zero.
- */
- REG_WRITE(addr, 0x07, 0x0000);
-
/* Port Control 2: don't force a good FCS, set the maximum
* frame size to 10240 bytes, don't let the switch add or
* strip 802.1q tags, don't discard tagged or untagged frames
@@ -288,7 +266,7 @@ static int mv88e6123_61_65_setup_port(struct dsa_switch *ds, int p)
*/
REG_WRITE(addr, 0x19, 0x7654);
- return 0;
+ return mv88e6xxx_setup_port_common(ds, p);
}
static int mv88e6123_61_65_setup(struct dsa_switch *ds)
This will simplify adding offloaded bridge support later on. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- drivers/net/dsa/mv88e6123_61_65.c | 24 +----------------------- 1 file changed, 1 insertion(+), 23 deletions(-)