@@ -693,6 +693,7 @@ The following options need to be configured:
NOTE: The following can be machine specific errata. These
do have ability to provide rudimentary version and machine
specific checks, but expect no product checks.
+ CONFIG_ARM_ERRATA_454179
CONFIG_ARM_ERRATA_798870
- Driver Model
@@ -21,3 +21,9 @@ void __weak v7_arch_cp15_set_l2aux_ctrl(u32 l2actlr, u32 cpu_midr,
{
asm volatile ("mcr p15, 1, %0, c15, c0, 0\n\t" : : "r"(l2actlr));
}
+
+void __weak v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
+ u32 cpu_variant, u32 cpu_rev)
+{
+ asm volatile ("mcr p15, 0, %0, c1, c0, 1\n\t" : : "r"(acr));
+}
@@ -189,6 +189,19 @@ ENTRY(cpu_init_cp15)
skip_errata_798870:
#endif
+#ifdef CONFIG_ARM_ERRATA_454179
+ cmp r2, #0x21 @ Only on < r2p1
+ bge skip_errata_454179
+
+ mrc p15, 0, r0, c1, c0, 1 @ Read ACR
+ orr r0, r0, #(0x3 << 6) @ Set DBSM(BIT7) and IBE(BIT6) bits
+ push {r1-r5} @ Save the cpu info registers
+ bl v7_arch_cp15_set_acr
+ pop {r1-r5} @ Restore the cpu info - fall through
+
+skip_errata_454179:
+#endif
+
mov pc, r5 @ back to my caller
ENDPROC(cpu_init_cp15)
@@ -141,6 +141,8 @@ extern char __secure_end[];
void v7_arch_cp15_set_l2aux_ctrl(u32 l2auxctrl, u32 cpu_midr,
u32 cpu_rev_comb, u32 cpu_variant,
u32 cpu_rev);
+void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
+ u32 cpu_variant, u32 cpu_rev);
#endif /* ! __ASSEMBLY__ */
#endif
454179: Stale prediction may inhibit target address misprediction on next predicted taken branch Impacts: Every Cortex-A8 processors with revision lower than r2p1 Work around: Set IBE and disable branch size mispredict to 1 Also provide a hook for SoC specific handling to take place if needed. Based on ARM errata Document revision 20.0 (13 Nov 2010) Signed-off-by: Nishanth Menon <nm@ti.com> --- Change since V4: - push and pop r5 too - bl to handler instead of b README | 1 + arch/arm/cpu/armv7/cp15.c | 6 ++++++ arch/arm/cpu/armv7/start.S | 13 +++++++++++++ arch/arm/include/asm/armv7.h | 2 ++ 4 files changed, 22 insertions(+)