diff mbox

[U-Boot,4/4] arm: rmobile: silk: Add support SDHI

Message ID 1424796946-12664-1-git-send-email-vladimir.barinov@cogentembedded.com
State Accepted, archived
Delegated to: Nobuhiro Iwamatsu
Headers show

Commit Message

Vladimir Barinov Feb. 24, 2015, 4:55 p.m. UTC 
This adds GPIO configuration and initialization function of SDHI on Silk board

Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
---
 board/renesas/silk/silk.c | 35 ++++++++++++++++++++++++++++++++++-
 configs/silk_defconfig    |  1 +
 include/configs/silk.h    |  3 +++
 3 files changed, 38 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/board/renesas/silk/silk.c b/board/renesas/silk/silk.c
index 1838c4b..021baab 100644
--- a/board/renesas/silk/silk.c
+++ b/board/renesas/silk/silk.c
@@ -20,6 +20,7 @@ 
 #include <asm/arch/rmobile.h>
 #include <asm/arch/rcar-mstp.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/sh_sdhi.h>
 #include <netdev.h>
 #include <miiphy.h>
 #include <i2c.h>
@@ -47,6 +48,10 @@  void s_init(void)
 #define ETHER_MSTP813	(1 << 13)
 #define IIC1_MSTP323	(1 << 23)
 #define MMC0_MSTP315	(1 << 15)
+#define SDHI1_MSTP312	(1 << 12)
+
+#define SD1CKCR		0xE6150078
+#define SD1_97500KHZ	0x7
 
 int board_early_init_f(void)
 {
@@ -66,6 +71,16 @@  int board_early_init_f(void)
 	/* MMC */
 	mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
 #endif
+
+#ifdef CONFIG_SH_SDHI
+	/* SDHI1 */
+	mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SDHI1_MSTP312);
+
+	/*
+	 * Set SD1 to the 97.5MHz
+	 */
+	writel(SD1_97500KHZ, SD1CKCR);
+#endif
 	return 0;
 }
 
@@ -139,7 +154,7 @@  int board_eth_init(bd_t *bis)
 
 int board_mmc_init(bd_t *bis)
 {
-	int ret = 0;
+	int ret = -ENODEV;
 
 #ifdef CONFIG_SH_MMCIF
 	/* MMC0 */
@@ -148,6 +163,24 @@  int board_mmc_init(bd_t *bis)
 
 	ret = mmcif_mmc_init();
 #endif
+
+#ifdef CONFIG_SH_SDHI
+	gpio_request(GPIO_FN_SD1_DATA0, NULL);
+	gpio_request(GPIO_FN_SD1_DATA1, NULL);
+	gpio_request(GPIO_FN_SD1_DATA2, NULL);
+	gpio_request(GPIO_FN_SD1_DATA3, NULL);
+	gpio_request(GPIO_FN_SD1_CLK, NULL);
+	gpio_request(GPIO_FN_SD1_CMD, NULL);
+	gpio_request(GPIO_FN_SD1_CD, NULL);
+
+	/* SDHI 1 */
+	gpio_request(GPIO_GP_4_26, NULL);
+	gpio_request(GPIO_GP_4_29, NULL);
+	gpio_direction_output(GPIO_GP_4_26, 1);
+	gpio_direction_output(GPIO_GP_4_29, 1);
+
+	ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0);
+#endif
 	return ret;
 }
 
diff --git a/configs/silk_defconfig b/configs/silk_defconfig
index 3130e93..23d4f58 100644
--- a/configs/silk_defconfig
+++ b/configs/silk_defconfig
@@ -3,3 +3,4 @@  CONFIG_RMOBILE=y
 CONFIG_TARGET_SILK=y
 CONFIG_DM=y
 CONFIG_DM_SERIAL=y
+CONFIG_SH_SDHI=y
diff --git a/include/configs/silk.h b/include/configs/silk.h
index 00a3158..161e0a5 100644
--- a/include/configs/silk.h
+++ b/include/configs/silk.h
@@ -101,6 +101,9 @@ 
 #define CONFIG_SH_MMCIF_ADDR	0xee200000
 #define CONFIG_SH_MMCIF_CLK	48000000
 
+/* SDHI */
+#define CONFIG_SH_SDHI_FREQ	97500000
+
 /* Module stop status bits */
 /* INTC-RT */
 #define CONFIG_SMSTP0_ENA	0x00400000