@@ -57,6 +57,7 @@ struct sti_pwm_chip {
struct regmap_field *pwm_int_en;
struct pwm_chip chip;
struct pwm_device *cur;
+ unsigned long configured;
unsigned int en_count;
struct mutex sti_pwm_lock; /* To sync between enable/disable calls */
void __iomem *mmio;
@@ -102,24 +103,6 @@ static int sti_pwm_get_prescale(struct sti_pwm_chip *pc, unsigned long period,
return 0;
}
-/* Calculate the number of PWM devices configured with a period. */
-static unsigned int sti_pwm_count_configured(struct pwm_chip *chip)
-{
- struct pwm_device *pwm;
- unsigned int ncfg = 0;
- unsigned int i;
-
- for (i = 0; i < chip->npwm; i++) {
- pwm = &chip->pwms[i];
- if (test_bit(PWMF_REQUESTED, &pwm->flags)) {
- if (pwm_get_period(pwm))
- ncfg++;
- }
- }
-
- return ncfg;
-}
-
/*
* For STiH4xx PWM IP, the PWM period is fixed to 256 local clock cycles.
* The only way to change the period (apart from changing the PWM input clock)
@@ -141,7 +124,7 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
unsigned int ncfg;
bool period_same = false;
- ncfg = sti_pwm_count_configured(chip);
+ ncfg = hweight_long(pc->configured);
if (ncfg)
period_same = (period_ns == pwm_get_period(cur));
@@ -197,6 +180,7 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
ret = regmap_field_write(pc->pwm_int_en, 0);
+ set_bit(pwm->hwpwm, &pc->configured);
pc->cur = pwm;
dev_dbg(dev, "prescale:%u, period:%i, duty:%i, pwmvalx:%u\n",
@@ -254,10 +238,18 @@ static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
mutex_unlock(&pc->sti_pwm_lock);
}
+static void sti_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct sti_pwm_chip *pc = to_sti_pwmchip(chip);
+
+ clear_bit(pwm->hwpwm, &pc->configured);
+}
+
static const struct pwm_ops sti_pwm_ops = {
.config = sti_pwm_config,
.enable = sti_pwm_enable,
.disable = sti_pwm_disable,
+ .free = sti_pwm_free,
.owner = THIS_MODULE,
};
This patch introduces a bitmap which is used to keep track of the pwm channels which have been configured in a pwm chip. The method used earlier to find the number of configured channels, was to count the pwmdevices with PWMF_REQUESTED field set and period value configured. This was not correct and failed when of_pwm_get()/pwm_get() and then pwm_config() was used. Signed-off-by: Ajit Pal Singh <ajitpal.singh@st.com> --- drivers/pwm/pwm-sti.c | 30 +++++++++++------------------- 1 files changed, 11 insertions(+), 19 deletions(-)