diff mbox

[U-Boot,v2] board/BuR/tseries: Chg Pinmux - enable UART1 pins

Message ID 1422965980-3545-11-git-send-email-oe5hpm@oevsv.at
State Superseded
Delegated to: Tom Rini
Headers show

Commit Message

Hannes Schmelzer Feb. 3, 2015, 12:19 p.m. UTC 
Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>

---
Changes for V2: None
---
 board/BuR/tseries/mux.c |    8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Hannes Schmelzer Feb. 3, 2015, 12:35 p.m. UTC | #1 
Hi all,

please ignore, the numbering has been lost - so i will resend V2

regards,
Hannes
diff mbox

Patch

diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c
index 330429a..2c87a63 100644
--- a/board/BuR/tseries/mux.c
+++ b/board/BuR/tseries/mux.c
@@ -25,6 +25,13 @@  static struct module_pin_mux uart0_pin_mux[] = {
 	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},
 	{-1},
 };
+static struct module_pin_mux uart1_pin_mux[] = {
+	/* UART0_RXD */
+	{OFFSET(uart1_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)},
+	/* UART0_TXD */
+	{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},
+	{-1},
+};
 #ifdef CONFIG_MMC
 static struct module_pin_mux mmc1_pin_mux[] = {
 	{OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE | PULLUP_EN)},	/* MMC1_DAT7 */
@@ -236,5 +243,6 @@  void enable_board_pin_mux(void)
 #endif
 	configure_module_pin_mux(spi0_pin_mux);
 	configure_module_pin_mux(lcd_pin_mux);
+	configure_module_pin_mux(uart1_pin_mux);
 	configure_module_pin_mux(gpIOs);
 }