diff mbox

[02/17] crypto: talitos - Externalise specific SEC2 reset actions

Message ID 20150305164606.637E61A241D@localhost.localdomain (mailing list archive)
State Not Applicable
Headers show

Commit Message

Christophe Leroy March 5, 2015, 4:46 p.m. UTC
During init and reset, some actions are different between SEC1 and SEC2
This patch isolates them in small helper functions that we will be able
to redefine for SEC1

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>

---
 drivers/crypto/talitos.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index ebbae8d..e3a2d75 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -88,9 +88,8 @@  static void unmap_single_talitos_ptr(struct device *dev,
 			 be16_to_cpu(talitos_ptr->len), dir);
 }
 
-static int reset_channel(struct device *dev, int ch)
+static unsigned int do_reset_channel(struct talitos_private *priv, int ch)
 {
-	struct talitos_private *priv = dev_get_drvdata(dev);
 	unsigned int timeout = TALITOS_TIMEOUT;
 
 	setbits32(priv->chan[ch].reg + TALITOS_CCCR, TALITOS_CCCR_RESET);
@@ -99,6 +98,14 @@  static int reset_channel(struct device *dev, int ch)
 	       && --timeout)
 		cpu_relax();
 
+	return timeout;
+}
+
+static int reset_channel(struct device *dev, int ch)
+{
+	struct talitos_private *priv = dev_get_drvdata(dev);
+	unsigned int timeout = do_reset_channel(priv, ch);
+
 	if (timeout == 0) {
 		dev_err(dev, "failed to reset channel %d\n", ch);
 		return -EIO;
@@ -144,6 +151,12 @@  static int reset_device(struct device *dev)
 /*
  * Reset and initialize the device
  */
+static void do_init_device(struct talitos_private *priv)
+{
+	setbits32(priv->reg + TALITOS_IMR, TALITOS_IMR_INIT);
+	setbits32(priv->reg + TALITOS_IMR_LO, TALITOS_IMR_LO_INIT);
+}
+
 static int init_device(struct device *dev)
 {
 	struct talitos_private *priv = dev_get_drvdata(dev);
@@ -171,8 +184,7 @@  static int init_device(struct device *dev)
 	}
 
 	/* enable channel done and error interrupts */
-	setbits32(priv->reg + TALITOS_IMR, TALITOS_IMR_INIT);
-	setbits32(priv->reg + TALITOS_IMR_LO, TALITOS_IMR_LO_INIT);
+	do_init_device(priv);
 
 	/* disable integrity check error interrupts (use writeback instead) */
 	if (priv->features & TALITOS_FTR_HW_AUTH_CHECK)