diff mbox

[U-Boot,10/21] board/BuR/tseries: Chg pinmux - use free NAND Pins in non NAND-config as GPIO

Message ID 1422624324-15431-10-git-send-email-oe5hpm@oevsv.at
State Superseded
Delegated to: Tom Rini
Headers show

Commit Message

Hannes Schmelzer Jan. 30, 2015, 1:25 p.m. UTC 
On boards were we have no NAND-flash soldered, we want to use those free pins
as regular gpio.

Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
---
 board/BuR/tseries/mux.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c
index 36ee04c..330429a 100644
--- a/board/BuR/tseries/mux.c
+++ b/board/BuR/tseries/mux.c
@@ -168,7 +168,14 @@  static struct module_pin_mux gpIOs[] = {
 	{OFFSET(mcasp0_axr0),  (MODE(7) | PULLUDDIS) },
 	/* GPIO3_17 (MCASP0_AHCLKR) - ETH2_LEDY */
 	{OFFSET(mcasp0_ahclkr), (MODE(7) | PULLUDDIS) },
-
+#ifndef CONFIG_NAND
+	/* GPIO2_3 - NAND_OE */
+	{OFFSET(gpmc_oen_ren), (MODE(7) | PULLDOWN_EN | RXACTIVE)},
+	/* GPIO2_4 - NAND_WEN */
+	{OFFSET(gpmc_wen), (MODE(7) | PULLDOWN_EN | RXACTIVE)},
+	/* GPIO2_5 - NAND_BE_CLE */
+	{OFFSET(gpmc_be0n_cle), (MODE(7) | PULLDOWN_EN | RXACTIVE)},
+#endif
 	{-1},
 };