diff mbox

[v3,1/2] ARM: imx25: Remove eukrea mx25 board files

Message ID 1426038004-18040-1-git-send-email-festevam@gmail.com
State New
Headers show

Commit Message

Fabio Estevam March 11, 2015, 1:40 a.m. UTC
From: Fabio Estevam <fabio.estevam@freescale.com>

eukrea mx25 is well supported in device tree, so let's get rid of its board
files.

Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v2:
- Rebased

 arch/arm/mach-imx/Kconfig                      |  34 ---
 arch/arm/mach-imx/Makefile                     |   2 -
 arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c | 310 -------------------------
 arch/arm/mach-imx/mach-eukrea_cpuimx25.c       | 172 --------------
 4 files changed, 518 deletions(-)
 delete mode 100644 arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
 delete mode 100644 arch/arm/mach-imx/mach-eukrea_cpuimx25.c

Comments

Shawn Guo March 11, 2015, 7:33 a.m. UTC | #1
On Tue, Mar 10, 2015 at 10:40:02PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> eukrea mx25 is well supported in device tree, so let's get rid of its board
> files.
> 
> Cc: Eric Bénard <eric@eukrea.com>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

Applied all 3 (the subject should really be 1/3).
diff mbox

Patch

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 247a465..6eec625 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -149,40 +149,6 @@  config MACH_MX21ADS
 	  Include support for MX21ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
-comment "MX25 platforms:"
-
-config MACH_EUKREA_CPUIMX25SD
-	bool "Support Eukrea CPUIMX25 Platform"
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select USB_ULPI_VIEWPORT if USB_ULPI
-	select SOC_IMX25
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX25SD
-	default MACH_EUKREA_MBIMXSD25_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD25_BASEBOARD
-	bool "Eukrea MBIMXSD development board"
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
 config MACH_IMX25_DT
 	bool "Support i.MX25 platforms from device tree"
 	select SOC_IMX25
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index e92ede9..724b7fb 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -49,8 +49,6 @@  obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
 # i.MX25 based machines
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
 obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
 
 # i.MX27 based machines
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
deleted file mode 100644
index 10e5381..0000000
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ /dev/null
@@ -1,310 +0,0 @@ 
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/spi/spi.h>
-#include <video/platform_lcd.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
-	/* LCD */
-	MX25_PAD_LD0__LD0,
-	MX25_PAD_LD1__LD1,
-	MX25_PAD_LD2__LD2,
-	MX25_PAD_LD3__LD3,
-	MX25_PAD_LD4__LD4,
-	MX25_PAD_LD5__LD5,
-	MX25_PAD_LD6__LD6,
-	MX25_PAD_LD7__LD7,
-	MX25_PAD_LD8__LD8,
-	MX25_PAD_LD9__LD9,
-	MX25_PAD_LD10__LD10,
-	MX25_PAD_LD11__LD11,
-	MX25_PAD_LD12__LD12,
-	MX25_PAD_LD13__LD13,
-	MX25_PAD_LD14__LD14,
-	MX25_PAD_LD15__LD15,
-	MX25_PAD_GPIO_E__LD16,
-	MX25_PAD_GPIO_F__LD17,
-	MX25_PAD_HSYNC__HSYNC,
-	MX25_PAD_VSYNC__VSYNC,
-	MX25_PAD_LSCLK__LSCLK,
-	MX25_PAD_OE_ACD__OE_ACD,
-	MX25_PAD_CONTRAST__CONTRAST,
-	/* LCD_PWR */
-	MX25_PAD_PWM__GPIO_1_26,
-	/* LED */
-	MX25_PAD_POWER_FAIL__GPIO_3_19,
-	/* SWITCH */
-	MX25_PAD_VSTBY_ACK__GPIO_3_18,
-	/* UART2 */
-	MX25_PAD_UART2_RTS__UART2_RTS,
-	MX25_PAD_UART2_CTS__UART2_CTS,
-	MX25_PAD_UART2_TXD__UART2_TXD,
-	MX25_PAD_UART2_RXD__UART2_RXD,
-	/* SD1 */
-	MX25_PAD_SD1_CMD__SD1_CMD,
-	MX25_PAD_SD1_CLK__SD1_CLK,
-	MX25_PAD_SD1_DATA0__SD1_DATA0,
-	MX25_PAD_SD1_DATA1__SD1_DATA1,
-	MX25_PAD_SD1_DATA2__SD1_DATA2,
-	MX25_PAD_SD1_DATA3__SD1_DATA3,
-	/* SD1 CD */
-	MX25_PAD_DE_B__GPIO_2_20,
-	/* I2S */
-	MX25_PAD_KPP_COL3__AUD5_TXFS,
-	MX25_PAD_KPP_COL2__AUD5_TXC,
-	MX25_PAD_KPP_COL1__AUD5_RXD,
-	MX25_PAD_KPP_COL0__AUD5_TXD,
-	/* CAN */
-	MX25_PAD_GPIO_D__CAN2_RX,
-	MX25_PAD_GPIO_C__CAN2_TX,
-	/* SPI1 */
-	MX25_PAD_CSPI1_MOSI__CSPI1_MOSI,
-	MX25_PAD_CSPI1_MISO__CSPI1_MISO,
-	MX25_PAD_CSPI1_SS0__GPIO_1_16,
-	MX25_PAD_CSPI1_SS1__GPIO_1_17,
-	MX25_PAD_CSPI1_SCLK__CSPI1_SCLK,
-	MX25_PAD_CSPI1_RDY__GPIO_2_22,
-};
-
-#define GPIO_LED1		IMX_GPIO_NR(3, 19)
-#define GPIO_SWITCH1	IMX_GPIO_NR(3, 18)
-#define GPIO_SD1CD		IMX_GPIO_NR(2, 20)
-#define GPIO_LCDPWR		IMX_GPIO_NR(1, 26)
-#define	GPIO_SPI1_SS0	IMX_GPIO_NR(1, 16)
-#define	GPIO_SPI1_SS1	IMX_GPIO_NR(1, 17)
-#define	GPIO_SPI1_IRQ	IMX_GPIO_NR(2, 22)
-
-static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
-	{
-		.mode	= {
-			.name		= "CMO-QVGA",
-			.refresh	= 60,
-			.xres		= 320,
-			.yres		= 240,
-			.pixclock	= KHZ2PICOS(6500),
-			.left_margin	= 30,
-			.right_margin	= 38,
-			.upper_margin	= 20,
-			.lower_margin	= 3,
-			.hsync_len	= 15,
-			.vsync_len	= 4,
-		},
-		.bpp	= 16,
-		.pcr	= 0xCAD08B80,
-	}, {
-		.mode = {
-			.name		= "DVI-VGA",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 32000,
-			.hsync_len	= 7,
-			.left_margin	= 100,
-			.right_margin	= 100,
-			.vsync_len	= 7,
-			.upper_margin	= 7,
-			.lower_margin	= 100,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "DVI-SVGA",
-			.refresh	= 60,
-			.xres		= 800,
-			.yres		= 600,
-			.pixclock	= 25000,
-			.hsync_len	= 7,
-			.left_margin	= 75,
-			.right_margin	= 75,
-			.vsync_len	= 7,
-			.upper_margin	= 7,
-			.lower_margin	= 75,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	},
-};
-
-static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
-	.mode		= eukrea_mximxsd_modes,
-	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00040060,
-};
-
-static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(GPIO_LCDPWR, 1);
-	else
-		gpio_direction_output(GPIO_LCDPWR, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
-	.set_power		= eukrea_mbimxsd_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.platform_data	= &eukrea_mbimxsd_lcd_power_data,
-};
-
-static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_LED1,
-	},
-};
-
-static const struct gpio_led_platform_data
-		eukrea_mbimxsd_led_info __initconst = {
-	.leds		= eukrea_mbimxsd_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
-	{
-		.gpio		= GPIO_SWITCH1,
-		.code		= BTN_0,
-		.desc		= "BP1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data
-		eukrea_mbimxsd_button_data __initconst = {
-	.buttons	= eukrea_mbimxsd_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_mbimxsd_lcd_powerdev,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
-	.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
-	.cd_gpio = GPIO_SD1CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_NONE,
-};
-
-static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = {
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.mode = SPI_MODE_0,
-	},
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-	},
-};
-
-static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
-
-static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = {
-	.chipselect     = eukrea_mbimxsd25_spi_cs,
-	.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs),
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx25 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd25_baseboard_init(void)
-{
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
-			ARRAY_SIZE(eukrea_mbimxsd_pads)))
-		printk(KERN_ERR "error setting mbimxsd pads !\n");
-
-	imx25_add_imx_uart1(&uart_pdata);
-	imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
-	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
-
-	imx25_add_flexcan1();
-	imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
-
-	gpio_request(GPIO_LED1, "LED1");
-	gpio_direction_output(GPIO_LED1, 1);
-	gpio_free(GPIO_LED1);
-
-	gpio_request(GPIO_SWITCH1, "SWITCH1");
-	gpio_direction_input(GPIO_SWITCH1);
-	gpio_free(GPIO_SWITCH1);
-
-	gpio_request(GPIO_LCDPWR, "LCDPWR");
-	gpio_direction_output(GPIO_LCDPWR, 1);
-
-	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
-	gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
-	gpio_direction_input(GPIO_SPI1_IRQ);
-	gpio_free(GPIO_SPI1_IRQ);
-	imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data);
-	spi_register_board_info(eukrea_mbimxsd25_spi_board_info,
-		ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info));
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
-	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
-	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
deleted file mode 100644
index 0263219..0000000
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ /dev/null
@@ -1,172 +0,0 @@ 
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- * Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/memory.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx25.h"
-#include "ehci.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx25.h"
-#include "mx25.h"
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const iomux_v3_cfg_t eukrea_cpuimx25_pads[] __initconst = {
-	/* FEC - RMII */
-	MX25_PAD_FEC_MDC__FEC_MDC,
-	MX25_PAD_FEC_MDIO__FEC_MDIO,
-	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
-	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
-	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
-	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
-	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
-	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
-	/* I2C1 */
-	MX25_PAD_I2C1_CLK__I2C1_CLK,
-	MX25_PAD_I2C1_DAT__I2C1_DAT,
-};
-
-static const struct fec_platform_data mx25_fec_pdata __initconst = {
-	.phy	= PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct mxc_nand_platform_data
-eukrea_cpuimx25_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static const struct imxi2c_platform_data
-eukrea_cpuimx25_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
-{
-	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data otg_pdata __initconst = {
-	.init	= eukrea_cpuimx25_otg_init,
-	.portsc	= MXC_EHCI_MODE_UTMI,
-};
-
-static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
-{
-	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
-			MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
-	.init	= eukrea_cpuimx25_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_SERIAL,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_UTMI,
-	.workaround     = FLS_USB2_WORKAROUND_ENGCM09152,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx25_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = true;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = false;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
-
-static void __init eukrea_cpuimx25_init(void)
-{
-	imx25_soc_init();
-
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
-			ARRAY_SIZE(eukrea_cpuimx25_pads)))
-		printk(KERN_ERR "error setting cpuimx25 pads !\n");
-
-	imx25_add_imx_uart0(&uart_pdata);
-	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
-	imx25_add_imxdi_rtc();
-	imx25_add_fec(&mx25_fec_pdata);
-	imx25_add_imx2_wdt();
-
-	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
-	imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
-
-	if (otg_mode_host)
-		imx25_add_mxc_ehci_otg(&otg_pdata);
-	else
-		imx25_add_fsl_usb2_udc(&otg_device_pdata);
-
-	imx25_add_mxc_ehci_hs(&usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
-	eukrea_mbimxsd25_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx25_timer_init(void)
-{
-	mx25_clocks_init();
-}
-
-MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
-	/* Maintainer: Eukrea Electromatique */
-	.atag_offset = 0x100,
-	.map_io = mx25_map_io,
-	.init_early = imx25_init_early,
-	.init_irq = mx25_init_irq,
-	.init_time = eukrea_cpuimx25_timer_init,
-	.init_machine = eukrea_cpuimx25_init,
-	.restart	= mxc_restart,
-MACHINE_END