[v2,4/5] PCI: designware: Add disable IO support
diff mbox

Message ID 1426515635-9466-5-git-send-email-gabriel.fernandez@linaro.org
State New, archived
Headers show

Commit Message

Gabriel Fernandez March 16, 2015, 2:20 p.m. UTC
ST sti SoCs PCIe IPs are built around DesignWare IP Core.
But in these SoCs PCIe IP doesn't support IO.

This patch adds the possibility to disable it through
a DT property, by creating an empty IO window and by
removing PCI_COMMAND_IO from the setup register.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
---
 .../devicetree/bindings/pci/designware-pcie.txt    |  2 ++
 drivers/pci/host/pcie-designware.c                 | 24 ++++++++++++++++++++--
 drivers/pci/host/pcie-designware.h                 |  1 +
 3 files changed, 25 insertions(+), 2 deletions(-)

Comments

Srinivas Kandagatla March 16, 2015, 5:53 p.m. UTC | #1
On 16/03/15 14:20, Gabriel FERNANDEZ wrote:
>   - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to
>     specify this property, to keep backwards compatibility a range of 0x00-0xff
>     is assumed if not present)
> +- disable_io_support: set this property for PCIe host controller without IO
> +  port access
Shouldn't dt properties use hyphens rather than under scores ?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Kumar Gala March 16, 2015, 6 p.m. UTC | #2
On Mar 16, 2015, at 9:20 AM, Gabriel FERNANDEZ <gabriel.fernandez@st.com> wrote:

> ST sti SoCs PCIe IPs are built around DesignWare IP Core.
> But in these SoCs PCIe IP doesn't support IO.
> 
> This patch adds the possibility to disable it through
> a DT property, by creating an empty IO window and by
> removing PCI_COMMAND_IO from the setup register.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> ---
> .../devicetree/bindings/pci/designware-pcie.txt    |  2 ++
> drivers/pci/host/pcie-designware.c                 | 24 ++++++++++++++++++++--
> drivers/pci/host/pcie-designware.h                 |  1 +
> 3 files changed, 25 insertions(+), 2 deletions(-)

Why not just update the code such that if the ranges doesn’t have an IO space rather than introducing a new DT property?

- k

> 
> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> index 9f4faa8..40544d4 100644
> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> @@ -26,3 +26,5 @@ Optional properties:
> - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to
>   specify this property, to keep backwards compatibility a range of 0x00-0xff
>   is assumed if not present)
> +- disable_io_support: set this property for PCIe host controller without IO
> +  port access
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 1f4ea6f..f9d70f5 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -471,6 +471,9 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
> 		return -EINVAL;
> 	}
> 
> +	pp->disable_io_support = of_property_read_bool(np,
> +			"disable_io_support");
> +
> 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> 		if (!pp->ops->msi_host_init) {
> 			pp->irq_domain = irq_domain_add_linear(pp->dev->of_node,
> @@ -704,6 +707,7 @@ static struct pci_ops dw_pcie_ops = {
> static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
> {
> 	struct pcie_port *pp;
> +	struct resource *res;
> 
> 	pp = sys_to_pcie(sys);
> 
> @@ -719,6 +723,18 @@ static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
> 	pci_add_resource_offset(&sys->resources, &pp->mem, sys->mem_offset);
> 	pci_add_resource(&sys->resources, &pp->busn);
> 
> +	if (pp->disable_io_support) {
> +		/* This PCIe controller does not support IO, set an empty one */
> +		res = devm_kzalloc(pp->dev, sizeof(*res), GFP_KERNEL);
> +		if (res) {
> +			res->start = 0;
> +			res->end = 0;
> +			res->name = "PCIe empty IO space";
> +			res->flags = IORESOURCE_IO;
> +			pci_add_resource(&sys->resources, res);

Do we really need an empty resource?  What happens if we just dont have one?

> +		}
> +	}
> +
> 	return 1;
> }
> 
> @@ -822,8 +838,12 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
> 	/* setup command register */
> 	dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
> 	val &= 0xffff0000;
> -	val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
> -		PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
> +
> +	if (!pp->disable_io_support)
> +		val |= PCI_COMMAND_IO;
> +
> +	val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
> +
> 	dw_pcie_writel_rc(pp, val, PCI_COMMAND);
> }
> 
> diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
> index d0bbd27..027045d 100644
> --- a/drivers/pci/host/pcie-designware.h
> +++ b/drivers/pci/host/pcie-designware.h
> @@ -52,6 +52,7 @@ struct pcie_port {
> 	int			msi_irq;
> 	struct irq_domain	*irq_domain;
> 	unsigned long		msi_data;
> +	bool			disable_io_support;
> 	DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
> };
> 
> -- 
> 1.9.1
>
Arnd Bergmann March 16, 2015, 8 p.m. UTC | #3
On Monday 16 March 2015 13:00:51 Kumar Gala wrote:
> On Mar 16, 2015, at 9:20 AM, Gabriel FERNANDEZ <gabriel.fernandez@st.com> wrote:
> 
> > ST sti SoCs PCIe IPs are built around DesignWare IP Core.
> > But in these SoCs PCIe IP doesn't support IO.
> > 
> > This patch adds the possibility to disable it through
> > a DT property, by creating an empty IO window and by
> > removing PCI_COMMAND_IO from the setup register.
> > 
> > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
> > Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
> > ---
> > .../devicetree/bindings/pci/designware-pcie.txt    |  2 ++
> > drivers/pci/host/pcie-designware.c                 | 24 ++++++++++++++++++++--
> > drivers/pci/host/pcie-designware.h                 |  1 +
> > 3 files changed, 25 insertions(+), 2 deletions(-)
> 
> Why not just update the code such that if the ranges doesn’t have an IO
> space rather than introducing a new DT property?

I suspect we can simplify this now by changing over the designware PCI
code from pci_common_init_dev to calling pci_scan_root_bus() in the
same way that pci-versatile.c does. This would also clean up some
other areas of the driver and let you do proper error handling
in the probe.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Gabriel Fernandez March 17, 2015, 7:41 a.m. UTC | #4
Hi Arnd,

Ok i will try the same way that pci-versatile.c

Thanks.

Gabriel

On 16 March 2015 at 21:00, Arnd Bergmann <arnd@arndb.de> wrote:
> On Monday 16 March 2015 13:00:51 Kumar Gala wrote:
>> On Mar 16, 2015, at 9:20 AM, Gabriel FERNANDEZ <gabriel.fernandez@st.com> wrote:
>>
>> > ST sti SoCs PCIe IPs are built around DesignWare IP Core.
>> > But in these SoCs PCIe IP doesn't support IO.
>> >
>> > This patch adds the possibility to disable it through
>> > a DT property, by creating an empty IO window and by
>> > removing PCI_COMMAND_IO from the setup register.
>> >
>> > Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
>> > Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
>> > ---
>> > .../devicetree/bindings/pci/designware-pcie.txt    |  2 ++
>> > drivers/pci/host/pcie-designware.c                 | 24 ++++++++++++++++++++--
>> > drivers/pci/host/pcie-designware.h                 |  1 +
>> > 3 files changed, 25 insertions(+), 2 deletions(-)
>>
>> Why not just update the code such that if the ranges doesn’t have an IO
>> space rather than introducing a new DT property?
>
> I suspect we can simplify this now by changing over the designware PCI
> code from pci_common_init_dev to calling pci_scan_root_bus() in the
> same way that pci-versatile.c does. This would also clean up some
> other areas of the driver and let you do proper error handling
> in the probe.
>
>         Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Gabriel Fernandez March 17, 2015, 7:49 a.m. UTC | #5
Hi Srinivas,

Yes, you are right.

Nevertheless i'll try the Kumar and Arnd 's request to not use DT to do that.

BR

Gabriel

On 16 March 2015 at 18:53, Srinivas Kandagatla
<srinivas.kandagatla@linaro.org> wrote:
>
>
> On 16/03/15 14:20, Gabriel FERNANDEZ wrote:
>>
>>   - bus-range: PCI bus numbers covered (it is recommended for new
>> devicetrees to
>>     specify this property, to keep backwards compatibility a range of
>> 0x00-0xff
>>     is assumed if not present)
>> +- disable_io_support: set this property for PCIe host controller without
>> IO
>> +  port access
>
> Shouldn't dt properties use hyphens rather than under scores ?
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index 9f4faa8..40544d4 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -26,3 +26,5 @@  Optional properties:
 - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to
   specify this property, to keep backwards compatibility a range of 0x00-0xff
   is assumed if not present)
+- disable_io_support: set this property for PCIe host controller without IO
+  port access
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 1f4ea6f..f9d70f5 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -471,6 +471,9 @@  int __init dw_pcie_host_init(struct pcie_port *pp)
 		return -EINVAL;
 	}
 
+	pp->disable_io_support = of_property_read_bool(np,
+			"disable_io_support");
+
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		if (!pp->ops->msi_host_init) {
 			pp->irq_domain = irq_domain_add_linear(pp->dev->of_node,
@@ -704,6 +707,7 @@  static struct pci_ops dw_pcie_ops = {
 static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
 {
 	struct pcie_port *pp;
+	struct resource *res;
 
 	pp = sys_to_pcie(sys);
 
@@ -719,6 +723,18 @@  static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
 	pci_add_resource_offset(&sys->resources, &pp->mem, sys->mem_offset);
 	pci_add_resource(&sys->resources, &pp->busn);
 
+	if (pp->disable_io_support) {
+		/* This PCIe controller does not support IO, set an empty one */
+		res = devm_kzalloc(pp->dev, sizeof(*res), GFP_KERNEL);
+		if (res) {
+			res->start = 0;
+			res->end = 0;
+			res->name = "PCIe empty IO space";
+			res->flags = IORESOURCE_IO;
+			pci_add_resource(&sys->resources, res);
+		}
+	}
+
 	return 1;
 }
 
@@ -822,8 +838,12 @@  void dw_pcie_setup_rc(struct pcie_port *pp)
 	/* setup command register */
 	dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
 	val &= 0xffff0000;
-	val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-		PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
+
+	if (!pp->disable_io_support)
+		val |= PCI_COMMAND_IO;
+
+	val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
+
 	dw_pcie_writel_rc(pp, val, PCI_COMMAND);
 }
 
diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
index d0bbd27..027045d 100644
--- a/drivers/pci/host/pcie-designware.h
+++ b/drivers/pci/host/pcie-designware.h
@@ -52,6 +52,7 @@  struct pcie_port {
 	int			msi_irq;
 	struct irq_domain	*irq_domain;
 	unsigned long		msi_data;
+	bool			disable_io_support;
 	DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
 };