@@ -43,6 +43,9 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto generic
_supported_os Linux
+# refcount_bits must be at least 4 so we can create ten internal snapshots
+# (1 bit supports none, 2 bits support two, 4 bits support 14)
+_unsupported_imgopts 'refcount_bits=\(1\|2\)[^0-9]'
echo
echo "creating image"
@@ -43,6 +43,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto generic
_supported_os Linux
+# Internal snapshots are (currently) impossible with refcount_bits=1
+_unsupported_imgopts 'refcount_bits=1[^0-9]'
echo
echo "creating image"
@@ -46,6 +46,13 @@ _supported_proto file
_supported_os Linux
_default_cache_mode "writethrough"
_supported_cache_modes "writethrough" "none"
+# The refcount table tests expect a certain minimum width for refcount entries
+# (so that the refcount table actually needs to grow); that minimum is 16 bits,
+# being the default refcount entry width.
+# 32 and 64 bits do not work either, however, due to different leaked cluster
+# count on error.
+# Thus, the only remaining option is refcount_bits=16.
+_unsupported_imgopts 'refcount_bits=\([^1]\|.\([^6]\|$\)\)'
echo "Errors while writing 128 kB"
echo
@@ -44,6 +44,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto generic
_supported_os Linux
+# Internal snapshots are (currently) impossible with refcount_bits=1
+_unsupported_imgopts 'refcount_bits=1[^0-9]'
offset_size=24
offset_l1_size=36
@@ -41,6 +41,9 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto file
_supported_os Linux
+# A compat=0.10 image is created in this test which does not support anything
+# other than refcount_bits=16
+_unsupported_imgopts 'refcount_bits=\([^1]\|.\([^6]\|$\)\)'
function do_run_qemu()
{
@@ -89,6 +89,8 @@ _supported_fmt qcow2
_supported_proto file
_supported_os Linux
_require_command QEMU_NBD
+# Internal snapshots are (currently) impossible with refcount_bits=1
+_unsupported_imgopts 'refcount_bits=1[^0-9]'
# Use -f raw instead of -f $IMGFMT for the NBD connection
QEMU_IO_NBD="$QEMU_IO -f raw --cache=$CACHEMODE"
@@ -35,6 +35,8 @@ status=1 # failure is the default!
_supported_fmt qcow2
_supported_proto file
_supported_os Linux
+# Because anything other than 16 would change the output of query-block
+_unsupported_imgopts 'refcount_bits=\([^1]\|.\([^6]\|$\)\)'
function do_run_qemu()
{
@@ -42,19 +42,13 @@ _supported_fmt qcow2
_supported_proto file nfs
_supported_os Linux
-function test_qemu_img()
-{
- echo qemu-img "$@" | _filter_testdir
- $QEMU_IMG "$@" 2>&1 | _filter_testdir
- echo
-}
-
echo "=== Check option preallocation and cluster_size ==="
echo
cluster_sizes="16384 32768 65536 131072 262144 524288 1048576 2097152 4194304"
for s in $cluster_sizes; do
- test_qemu_img create -f $IMGFMT -o preallocation=metadata,cluster_size=$s "$TEST_IMG" 4G
+ IMGOPTS=$(_optstr_add "$IMGOPTS" "preallocation=metadata,cluster_size=$s") \
+ _make_test_img 4G
done
# success, all done
@@ -1,32 +1,14 @@
QA output created by 079
=== Check option preallocation and cluster_size ===
-qemu-img create -f qcow2 -o preallocation=metadata,cluster_size=16384 TEST_DIR/t.qcow2 4G
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=4294967296 encryption=off cluster_size=16384 preallocation='metadata' lazy_refcounts=off
-
-qemu-img create -f qcow2 -o preallocation=metadata,cluster_size=32768 TEST_DIR/t.qcow2 4G
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=4294967296 encryption=off cluster_size=32768 preallocation='metadata' lazy_refcounts=off
-
-qemu-img create -f qcow2 -o preallocation=metadata,cluster_size=65536 TEST_DIR/t.qcow2 4G
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=4294967296 encryption=off cluster_size=65536 preallocation='metadata' lazy_refcounts=off
-
-qemu-img create -f qcow2 -o preallocation=metadata,cluster_size=131072 TEST_DIR/t.qcow2 4G
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=4294967296 encryption=off cluster_size=131072 preallocation='metadata' lazy_refcounts=off
-
-qemu-img create -f qcow2 -o preallocation=metadata,cluster_size=262144 TEST_DIR/t.qcow2 4G
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=4294967296 encryption=off cluster_size=262144 preallocation='metadata' lazy_refcounts=off
-
-qemu-img create -f qcow2 -o preallocation=metadata,cluster_size=524288 TEST_DIR/t.qcow2 4G
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=4294967296 encryption=off cluster_size=524288 preallocation='metadata' lazy_refcounts=off
-
-qemu-img create -f qcow2 -o preallocation=metadata,cluster_size=1048576 TEST_DIR/t.qcow2 4G
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=4294967296 encryption=off cluster_size=1048576 preallocation='metadata' lazy_refcounts=off
-
-qemu-img create -f qcow2 -o preallocation=metadata,cluster_size=2097152 TEST_DIR/t.qcow2 4G
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=4294967296 encryption=off cluster_size=2097152 preallocation='metadata' lazy_refcounts=off
-
-qemu-img create -f qcow2 -o preallocation=metadata,cluster_size=4194304 TEST_DIR/t.qcow2 4G
-qemu-img: TEST_DIR/t.qcow2: Cluster size must be a power of two between 512 and 2048k
-Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=4294967296 encryption=off cluster_size=4194304 preallocation='metadata' lazy_refcounts=off
-
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation='metadata'
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation='metadata'
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation='metadata'
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation='metadata'
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation='metadata'
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation='metadata'
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation='metadata'
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation='metadata'
+qemu-img: TEST_DIR/t.IMGFMT: Cluster size must be a power of two between 512 and 2048k
+Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=4294967296 preallocation='metadata'
*** done
@@ -42,6 +42,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto file
_supported_os Linux
+# Internal snapshots are (currently) impossible with refcount_bits=1
+_unsupported_imgopts 'refcount_bits=1[^0-9]'
header_size=104
@@ -41,6 +41,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto file
_supported_os Linux
+# Because anything other than 16 would change the output of qemu_io -c info
+_unsupported_imgopts 'refcount_bits=\([^1]\|.\([^6]\|$\)\)'
# Using an image filename containing quotation marks will render the JSON data
# below invalid. In that case, we have little choice but simply not to run this
@@ -43,6 +43,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto file
_supported_os Linux
+# This test directly modifies a refblock so it relies on refcount_bits being 16
+_unsupported_imgopts 'refcount_bits=\([^1]\|.\([^6]\|$\)\)'
echo
echo '=== Repairing an image without any refcount table ==='
@@ -192,7 +192,8 @@ _filter_img_create()
-e "s# block_size=[0-9]\\+##g" \
-e "s# block_state_zero=\\(on\\|off\\)##g" \
-e "s# log_size=[0-9]\\+##g" \
- -e "s/archipelago:a/TEST_DIR\//g"
+ -e "s/archipelago:a/TEST_DIR\//g" \
+ -e "s# refcount_bits=[0-9]\\+##g"
}
_filter_img_info()