@@ -14,6 +14,8 @@
* $Id: xircom_cb.c,v 1.33 2001/03/19 14:02:07 arjanv Exp $
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -234,7 +236,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
pci_write_config_word (pdev, PCI_STATUS,tmp16);
if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
- printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
+ pr_err("%s: failed to allocate io-region\n", __func__);
return -ENODEV;
}
@@ -245,7 +247,7 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
*/
dev = alloc_etherdev(sizeof(struct xircom_private));
if (!dev) {
- printk(KERN_ERR "xircom_probe: failed to allocate etherdev\n");
+ pr_err("%s: failed to allocate etherdev\n", __func__);
goto device_fail;
}
private = netdev_priv(dev);
@@ -253,12 +255,12 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
/* Allocate the send/receive buffers */
private->rx_buffer = pci_alloc_consistent(pdev,8192,&private->rx_dma_handle);
if (private->rx_buffer == NULL) {
- printk(KERN_ERR "xircom_probe: no memory for rx buffer \n");
+ pr_err("%s: no memory for rx buffer\n", __func__);
goto rx_buf_fail;
}
private->tx_buffer = pci_alloc_consistent(pdev,8192,&private->tx_dma_handle);
if (private->tx_buffer == NULL) {
- printk(KERN_ERR "xircom_probe: no memory for tx buffer \n");
+ pr_err("%s: no memory for tx buffer\n", __func__);
goto tx_buf_fail;
}
@@ -281,11 +283,12 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_
pci_set_drvdata(pdev, dev);
if (register_netdev(dev)) {
- printk(KERN_ERR "xircom_probe: netdevice registration failed.\n");
+ pr_err("%s: netdevice registration failed\n", __func__);
goto reg_fail;
}
- printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, pdev->revision, pdev->irq);
+ dev_info(&dev->dev, "Xircom cardbus revision %i at irq %i\n",
+ pdev->revision, pdev->irq);
/* start the transmitter to get a heartbeat */
/* TODO: send 2 dummy packets here */
transceiver_voodoo(private);
@@ -347,8 +350,10 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
#ifdef DEBUG
print_binary(status);
- printk("tx status 0x%08x 0x%08x \n",card->tx_buffer[0],card->tx_buffer[4]);
- printk("rx status 0x%08x 0x%08x \n",card->rx_buffer[0],card->rx_buffer[4]);
+ printk("tx status 0x%08x 0x%08x \n",
+ card->tx_buffer[0], card->tx_buffer[4]);
+ printk("rx status 0x%08x 0x%08x \n",
+ card->rx_buffer[0], card->rx_buffer[4]);
#endif
/* Handle shared irq and hotplug */
if (status == 0 || status == 0xffffffff) {
@@ -358,9 +363,9 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
if (link_status_changed(card)) {
int newlink;
- printk(KERN_DEBUG "xircom_cb: Link status has changed \n");
+ printk(KERN_DEBUG "xircom_cb: Link status has changed\n");
newlink = link_status(card);
- printk(KERN_INFO "xircom_cb: Link is %i mbit \n",newlink);
+ dev_info(&dev->dev, "Link is %i mbit\n", newlink);
if (newlink)
netif_carrier_on(dev);
else
@@ -457,7 +462,8 @@ static int xircom_open(struct net_device *dev)
struct xircom_private *xp = netdev_priv(dev);
int retval;
enter("xircom_open");
- printk(KERN_INFO "xircom cardbus adaptor found, registering as %s, using irq %i \n",dev->name,dev->irq);
+ pr_info("xircom cardbus adaptor found, registering as %s, using irq %i \n",
+ dev->name, dev->irq);
retval = request_irq(dev->irq, xircom_interrupt, IRQF_SHARED, dev->name, dev);
if (retval) {
leave("xircom_open - No IRQ");
@@ -770,7 +776,7 @@ static void activate_receiver(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Receiver failed to deactivate\n");
+ pr_err("Receiver failed to deactivate\n");
}
/* enable the receiver */
@@ -787,7 +793,7 @@ static void activate_receiver(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Receiver failed to re-activate\n");
+ pr_err("Receiver failed to re-activate\n");
}
leave("activate_receiver");
@@ -818,7 +824,7 @@ static void deactivate_receiver(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Receiver failed to deactivate\n");
+ pr_err("Receiver failed to deactivate\n");
}
@@ -861,7 +867,7 @@ static void activate_transmitter(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Transmitter failed to deactivate\n");
+ pr_err("Transmitter failed to deactivate\n");
}
/* enable the transmitter */
@@ -878,7 +884,7 @@ static void activate_transmitter(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Transmitter failed to re-activate\n");
+ pr_err("Transmitter failed to re-activate\n");
}
leave("activate_transmitter");
@@ -909,7 +915,7 @@ static void deactivate_transmitter(struct xircom_private *card)
udelay(50);
counter--;
if (counter <= 0)
- printk(KERN_ERR "xircom_cb: Transmitter failed to deactivate\n");
+ pr_err("Transmitter failed to deactivate\n");
}
@@ -1184,7 +1190,7 @@ static void investigate_read_descriptor(struct net_device *dev,struct xircom_pri
struct sk_buff *skb;
if (pkt_len > 1518) {
- printk(KERN_ERR "xircom_cb: Packet length %i is bogus \n",pkt_len);
+ pr_err("Packet length %i is bogus\n", pkt_len);
pkt_len = 1518;
}
@@ -1222,7 +1228,7 @@ static void investigate_write_descriptor(struct net_device *dev, struct xircom_p
status = le32_to_cpu(card->tx_buffer[4*descnr]);
#if 0
if (status & 0x8000) { /* Major error */
- printk(KERN_ERR "Major transmit error status %x \n", status);
+ pr_err("Major transmit error status %x\n", status);
card->tx_buffer[4*descnr] = 0;
netif_wake_queue (dev);
}
Convert printks to dev_<level> where a dev is available Convert printks to pr_<level> where not Coalesce format strings Change print formats with %d.dx to %0dx Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove DRV_NAME and xircom_cb from pr_<level> Convert embedded function names in logging messages to %s, __func__ Signed-off-by: Joe Perches <joe@perches.com> --- drivers/net/tulip/xircom_cb.c | 44 +++++++++++++++++++++++----------------- 1 files changed, 25 insertions(+), 19 deletions(-)