@@ -25,8 +25,9 @@ DECLARE_GLOBAL_DATA_PTR;
* levels of translation tables here to cover 40-bit address space.
* We use 4KB granule size, with 40 bits physical address, T0SZ=24
* Level 0 IA[39], table address @0
- * Level 1 IA[31:30], table address @01000, 0x2000
- * Level 2 IA[29:21], table address @0x3000
+ * Level 1 IA[31:30], table address @0x1000, 0x2000
+ * Level 2 IA[29:21], table address @0x3000, 0x4000
+ * Address above 0x5000 is free for other purpose.
*/
#define SECTION_SHIFT_L0 39UL
@@ -61,12 +62,12 @@ static inline void early_mmu_setup(void)
{
int el;
u64 i;
- u64 section_l1t0, section_l1t1, section_l2;
+ u64 section_l1t0, section_l1t1, section_l2t0, section_l2t1;
u64 *level0_table = (u64 *)CONFIG_SYS_FSL_OCRAM_BASE;
u64 *level1_table_0 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x1000);
u64 *level1_table_1 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x2000);
- u64 *level2_table = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x3000);
-
+ u64 *level2_table_0 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x3000);
+ u64 *level2_table_1 = (u64 *)(CONFIG_SYS_FSL_OCRAM_BASE + 0x4000);
level0_table[0] =
(u64)level1_table_0 | PMD_TYPE_TABLE;
@@ -80,21 +81,25 @@ static inline void early_mmu_setup(void)
*/
section_l1t0 = 0;
section_l1t1 = BLOCK_SIZE_L0;
- section_l2 = 0;
+ section_l2t0 = 0;
+ section_l2t1 = CONFIG_SYS_FLASH_BASE;
for (i = 0; i < 512; i++) {
set_pgtable_section(level1_table_0, i, section_l1t0,
MT_DEVICE_NGNRNE);
set_pgtable_section(level1_table_1, i, section_l1t1,
MT_NORMAL);
- set_pgtable_section(level2_table, i, section_l2,
+ set_pgtable_section(level2_table_0, i, section_l2t0,
+ MT_DEVICE_NGNRNE);
+ set_pgtable_section(level2_table_1, i, section_l2t1,
MT_DEVICE_NGNRNE);
section_l1t0 += BLOCK_SIZE_L1;
section_l1t1 += BLOCK_SIZE_L1;
- section_l2 += BLOCK_SIZE_L2;
+ section_l2t0 += BLOCK_SIZE_L2;
+ section_l2t1 += BLOCK_SIZE_L2;
}
level1_table_0[0] =
- (u64)level2_table | PMD_TYPE_TABLE;
+ (u64)level2_table_0 | PMD_TYPE_TABLE;
level1_table_0[1] =
0x40000000 | PMD_SECT_AF | PMD_TYPE_SECT |
PMD_ATTRINDX(MT_DEVICE_NGNRNE);
@@ -105,17 +110,34 @@ static inline void early_mmu_setup(void)
0xc0000000 | PMD_SECT_AF | PMD_TYPE_SECT |
PMD_ATTRINDX(MT_NORMAL);
- /* Rewrite table to enable cache */
- set_pgtable_section(level2_table,
+ /* Rewerite table to enable cache for OCRAM */
+ set_pgtable_section(level2_table_0,
CONFIG_SYS_FSL_OCRAM_BASE >> SECTION_SHIFT_L2,
CONFIG_SYS_FSL_OCRAM_BASE,
MT_NORMAL);
- for (i = CONFIG_SYS_IFC_BASE >> SECTION_SHIFT_L2;
- i < (CONFIG_SYS_IFC_BASE + CONFIG_SYS_IFC_SIZE)
- >> SECTION_SHIFT_L2; i++) {
- section_l2 = i << SECTION_SHIFT_L2;
- set_pgtable_section(level2_table, i,
- section_l2, MT_NORMAL);
+
+#if defined(CONFIG_SYS_NOR0_CSPR_EARLY) && defined(CONFIG_SYS_NOR_AMASK_EARLY)
+ /* Rewrite table to enable cache for two entries (4MB) */
+ section_l2t1 = CONFIG_SYS_IFC_BASE;
+ set_pgtable_section(level2_table_0,
+ section_l2t1 >> SECTION_SHIFT_L2,
+ section_l2t1,
+ MT_NORMAL);
+ section_l2t1 += BLOCK_SIZE_L2;
+ set_pgtable_section(level2_table_0,
+ section_l2t1 >> SECTION_SHIFT_L2,
+ section_l2t1,
+ MT_NORMAL);
+#endif
+
+ /* Create a mapping for 256MB IFC region to final flash location */
+ level1_table_0[CONFIG_SYS_FLASH_BASE >> SECTION_SHIFT_L1] =
+ (u64)level2_table_1 | PMD_TYPE_TABLE;
+ section_l2t1 = CONFIG_SYS_IFC_BASE;
+ for (i = 0; i < 0x10000000 >> SECTION_SHIFT_L2; i++) {
+ set_pgtable_section(level2_table_1, i,
+ section_l2t1, MT_DEVICE_NGNRNE);
+ section_l2t1 += BLOCK_SIZE_L2;
}
el = current_el();
@@ -699,6 +699,12 @@ init_fnc_t init_sequence_r[] = {
/* TODO: could x86/PPC have this also perhaps? */
#ifdef CONFIG_ARM
initr_caches,
+ /* Note: For Freescale LS2 SoCs, new MMU table is created in DDR.
+ * A temporary mapping of IFC high region is since removed,
+ * so environmental variables in NOR flash is not availble
+ * until board_init() is called below to remap IFC to high
+ * region.
+ */
#endif
initr_reloc_global_data,
#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
During booting, IFC is mapped to low region. After booting up, IFC is remapped to high region for larger space. The environmental variables are also stored at high region. In order to read the variables during booting, a virtual mapping is required. Cache was enabled for entire IFC space before. Actually the first two entries are big enough (4MB) to cover the boot code and environmental variables. Remove extra entries. Move OCRAM entry out of ifdef. Signed-off-by: York Sun <yorksun@freescale.com> --- arch/arm/cpu/armv8/fsl-lsch3/cpu.c | 56 +++++++++++++++++++++++++----------- common/board_r.c | 6 ++++ 2 files changed, 45 insertions(+), 17 deletions(-)