mbox

[U-Boot,PULL] Please pull u-boot-imx

Message ID 54F825C7.9030900@denx.de
State Accepted
Delegated to: Tom Rini
Headers show

Pull-request

git://www.denx.de/git/u-boot-imx.git master

Message

Stefano Babic March 5, 2015, 9:45 a.m. UTC
Hi Tom,

please pull from u-boot-imx, thanks !


The following changes since commit 1606b34aa50804227806971dbb6b82ea0bf81f55:

  Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
(2015-02-25 18:14:18 -0500)

are available in the git repository at:


  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 32df39c741788e8637cffe6633d73594b26d70fb:

  mx5: fix get_reset_cause (2015-03-05 10:29:27 +0100)

----------------------------------------------------------------
Christian Gmeiner (2):
      cmd_eeprom: make it possible to define the used i2c bus
      ot1200: add eeprom command to non-SPL build

Eric Nelson (2):
      ARM: i.MX: provide access to reset cause through get_imx_reset_cause()
      nitrogen6x: set environment variable reset_cause

Fabio Estevam (9):
      mc34704: Add the definition of ONOFFA bit
      mx25pdk: Turn on the LCD supply
      mx31: Fix boot hang by avoiding vector relocation
      mx35: Fix boot hang by avoiding vector relocation
      mx6sabre: Enable User Mass Storage
      mx6sabre: Select CMD_EXT4 options
      mx6slevk: Provide a proper pad configuration for OTG1_ID pin
      warp: Add USB Mass Storage support
      warp: Select BOUNCE_BUFFER and CMD_EXT options

Otavio Salvador (4):
      mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V
      mmc: fsl_esdhc: Add support to force VSELECT set
      imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use
      warp: Add initial WaRP Board support

Peng Fan (7):
      pmic:pfuze implement pmic_mode_init
      imx:mx6 set normal APS and standby PFM mode
      ARM: imx6: disable bandgap self-bias after boot
      ARM: imx6 Add WDOG3 for i.MX6SX
      imx:mx6sl add I2c pad settings
      imx:mx6slevk add pmic and i2c configuration
      imx:mx6slevk implement power init board

Raul Cardenas (1):
      imx6: Added DEK blob generator command

Soeren Moch (2):
      board: tbs2910: Gate clock when switching async clock muxes
      board: tbs2910: Enable USB Mass Storage support

Stefano Babic (4):
      pmic: fix missing SWITCH_SIZE
      Merge branch 'master' of git://git.denx.de/u-boot
      Merge branch 'master' of git://git.denx.de/u-boot
      mx5: fix get_reset_cause

 README                                        |   3 ++
 arch/arm/Kconfig                              |   5 ++
 arch/arm/cpu/arm1136/mx31/Makefile            |   4 ++
 arch/arm/cpu/arm1136/mx31/relocate.S          |  23 ++++++++
 arch/arm/cpu/arm1136/mx35/Makefile            |   4 ++
 arch/arm/cpu/arm1136/mx35/relocate.S          |  23 ++++++++
 arch/arm/cpu/armv7/mx6/soc.c                  |  29 ++++++++++
 arch/arm/imx-common/Makefile                  |   1 +
 arch/arm/imx-common/cmd_dek.c                 |  91
+++++++++++++++++++++++++++++++
 arch/arm/imx-common/cpu.c                     |  10 +++-
 arch/arm/imx-common/timer.c                   |  17 ++++++
 arch/arm/include/asm/arch-imx/cpu.h           |   2 +
 arch/arm/include/asm/arch-mx5/sys_proto.h     |   1 -
 arch/arm/include/asm/arch-mx6/crm_regs.h      |   2 +
 arch/arm/include/asm/arch-mx6/imx-regs.h      |   4 ++
 arch/arm/include/asm/arch-mx6/mx6sl_pins.h    |  10 ++++
 board/boundary/nitrogen6x/nitrogen6x.c        |   1 +
 board/freescale/common/pfuze.c                |  38 +++++++++++++
 board/freescale/common/pfuze.h                |   1 +
 board/freescale/mx25pdk/mx25pdk.c             |   4 +-
 board/freescale/mx53loco/mx53loco.c           |  16 ------
 board/freescale/mx6qsabreauto/mx6qsabreauto.c |   6 +++
 board/freescale/mx6sabresd/mx6sabresd.c       |   6 ++-
 board/freescale/mx6slevk/mx6slevk.c           |  49 ++++++++++++++++-
 board/freescale/mx6sxsabresd/mx6sxsabresd.c   |   6 ++-
 board/tbs/tbs2910/tbs2910.c                   |  28 +++++-----
 board/warp/Kconfig                            |  12 +++++
 board/warp/MAINTAINERS                        |   6 +++
 board/warp/Makefile                           |   8 +++
 board/warp/warp.c                             | 119
+++++++++++++++++++++++++++++++++++++++++
 common/cmd_eeprom.c                           |   6 +++
 configs/warp_defconfig                        |   3 ++
 doc/README.fsl-esdhc                          |   1 +
 doc/README.mxc_hab                            |  48 +++++++++++++++++
 drivers/crypto/fsl/Makefile                   |   2 +-
 drivers/crypto/fsl/desc.h                     |  15 ++++++
 drivers/crypto/fsl/fsl_blob.c                 |  52 ++++++++++++++++++
 drivers/crypto/fsl/jobdesc.c                  | 149
++++++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/crypto/fsl/jobdesc.h                  |  14 +++++
 drivers/crypto/fsl/jr.c                       |  31 +++++++++--
 drivers/mmc/fsl_esdhc.c                       |  33 +++++++++---
 include/configs/mx53loco.h                    |   2 +
 include/configs/mx6sabre_common.h             |  16 ++++++
 include/configs/mx6slevk.h                    |  12 +++++
 include/configs/ot1200.h                      |  10 ++++
 include/configs/tbs2910.h                     |  13 +++++
 include/configs/warp.h                        | 228
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 include/fsl_esdhc.h                           |   2 +
 include/fsl_sec.h                             |  78
+++++++++++++++++++++++++--
 include/mc34704.h                             |   1 +
 include/mmc.h                                 |   1 +
 include/power/pfuze100_pmic.h                 |   2 +
 52 files changed, 1196 insertions(+), 52 deletions(-)
 create mode 100644 arch/arm/cpu/arm1136/mx31/relocate.S
 create mode 100644 arch/arm/cpu/arm1136/mx35/relocate.S
 create mode 100644 arch/arm/imx-common/cmd_dek.c
 create mode 100644 board/warp/Kconfig
 create mode 100644 board/warp/MAINTAINERS
 create mode 100644 board/warp/Makefile
 create mode 100644 board/warp/warp.c
 create mode 100644 configs/warp_defconfig
 create mode 100644 include/configs/warp.h

Comments

Tom Rini March 5, 2015, 2 p.m. UTC | #1
On Thu, Mar 05, 2015 at 10:45:43AM +0100, Stefano Babic wrote:

> Hi Tom,
> 
> please pull from u-boot-imx, thanks !
> 
> 
> The following changes since commit 1606b34aa50804227806971dbb6b82ea0bf81f55:
> 
>   Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq
> (2015-02-25 18:14:18 -0500)
> 
> are available in the git repository at:
> 
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 32df39c741788e8637cffe6633d73594b26d70fb:
> 
>   mx5: fix get_reset_cause (2015-03-05 10:29:27 +0100)
> 

Applied to u-boot/master, thanks!