[OpenWrt-Devel] ar71xx: fix D-Link DIR-615 rev. C1 WLAN MAC address
diff mbox

Message ID c44314c9a60804c60a047a746220ab3c0b49ec6e.1422453418.git.mschiffer@universe-factory.net
State Accepted
Headers show

Commit Message

Matthias Schiffer Jan. 28, 2015, 1:56 p.m. UTC
Fix the WLAN MAC address to match the one printed on the label by using the
correct address from the ART instead of the address of the LAN interface.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
---
 target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

Patch
diff mbox

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
index 425be30..e55a43f 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
@@ -38,6 +38,8 @@ 
 #define DIR_615C1_CONFIG_ADDR		0x1f020000
 #define DIR_615C1_CONFIG_SIZE		0x10000
 
+#define DIR_615C1_WLAN_MAC_ADDR		0x1f3fffb4
+
 static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
 	{
 		.name		= "d-link:orange:status",
@@ -96,16 +98,16 @@  static void __init dir_615c1_setup(void)
 {
 	const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
 	u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-	u8 mac[6];
-	u8 *wlan_mac = NULL;
+	u8 mac[ETH_ALEN], wlan_mac[ETH_ALEN];
 
 	if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
 				       "lan_mac=", mac) == 0) {
 		ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
 		ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-		wlan_mac = mac;
 	}
 
+	ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615C1_WLAN_MAC_ADDR), wlan_mac);
+
 	ath79_register_mdio(0, DIR_615C1_MDIO_MASK);
 
 	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;