@@ -652,6 +652,7 @@ config TARGET_LS2085AQDS
bool "Support ls2085aqds"
select ARM64
select ARMV8_MULTIENTRY
+ select SUPPORT_SPL
help
Support for Freescale LS2085AQDS platform
The LS2085A Development System (QDS) is a high-performance
@@ -6,8 +6,13 @@
#include <common.h>
#include <fsl_ifc.h>
+#include <nand.h>
+#include <spl.h>
#include <asm/arch-fsl-lsch3/soc.h>
#include <asm/io.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
static void erratum_a008751(void)
{
@@ -18,8 +23,51 @@ static void erratum_a008751(void)
#endif
}
+static void erratum_rcw_src(void)
+{
+#if defined(CONFIG_SPL)
+ u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+ u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE;
+ u32 val;
+
+ val = in_le32(dcfg_ccsr + DCFG_PORSR1 / 4);
+ val &= ~DCFG_PORSR1_RCW_SRC;
+ val |= DCFG_PORSR1_RCW_SRC_NOR;
+ out_le32(dcfg_dcsr + DCFG_DCSR_PORCR1 / 4, val);
+#endif
+}
+
void fsl_lsch3_early_init_f(void)
{
erratum_a008751();
+ erratum_rcw_src();
init_early_memctl_regs(); /* tighten IFC timing */
}
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+ /* Clear global data */
+ memset((void *)gd, 0, sizeof(gd_t));
+
+ arch_cpu_init();
+ board_early_init_f();
+ timer_init();
+ env_init();
+ gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
+
+ serial_init();
+ console_init_f();
+ dram_init();
+
+ /* Clear the BSS. */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ board_init_r(NULL, 0);
+}
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_NAND;
+}
+#endif
new file mode 100644
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <fenghua@phytium.com.cn>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,
+ LENGTH = CONFIG_SPL_MAX_SIZE }
+MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR,
+ LENGTH = CONFIG_SPL_BSS_MAX_SIZE }
+
+OUTPUT_FORMAT("elf64-littleaarch64", "elf64-littleaarch64", "elf64-littleaarch64")
+OUTPUT_ARCH(aarch64)
+ENTRY(_start)
+SECTIONS
+{
+ .text : {
+ . = ALIGN(8);
+ *(.__image_copy_start)
+ CPUDIR/start.o (.text*)
+ *(.text*)
+ } >.sram
+
+ .rodata : {
+ . = ALIGN(8);
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ } >.sram
+
+ .data : {
+ . = ALIGN(8);
+ *(.data*)
+ } >.sram
+
+ .u_boot_list : {
+ . = ALIGN(8);
+ KEEP(*(SORT(.u_boot_list*)));
+ } >.sram
+
+ .image_copy_end : {
+ . = ALIGN(8);
+ *(.__image_copy_end)
+ } >.sram
+
+ .end : {
+ . = ALIGN(8);
+ *(.__end)
+ } >.sram
+
+ .bss_start : {
+ . = ALIGN(8);
+ KEEP(*(.__bss_start));
+ } >.sdram
+
+ .bss : {
+ *(.bss*)
+ . = ALIGN(8);
+ } >.sdram
+
+ .bss_end : {
+ KEEP(*(.__bss_end));
+ } >.sdram
+
+ /DISCARD/ : { *(.dynsym) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
@@ -130,6 +130,15 @@
#define CCI_MN_DVM_DOMAIN_CTL 0x200
#define CCI_MN_DVM_DOMAIN_CTL_SET 0x210
+/* Device Configuration */
+#define DCFG_BASE 0x01e00000
+#define DCFG_PORSR1 0x000
+#define DCFG_PORSR1_RCW_SRC 0xff800000
+#define DCFG_PORSR1_RCW_SRC_NOR 0x12f00000
+
+#define DCFG_DCSR_BASE 0X700100000ULL
+#define DCFG_DCSR_PORCR1 0x000
+
/* Supplemental Configuration */
#define SCFG_BASE 0x01fc0000
#define SCFG_USB3PRM1CR 0x000
@@ -61,13 +61,18 @@ ENTRY(_main)
/*
* Set up initial C runtime environment and call board_init_f(0).
*/
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
+ ldr x0, =(CONFIG_SPL_STACK)
+#else
ldr x0, =(CONFIG_SYS_INIT_SP_ADDR)
+#endif
sub x0, x0, #GD_SIZE /* allocate one GD above SP */
bic sp, x0, #0xf /* 16-byte alignment for ABI compliance */
mov x18, sp /* GD is above SP */
mov x0, #0
bl board_init_f
+#if !defined(CONFIG_SPL_BUILD)
/*
* Set up intermediate environment (new sp and gd) and call
* relocate_code(addr_moni). Trick here is that we'll return
@@ -110,4 +115,6 @@ clear_loop:
/* NOTREACHED - board_init_r() does not return */
+#endif /* !CONFIG_SPL_BUILD */
+
ENDPROC(_main)
@@ -5,3 +5,4 @@ F: board/freescale/ls2085aqds/
F: board/freescale/ls2085a/ls2085aqds.c
F: include/configs/ls2085aqds.h
F: configs/ls2085aqds_defconfig
+F: configs/ls2085aqds_nand_defconfig
@@ -127,3 +127,22 @@ b) NOR boot
c) NAND boot
d) SD boot
e) QSPI boot
+
+Generage NAND image
+-------------------
+To form the NAND image, build u-boot with LS2085AQDS_NAND_defconfig.
+Append u-boot-with-spl.bin after RCW image. The RCW image should
+have these PBI commands
+
+1) CCSR 4-byte write to 0x00e00404, data=0x00000000
+2) CCSR 4-byte write to 0x00e00400, data=0x1800a000
+3) Block Copy: SRC=0x0104, SRC_ADDR=0x000000c0, DEST_ADDR=0x1800a000,
+BLOCK_SIZE=0x00014000
+
+These PBI commands set the bootloc registers to OCRAM address 0x1800a000
+and the SPL image is copied from the combined image into OCRAM.
+
+The SRC_ADDR should match the size of RCW image, i.e. it is the offset
+of u-boot-with-spl.bin in the NAND image. If putting RCW in a separated
+block is desired, the offset needs adjustment. Padding between the end
+of RCW and the start of u-boot image may be required.
@@ -147,9 +147,13 @@ phys_size_t initdram(int board_type)
{
phys_size_t dram_size;
+#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
+ return fsl_ddr_sdram_size();
+#else
puts("Initializing DDR....using SPD\n");
dram_size = fsl_ddr_sdram();
+#endif
return dram_size;
}
@@ -113,7 +113,7 @@ __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
typedef void __noreturn (*image_entry_noargs_t)(void);
image_entry_noargs_t image_entry =
- (image_entry_noargs_t) spl_image->entry_point;
+ (image_entry_noargs_t)(unsigned long)spl_image->entry_point;
debug("image entry point: 0x%X\n", spl_image->entry_point);
image_entry();
@@ -91,7 +91,7 @@ void spl_nand_load_image(void)
sizeof(*header), (void *)header);
spl_parse_image_header(header);
nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
- spl_image.size, (void *)spl_image.load_addr);
+ spl_image.size, (void *)(unsigned long)spl_image.load_addr);
nand_deselect();
}
#endif
new file mode 100644
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,NAND"
+CONFIG_SPL=y
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_LS2085AQDS=y
@@ -168,13 +168,25 @@ void init_final_memctl_regs(void)
#ifdef CONFIG_SYS_CSPR0_FINAL
set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0_FINAL);
#endif
+#ifdef CONFIG_SYS_AMASK0_FINAL
+ set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
+#endif
#ifdef CONFIG_SYS_CSPR1_FINAL
set_ifc_cspr(IFC_CS1, CONFIG_SYS_CSPR1_FINAL);
#endif
#ifdef CONFIG_SYS_AMASK1_FINAL
set_ifc_amask(IFC_CS1, CONFIG_SYS_AMASK1_FINAL);
#endif
+#ifdef CONFIG_SYS_CSPR2_FINAL
+ set_ifc_cspr(IFC_CS2, CONFIG_SYS_CSPR2_FINAL);
+#endif
+#ifdef CONFIG_SYS_AMASK2_FINAL
+ set_ifc_amask(IFC_CS2, CONFIG_SYS_AMASK2);
+#endif
#ifdef CONFIG_SYS_CSPR3_FINAL
set_ifc_cspr(IFC_CS3, CONFIG_SYS_CSPR3_FINAL);
#endif
+#ifdef CONFIG_SYS_AMASK3_FINAL
+ set_ifc_amask(IFC_CS3, CONFIG_SYS_AMASK3);
+#endif
}
@@ -66,7 +66,7 @@ static inline void nand_wait(uchar *buf, int bufnum, int page_size)
{
struct fsl_ifc_runtime *ifc = runtime_regs_address();
u32 status;
- u32 eccstat[4];
+ u32 eccstat[8];
int bufperpage = page_size / 512;
int bufnum_end, i;
@@ -28,7 +28,11 @@
#define CONFIG_ARCH_MISC_INIT
/* Link Definitions */
+#ifdef CONFIG_SPL
+#define CONFIG_SYS_TEXT_BASE 0x80400000
+#else
#define CONFIG_SYS_TEXT_BASE 0x30100000
+#endif
#ifdef CONFIG_EMU
#define CONFIG_SYS_NO_FLASH
@@ -47,7 +51,9 @@
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+#ifndef CONFIG_SPL
#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
+#endif
#ifndef CONFIG_SYS_FSL_DDR4
#define CONFIG_SYS_FSL_DDR3 /* Use DDR3 memory */
#define CONFIG_SYS_DDR_RAW_TIMING
@@ -272,4 +278,27 @@ unsigned long get_dram_size_to_hide(void);
#define CONFIG_PANIC_HANG /* do not reset board on panic */
+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_MAX_SIZE 0x16000
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_TEXT_BASE 0x1800a000
+
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x80400000
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+
#endif /* __LS2_COMMON_H */
@@ -147,10 +147,12 @@ unsigned long get_board_ddr_clk(void);
#define QIXIS_LBMAP_SHIFT 0
#define QIXIS_LBMAP_DFLTBANK 0x00
#define QIXIS_LBMAP_ALTBANK 0x04
+#define QIXIS_LBMAP_NAND 0x09
#define QIXIS_RST_CTL_RESET 0x31
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_RCW_SRC_NAND 0x107
#define QIXIS_RST_FORCE_MEM 0x01
#define CONFIG_SYS_CSPR3_EXT (0x0)
@@ -176,6 +178,43 @@ unsigned long get_board_ddr_clk(void);
FTIM2_GPCM_TWP(0x3E))
#define CONFIG_SYS_CS3_FTIM3 0x0
+#if defined(CONFIG_SPL) && defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR_EARLY
+#define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR_EARLY
+#define CONFIG_SYS_CSPR2_FINAL CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK_EARLY
+#define CONFIG_SYS_AMASK2_FINAL CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET (896 * 1024)
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SPL_PAD_TO 0x1ff40
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 * 1024)
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 * 1024)
+#else
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY
#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR
@@ -204,6 +243,12 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000)
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SIZE 0x2000
+#endif
+
/* Debug Server firmware */
#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL
@@ -249,11 +294,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000)
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_ENV_SIZE 0x2000
-
#define CONFIG_FSL_MEMAC
#define CONFIG_PCI /* Enable PCIE */
#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */