diff mbox

[U-Boot,v2] intern: Add specific offset do FAT-Filesystem

Message ID 1422965980-3545-23-git-send-email-oe5hpm@oevsv.at
State Superseded
Delegated to: Tom Rini
Headers show

Commit Message

Hannes Schmelzer Feb. 3, 2015, 12:19 p.m. UTC
on vxWorks targets the filesystem with its MBR starts from a higher offset in
the emmc flash for limiting space which is accesible by the user.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>

---
Changes for V2: None
---
 board/BuR/kwb/board.c |    6 ++++++
 disk/part_dos.c       |   11 ++++++++---
 drivers/mmc/mmc.c     |    8 ++++++++
 fs/fat/fat.c          |    5 +++--
 fs/fat/fat_write.c    |    7 ++++---
 include/part.h        |   10 +++++++++-
 6 files changed, 38 insertions(+), 9 deletions(-)

Comments

Hannes Schmelzer Feb. 3, 2015, 12:37 p.m. UTC | #1
Hi all,

please ignore this "internal" patch.
This is was an accident.

best regards,
Hannes
diff mbox

Patch

diff --git a/board/BuR/kwb/board.c b/board/BuR/kwb/board.c
index 892311e..8578c06 100644
--- a/board/BuR/kwb/board.c
+++ b/board/BuR/kwb/board.c
@@ -27,6 +27,7 @@ 
 #include <power/tps65217.h>
 #include "../common/bur_common.h"
 #include <lcd.h>
+#include <mmc.h>
 
 /* -------------------------------------------------------------------------*/
 /* -- defines for used GPIO Hardware -- */
@@ -162,6 +163,11 @@  int board_init(void)
 	gpmc_init();
 	return 0;
 }
+void board_mmc_geometry(struct mmc *mmc)
+{
+	mmc->block_dev.lba_fs = mmc->block_dev.lba - 0x2A8000;
+	mmc->block_dev.lba_offset = 0x2A8000;
+}
 
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
diff --git a/disk/part_dos.c b/disk/part_dos.c
index cf1a36e..9c34107 100644
--- a/disk/part_dos.c
+++ b/disk/part_dos.c
@@ -89,7 +89,8 @@  int test_part_dos (block_dev_desc_t *dev_desc)
 {
 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz);
 
-	if (dev_desc->block_read(dev_desc->dev, 0, 1, (ulong *) buffer) != 1)
+	if (dev_desc->block_read(dev_desc->dev, dev_desc->lba_offset, 1,
+				 (ulong *)buffer) != 1)
 		return -1;
 
 	if (test_block_type(buffer) != DOS_MBR)
@@ -108,7 +109,9 @@  static void print_partition_extended(block_dev_desc_t *dev_desc,
 	dos_partition_t *pt;
 	int i;
 
-	if (dev_desc->block_read(dev_desc->dev, ext_part_sector, 1, (ulong *) buffer) != 1) {
+	if (dev_desc->block_read(dev_desc->dev,
+				 ext_part_sector + dev_desc->lba_offset, 1,
+				 (ulong *)buffer) != 1) {
 		printf ("** Can't read partition table on %d:%d **\n",
 			dev_desc->dev, ext_part_sector);
 		return;
@@ -172,7 +175,9 @@  static int get_partition_info_extended (block_dev_desc_t *dev_desc, int ext_part
 	int i;
 	int dos_type;
 
-	if (dev_desc->block_read (dev_desc->dev, ext_part_sector, 1, (ulong *) buffer) != 1) {
+	if (dev_desc->block_read(dev_desc->dev,
+				 ext_part_sector + dev_desc->lba_offset, 1,
+				 (ulong *)buffer) != 1) {
 		printf ("** Can't read partition table on %d:%d **\n",
 			dev_desc->dev, ext_part_sector);
 		return -1;
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index b8039cd..52e8cf5 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -531,6 +531,12 @@  static int mmc_change_freq(struct mmc *mmc)
 	return 0;
 }
 
+void __weak board_mmc_geometry(struct mmc *mmc)
+{
+	mmc->block_dev.lba_fs = mmc->block_dev.lba;
+	mmc->block_dev.lba_offset = 0;
+}
+
 static int mmc_set_capacity(struct mmc *mmc, int part_num)
 {
 	switch (part_num) {
@@ -556,6 +562,8 @@  static int mmc_set_capacity(struct mmc *mmc, int part_num)
 
 	mmc->block_dev.lba = lldiv(mmc->capacity, mmc->read_bl_len);
 
+	board_mmc_geometry(mmc);
+
 	return 0;
 }
 
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index bccc3e3..46f7da6 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -49,7 +49,8 @@  static int disk_read(__u32 block, __u32 nr_blocks, void *buf)
 		return -1;
 
 	return cur_dev->block_read(cur_dev->dev,
-			cur_part_info.start + block, nr_blocks, buf);
+			cur_part_info.start + block + cur_dev->lba_offset,
+			nr_blocks, buf);
 }
 
 int fat_set_blk_dev(block_dev_desc_t *dev_desc, disk_partition_t *info)
@@ -97,7 +98,7 @@  int fat_register_device(block_dev_desc_t *dev_desc, int part_no)
 		}
 
 		info.start = 0;
-		info.size = dev_desc->lba;
+		info.size = dev_desc->lba_fs;
 		info.blksz = dev_desc->blksz;
 		info.name[0] = 0;
 		info.type[0] = 0;
diff --git a/fs/fat/fat_write.c b/fs/fat/fat_write.c
index 98b88ad..7ed656e 100644
--- a/fs/fat/fat_write.c
+++ b/fs/fat/fat_write.c
@@ -33,14 +33,15 @@  static int disk_write(__u32 block, __u32 nr_blocks, void *buf)
 	if (!cur_dev || !cur_dev->block_write)
 		return -1;
 
-	if (cur_part_info.start + block + nr_blocks >
-		cur_part_info.start + total_sector) {
+	if (cur_part_info.start + block + nr_blocks + cur_dev->lba_offset >
+		cur_part_info.start + total_sector + cur_dev->lba_offset) {
 		printf("error: overflow occurs\n");
 		return -1;
 	}
 
 	return cur_dev->block_write(cur_dev->dev,
-			cur_part_info.start + block, nr_blocks,	buf);
+			cur_part_info.start + block + cur_dev->lba_offset,
+			nr_blocks, buf);
 }
 
 /*
diff --git a/include/part.h b/include/part.h
index 8ea9b30..1f80c35 100644
--- a/include/part.h
+++ b/include/part.h
@@ -21,7 +21,15 @@  typedef struct block_dev_desc {
 #ifdef CONFIG_LBA48
 	unsigned char	lba48;		/* device can use 48bit addr (ATA/ATAPI v7) */
 #endif
-	lbaint_t	lba;		/* number of blocks */
+	lbaint_t	lba_offset;	/*
+					 * offset from which file-systems
+					 * do their work
+					 */
+	lbaint_t	lba_fs;		/*
+					 * number of blocks available to the
+					 * file-system
+					 */
+	lbaint_t	lba;		/* total number of blocks-available */
 	unsigned long	blksz;		/* block size */
 	int		log2blksz;	/* for convenience: log2(blksz) */
 	char		vendor [40+1];	/* IDE model, SCSI Vendor */