Message ID | 1424255528-1717-3-git-send-email-maxime.ripard@free-electrons.com |
---|---|
State | Not Applicable |
Headers | show |
Hi Maxime, On 18/02/2015 11:32, Maxime Ripard wrote: > The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from > Micron as its main storage. Enable it. I wanted applying your patch but it failed. Actually it depends on your other patch "ARM: mvebu: armada-385-ap: Enable USB3 port" and this patch depend on an other patch "usb: xhci: plat: Add USB phy support" which hadn't been merged. So either you send a new version which apply on 4.0-rc1, or we can wait for that "usb: xhci: plat: Add USB phy support" will be merged then I will be able applying "ARM: mvebu: armada-385-ap: Enable USB3 port" and finally this patch. As you want. Thanks, Gregory > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > > diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts > index b891b4c897f5..ee648fb19075 100644 > --- a/arch/arm/boot/dts/armada-385-db-ap.dts > +++ b/arch/arm/boot/dts/armada-385-db-ap.dts > @@ -130,6 +130,19 @@ > phy-mode = "rgmii-id"; > }; > > + nfc: flash@d0000 { > + status = "okay"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + num-cs = <1>; > + nand-ecc-strength = <4>; > + nand-ecc-step-size = <512>; > + marvell,nand-keep-config; > + marvell,nand-enable-arbiter; > + nand-on-flash-bbt; > + }; > + > usb3@f0000 { > status = "okay"; > usb-phy = <&usb3_phy>; >
On Tue, Mar 03, 2015 at 09:10:15AM +0100, Gregory CLEMENT wrote: > Hi Maxime, > > On 18/02/2015 11:32, Maxime Ripard wrote: > > The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from > > Micron as its main storage. Enable it. > > I wanted applying your patch but it failed. Actually it depends on your > other patch "ARM: mvebu: armada-385-ap: Enable USB3 port" and this patch > depend on an other patch "usb: xhci: plat: Add USB phy support" which > hadn't been merged. Hmmmm, indeed. > So either you send a new version which apply on 4.0-rc1, or we can wait for > that "usb: xhci: plat: Add USB phy support" will be merged then I will be able > applying "ARM: mvebu: armada-385-ap: Enable USB3 port" and finally this patch. > As you want. I'll send a new version. Maxime
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index b891b4c897f5..ee648fb19075 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -130,6 +130,19 @@ phy-mode = "rgmii-id"; }; + nfc: flash@d0000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + num-cs = <1>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + }; + usb3@f0000 { status = "okay"; usb-phy = <&usb3_phy>;
The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from Micron as its main storage. Enable it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)