diff mbox

[net-next,10/18] i40e: Add FW check to disable DCB and wrap autoneg workaround with FW check

Message ID 1425122989-354-11-git-send-email-jeffrey.t.kirsher@intel.com
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

Kirsher, Jeffrey T Feb. 28, 2015, 11:29 a.m. UTC 
From: Anjali Singhai Jain <anjali.singhai@intel.com>

For FW < 4.33 DCB should be disabled.
Also Autoneg workaround to avoid Rx stall is still needed for FW < 4.33.

Change-ID: Iff36ad86be2f597e7701096014d6d094332a9a21
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 31 ++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 12 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 7509048..3a476956 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4577,6 +4577,11 @@  static int i40e_init_pf_dcb(struct i40e_pf *pf)
 	struct i40e_hw *hw = &pf->hw;
 	int err = 0;
 
+	/* Do not enable DCB for SW1 and SW2 images even if the FW is capable */
+	if (((pf->hw.aq.fw_maj_ver == 4) && (pf->hw.aq.fw_min_ver < 33)) ||
+	    (pf->hw.aq.fw_maj_ver < 4))
+		goto out;
+
 	/* Get the initial DCB configuration */
 	err = i40e_init_dcb(hw);
 	if (!err) {
@@ -6337,13 +6342,14 @@  static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
 		}
 	}
 
-	msleep(75);
-	ret = i40e_aq_set_link_restart_an(&pf->hw, true, NULL);
-	if (ret) {
-		dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n",
-			 pf->hw.aq.asq_last_status);
+	if (((pf->hw.aq.fw_maj_ver == 4) && (pf->hw.aq.fw_min_ver < 33)) ||
+	    (pf->hw.aq.fw_maj_ver < 4)) {
+		msleep(75);
+		ret = i40e_aq_set_link_restart_an(&pf->hw, true, NULL);
+		if (ret)
+			dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n",
+				 pf->hw.aq.asq_last_status);
 	}
-
 	/* reinit the misc interrupt */
 	if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 		ret = i40e_setup_misc_vector(pf);
@@ -9703,13 +9709,14 @@  static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		dev_info(&pf->pdev->dev, "set phy mask fail, aq_err %d\n", err);
 
-	msleep(75);
-	err = i40e_aq_set_link_restart_an(&pf->hw, true, NULL);
-	if (err) {
-		dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n",
-			 pf->hw.aq.asq_last_status);
+	if (((pf->hw.aq.fw_maj_ver == 4) && (pf->hw.aq.fw_min_ver < 33)) ||
+	    (pf->hw.aq.fw_maj_ver < 4)) {
+		msleep(75);
+		err = i40e_aq_set_link_restart_an(&pf->hw, true, NULL);
+		if (err)
+			dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n",
+				 pf->hw.aq.asq_last_status);
 	}
-
 	/* The main driver is (mostly) up and happy. We need to set this state
 	 * before setting up the misc vector or we get a race and the vector
 	 * ends up disabled forever.