Message ID | 1426581951-11869-3-git-send-email-ingi2.kim@samsung.com |
---|---|
State | Superseded, archived |
Headers | show |
On 03/17/2015 05:45 PM, Ingi Kim wrote: > This patch adds the device tree bindings for ktd2692 flash LEDs. > Add optional properties 'flash-timeout-us' to control flash timeout > and 'vin-supply' for flash-led regulator > > Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> > --- > .../devicetree/bindings/leds/leds-ktd2692.txt | 37 ++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt > > diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt > new file mode 100644 > index 0000000..1b44225 > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt > @@ -0,0 +1,37 @@ > +* Kinetic Technologies - KTD2692 Flash LED Driver > + > +KTD2692 is the ideal power solution for high-power flash LEDs. > +It uses ExpressWire single-wire programming for maximum flexibility. > + > +The ExpressWire interface through CTRL pin can control LED on/off and > +enable/disable the IC, Movie/Flash mode current, Flash timeout, > +LVP(low voltage protection). > + > +Required properties: > + - compatible: "kinetic,ktd2692" > + - ctrl-gpio : gpio pin in order control ktd2692 flash led. > + There is an internal 300kOhm pull-down resistor at this pin > + - supply : "vin" LED supply > + > +Optional property: > + - flash-timeout-us : Maximum flash timeout in microseconds. > + flash timeout ranges from 0 to 1835000us and > + default is 1049000us. > + > +Example: > + > +vbat: fixedregulator@0 { > + compatible = "regulator-fixed"; > + regulator-name = "vbat-supply"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <>; gpio = <> ? What do you mean? And this is described at Documentation/devicetree/bindings/regulator/fixed-regulator.txt I'm not sure whether this example really needs. Best Regards, Jaehoon Chung > + regulator-always-on; > +}; > + > +flash-led { > + compatible = "kinetic,ktd2692"; > + ctrl-gpio = <&gpc0 1 0>; > + flash-timeout-us = <1835000>; > + vin-supply = <&vbat>; > +}; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi On 2015년 03월 18일 07:40, Jaehoon Chung wrote: > On 03/17/2015 05:45 PM, Ingi Kim wrote: >> This patch adds the device tree bindings for ktd2692 flash LEDs. >> Add optional properties 'flash-timeout-us' to control flash timeout >> and 'vin-supply' for flash-led regulator >> >> Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> >> --- >> .../devicetree/bindings/leds/leds-ktd2692.txt | 37 ++++++++++++++++++++++ >> 1 file changed, 37 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt >> >> diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt >> new file mode 100644 >> index 0000000..1b44225 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt >> @@ -0,0 +1,37 @@ >> +* Kinetic Technologies - KTD2692 Flash LED Driver >> + >> +KTD2692 is the ideal power solution for high-power flash LEDs. >> +It uses ExpressWire single-wire programming for maximum flexibility. >> + >> +The ExpressWire interface through CTRL pin can control LED on/off and >> +enable/disable the IC, Movie/Flash mode current, Flash timeout, >> +LVP(low voltage protection). >> + >> +Required properties: >> + - compatible: "kinetic,ktd2692" >> + - ctrl-gpio : gpio pin in order control ktd2692 flash led. >> + There is an internal 300kOhm pull-down resistor at this pin >> + - supply : "vin" LED supply >> + >> +Optional property: >> + - flash-timeout-us : Maximum flash timeout in microseconds. >> + flash timeout ranges from 0 to 1835000us and >> + default is 1049000us. >> + >> +Example: >> + >> +vbat: fixedregulator@0 { >> + compatible = "regulator-fixed"; >> + regulator-name = "vbat-supply"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + gpio = <>; > > gpio = <> ? What do you mean? > And this is described at Documentation/devicetree/bindings/regulator/fixed-regulator.txt > I'm not sure whether this example really needs. > > Best Regards, > Jaehoon Chung > I just want to show that dummy regulator can be used with flash-led. As you mentioned earlier, remove unnecessary example and add refer comment Thanks, Ingi Kim >> + regulator-always-on; >> +}; >> + >> +flash-led { >> + compatible = "kinetic,ktd2692"; >> + ctrl-gpio = <&gpc0 1 0>; >> + flash-timeout-us = <1835000>; >> + vin-supply = <&vbat>; >> +}; >> > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt new file mode 100644 index 0000000..1b44225 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt @@ -0,0 +1,37 @@ +* Kinetic Technologies - KTD2692 Flash LED Driver + +KTD2692 is the ideal power solution for high-power flash LEDs. +It uses ExpressWire single-wire programming for maximum flexibility. + +The ExpressWire interface through CTRL pin can control LED on/off and +enable/disable the IC, Movie/Flash mode current, Flash timeout, +LVP(low voltage protection). + +Required properties: + - compatible: "kinetic,ktd2692" + - ctrl-gpio : gpio pin in order control ktd2692 flash led. + There is an internal 300kOhm pull-down resistor at this pin + - supply : "vin" LED supply + +Optional property: + - flash-timeout-us : Maximum flash timeout in microseconds. + flash timeout ranges from 0 to 1835000us and + default is 1049000us. + +Example: + +vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <>; + regulator-always-on; +}; + +flash-led { + compatible = "kinetic,ktd2692"; + ctrl-gpio = <&gpc0 1 0>; + flash-timeout-us = <1835000>; + vin-supply = <&vbat>; +};
This patch adds the device tree bindings for ktd2692 flash LEDs. Add optional properties 'flash-timeout-us' to control flash timeout and 'vin-supply' for flash-led regulator Signed-off-by: Ingi Kim <ingi2.kim@samsung.com> --- .../devicetree/bindings/leds/leds-ktd2692.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt